[Freeswitch-users] Help understand error message -- gsmopen fails
Ashish Mishra
itsme.kunnu at gmail.com
Fri Aug 23 04:49:53 MSD 2013
Hi jayanth
Since you are the first person whom i have seen working with mod_gsmopen.
Can you help me with the ways to enable freeswitch use mod_gsmopen on
ubuntu machine.
This may sound ironical that i am not answering your question rather asking
a question as a reply of your question.
I will send you the error log which i come across after loading mod_gsmopen
on freeswitch.
Hope we can together help each other.
Regards
Ashish Mishra
On Aug 23, 2013 3:12 AM, "Jayanth Acharya" <jayachar88 at gmail.com> wrote:
> Latest FS (Git HEAD, as of yesterday), cloned and built successfully with
> mod_gsmopen. Have used a fully unlocked E1550 dongle (tested in Mobile
> Partner softeware in Windows, able to make calls, send SMSs). Started FS
> with default configurations, as per Wiki instructions. Using the default
> configration for gsmopen as well (maybe, that is the problem) ???
>
> I get the highlighted errors, while loading mod_gsmopen ! My naive
> interpretation (started with FS yesterday, and no experience with Asterisk
> either), is that in the gsmopen module default config, I find:
>
> <per_interface_settings>
> <interface id="1" name="gsm01">
> <param name="controldevice_name" value="/dev/ttyUSB3"/>
> <param name="controldevice_audio_name" value="/dev/ttyUSB2"/>
>
> However from the error logs printed in FS console, I see:
>
> 4a3d1a0|4a3d1a0[(nil)|37 ][NOTICA 3056 ][none ][-1,-1,-1]
> f.tty_data_device = |/dev/ttyUSB2|
> 2013-08-22 23:29:53.007103 [NOTICE] mod_gsmopen.cpp:3057 rev
> 4a3d1a0|4a3d1a0[(nil)|37 ][NOTICA 3057 ][none ][-1,-1,-1]
> f.tty_audio_device = |/dev/ttyUSB1|
>
> Probably that is autodetected !! But how, without the IMSI/IMEI being
> specified?
>
> ---
>
> freeswitch at dabbian1> load mod_gsmopen
> 2013-08-22 23:29:51.807103 [INFO] mod_enum.c:876 ENUM Reloaded
> 2013-08-22 23:29:51.847112 [INFO] switch_time.c:1191 Timezone reloaded 530
> definitions
> 2013-08-22 23:29:52.427101 [NOTICE] mod_gsmopen.cpp:1106 rev
> 4a3d1a0|4a3d1a0[(nil)|37 ][NOTICA 1106 ][none ][-1,-1,-1] GSMOPEN
> Charset Output Test 0 èéòàù
> 2013-08-22 23:29:52.427101 [NOTICE] mod_gsmopen.cpp:1107 rev
> 4a3d1a0|4a3d1a0[(nil)|37 ][NOTICA 1107 ][none ][-1,-1,-1] GSMOPEN
> Charset Output Test 1 ç°§^£
> 2013-08-22 23:29:52.427101 [NOTICE] mod_gsmopen.cpp:1108 rev
> 4a3d1a0|4a3d1a0[(nil)|37 ][NOTICA 1108 ][none ][-1,-1,-1] GSMOPEN
> Charset Output Test 2 новости
> 2013-08-22 23:29:52.427101 [NOTICE] mod_gsmopen.cpp:1109 rev
> 4a3d1a0|4a3d1a0[(nil)|37 ][NOTICA 1109 ][none ][-1,-1,-1] GSMOPEN
> Charset Output Test 3 ﺎﻠﺠﻤﻋﺓ
> 2013-08-22 23:29:52.427101 [NOTICE] mod_gsmopen.cpp:1110 rev
> 4a3d1a0|4a3d1a0[(nil)|37 ][NOTICA 1110 ][none ][-1,-1,-1] GSMOPEN
> Charset Output Test 4 ראת
> 2013-08-22 23:29:52.427101 [NOTICE] mod_gsmopen.cpp:1111 rev
> 4a3d1a0|4a3d1a0[(nil)|37 ][NOTICA 1111 ][none ][-1,-1,-1] GSMOPEN
> Charset Output Test 5 לק
> 2013-08-22 23:29:52.427101 [NOTICE] mod_gsmopen.cpp:1112 rev
> 4a3d1a0|4a3d1a0[(nil)|37 ][NOTICA 1112 ][none ][-1,-1,-1] GSMOPEN
> Charset Output Test 6 人大
> 2013-08-22 23:29:53.007103 [NOTICE] mod_gsmopen.cpp:3053 rev
> 4a3d1a0|4a3d1a0[(nil)|37 ][NOTICA 3053 ][none ][-1,-1,-1]
> ************************************************
> 2013-08-22 23:29:53.007103 [NOTICE] mod_gsmopen.cpp:3054 rev
> 4a3d1a0|4a3d1a0[(nil)|37 ][NOTICA 3054 ][none ][-1,-1,-1]
> f.imei=|354638041679399|
> 2013-08-22 23:29:53.007103 [NOTICE] mod_gsmopen.cpp:3055 rev
> 4a3d1a0|4a3d1a0[(nil)|37 ][NOTICA 3055 ][none ][-1,-1,-1]
> f.imsi=|405034007414619|
> 2013-08-22 23:29:53.007103 [NOTICE] mod_gsmopen.cpp:3056 rev
> 4a3d1a0|4a3d1a0[(nil)|37 ][NOTICA 3056 ][none ][-1,-1,-1]
> f.tty_data_device = |/dev/ttyUSB2|
> 2013-08-22 23:29:53.007103 [NOTICE] mod_gsmopen.cpp:3057 rev
> 4a3d1a0|4a3d1a0[(nil)|37 ][NOTICA 3057 ][none ][-1,-1,-1]
> f.tty_audio_device = |/dev/ttyUSB1|
> 2013-08-22 23:29:53.007103 [NOTICE] mod_gsmopen.cpp:3058 rev
> 4a3d1a0|4a3d1a0[(nil)|37 ][NOTICA 3058 ][none ][-1,-1,-1]
> ************************************************
> 2013-08-22 23:29:53.027123 [WARNING] mod_gsmopen.cpp:1589 rev
> 4a3d1a0|4a3d1a0[(nil)|37 ][WARNINGA 1589 ][gsm01 ][-1, 0, 0]
> STARTING interface_id=1
> 2013-08-22 23:29:53.027123 [ERR] gsmopen_protocol.cpp:137 rev
> 4a3d1a0|4a3d1a0[(nil)|37 ][ERRORA 137 ][gsm01 ][-1, 0, 0] port
> /dev/ttyUSB3, NOT open
> 2013-08-22 23:29:53.027123 [ERR] mod_gsmopen.cpp:1608 rev
> 4a3d1a0|4a3d1a0[(nil)|37 ][ERRORA 1608 ][gsm01 ][-1, 0, 0]
> STARTING interface_id=1 FAILED: gsmopen_serial_init failed
>
> +OK Reloading XML
> +OK
>
> 2013-08-22 23:29:53.027123 [ERR] mod_gsmopen.cpp:2684 rev
> 4a3d1a0|4a3d1a0[(nil)|37 ][ERRORA 2684 ][gsm01 ][-1, 0, 0] ALARM
> on interface gsm01:
> freeswitch at dabbian1> 2013-08-22 23:29:53.027123 [CONSOLE]
> switch_loadable_module.c:1401 Successfully Loaded [mod_gsmopen]
> 2013-08-22 23:29:53.027123 [NOTICE] switch_loadable_module.c:147 Adding
> Endpoint 'gsmopen'
> 2013-08-22 23:29:53.027123 [NOTICE] switch_loadable_module.c:305 Adding
> API Function 'gsm'
> 2013-08-22 23:29:53.027123 [NOTICE] switch_loadable_module.c:305 Adding
> API Function 'gsmopen'
> 2013-08-22 23:29:53.027123 [NOTICE] switch_loadable_module.c:305 Adding
> API Function 'gsmopen_boost_audio'
> 2013-08-22 23:29:53.027123 [NOTICE] switch_loadable_module.c:305 Adding
> API Function 'gsmopen_dump'
> 2013-08-22 23:29:53.027123 [NOTICE] switch_loadable_module.c:305 Adding
> API Function 'gsmopen_sendsms'
> 2013-08-22 23:29:53.027123 [NOTICE] switch_loadable_module.c:417 Adding
> Chat interface 'sms'
>
> freeswitch at dabbian1>
>
> ---
>
>
> With this understanding, I went ahead and modified the gsmopen config
> file, to:
> <per_interface_settings>
> <interface id="1" name="gsm01">
> <param name="controldevice_name" value="/dev/ttyUSB2"/>
> <param name="controldevice_audio_name" value="/dev/ttyUSB1"/>
>
> then unloaded mod_gsmopen, and reloaded it, but now, I get this error:
>
> 2013-08-22 23:41:43.587104 [ERR] gsmopen_protocol.cpp:137 rev
> 4a3d1a0|4a3d1a0[(nil)|37 ][ERRORA 137 ][gsm01 ][-1, 0, 0] port
> /dev/ttyUSB3, NOT open
> 2013-08-22 23:41:43.587104 [ERR] mod_gsmopen.cpp:1608 rev
> 4a3d1a0|4a3d1a0[(nil)|37 ][ERRORA 1608 ][gsm01 ][-1, 0, 0]
> STARTING interface_id=1 FAILED: gsmopen_serial_init failed
> 2013-08-22 23:41:43.587104 [ERR] mod_gsmopen.cpp:2684 rev
> 4a3d1a0|4a3d1a0[(nil)|37 ][ERRORA 2684 ][gsm01 ][-1, 0, 0] ALARM
> on interface gsm01:
>
> What does it need /dev/ttyUSB3 for ?
>
> Maybe -- after all, my non linear progression into setting up FS and using
> it by somewhat of trial-n-error isn't helping!
>
> thanks,
> Jay
>
> _________________________________________________________________________
> Professional FreeSWITCH Consulting Services:
> consulting at freeswitch.org
> http://www.freeswitchsolutions.com
>
>
>
>
> Official FreeSWITCH Sites
> http://www.freeswitch.org
> http://wiki.freeswitch.org
> http://www.cluecon.com
>
> FreeSWITCH-users mailing list
> FreeSWITCH-users at lists.freeswitch.org
> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
> http://www.freeswitch.org
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.freeswitch.org/pipermail/freeswitch-users/attachments/20130823/39c84cab/attachment-0001.html
Join us at ClueCon 2013 Aug 6-8, 2013
More information about the FreeSWITCH-users
mailing list