[Freeswitch-users] presence on latest GIT

[Yehavi Bourvine]

Hello Vik,

  BLF behaviour is somewhat erratic since major changes done after
15-Oct-2011. I am working with Anthony to track it down (see FS-3794). It
happens mostly on our production system rather than the test system, so I
am quite limited in testing the fixes and it takes time...

Here is a sample config of phone 11111 doing BLF on 22222:

  <reginfo>
    <reg reg.1.displayName="Full name" reg.1.address="11111"
reg.1.label="11111" reg.1.type="shared" reg.1.auth.userId="11111"
reg.1.auth.password="PPPPPP" reg.1.ringType="2" />

<attendant attendant.resourceList.1.address="22222"
attendant.resourceList.1.label="22222" />
</reginfo>
Note that *ThirdPartyName* is *not* used in the REG section.

                         Regards, __Yehavi:


2012/2/9 Vik Killa <vipkilla at gmail.com>

> Would anyone be willing to share their working BLF polycom configs?
>
> On Wed, Feb 8, 2012 at 4:56 PM, Anthony Minessale
> <anthony.minessale at gmail.com> wrote:
> > It should be working but you can use that data to see why.
> > If you enable sip trace too and capture the logs, it can be used to
> > check for problems
>
> <snip>
>
> _________________________________________________________________________
> Professional FreeSWITCH Consulting Services:
> consulting at freeswitch.org
> http://www.freeswitchsolutions.com
>
> 
> 
>
> Official FreeSWITCH Sites
> http://www.freeswitch.org
> http://wiki.freeswitch.org
> http://www.cluecon.com
>
> FreeSWITCH-users mailing list
> FreeSWITCH-users at lists.freeswitch.org
> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
> http://www.freeswitch.org
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.freeswitch.org/pipermail/freeswitch-users/attachments/20120209/db5e3737/attachment.html