[Freeswitch-users] Can someone help me with a complicated configuration?

[Josue Diaz Cruz]

I have a server with 4 ETH. Each one have a different IP
In 2 cases i fixed the ip address, In the other 2 cases i have 2 cable
connections in bridge mode so i receive the public ip in dhcp mode.
 
eth0 local address 192.168.1.100
eth1 local address 192.168.2.100
eth2 public address dhcp (cable)
eth3 public address dhcp (cable)
 
I was thinking to build 4 different profiles for each eth port, but i came
to know that if we change the place of colocation it will not work properly
because the dhcp ip. It is any way to attach a profile to the eth port, not
the ip?
 
Or if you know a better way to manage this case. I would like to receive
traffic from the 2 public ip's and route it both like if i have just one
profile. 
 
Josue Diaz Cruz

Departamento Tecnico y Soporte

 <mailto:jdiaz at coinfru.com> jdiaz at coinfru.com

 

C/ Balsicas 3

Alquerias | 30580 | Murcia

  <http://www.coinfru.com/> www.coinfru.com

 

 



 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.freeswitch.org/pipermail/freeswitch-users/attachments/20120208/5edda5ed/attachment.html 
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/jpeg
Size: 4705 bytes
Desc: not available
Url : http://lists.freeswitch.org/pipermail/freeswitch-users/attachments/20120208/5edda5ed/attachment.jpe