[Freeswitch-users] Conference Auto Outcall to External Numbers

Tue Feb 7 22:02:37 MSK 2012

Thanks for the reply Michael

I do have a gateway setup:

<include>
    <gateway name="Flowroute">
      <param name="username" value="**********"/>
      <param name="password" value="**********"/>
      <param name="realm" value="flowroute.com"/>
      <param name="proxy" value="sip.flowroute.com"/>
      <param name="expire-seconds" value="800"/>
      <param name="register" value="true"/>
      <param name="retry-seconds" value="60"/>
      <param name="context" value="public"/>
    </gateway>
</include>

and the SIP Status shows that the gateway is registered...

Would there need to be something in place on the xml for the conference extension to use the gateway... more so then the action application lines specifying the outbound calls?

Thanks again
________________________________
From: freeswitch-users-bounces at lists.freeswitch.org [freeswitch-users-bounces at lists.freeswitch.org] on behalf of Michael Collins [msc at freeswitch.org]
Sent: Tuesday, February 07, 2012 10:45 AM
To: FreeSWITCH Users Help
Subject: Re: [Freeswitch-users] Conference Auto Outcall to External Numbers

Do you have a gateway set up for the flowroute connection? If not, you'll need to configure one because it looks like flowroute is sending back an auth challenge. If you set up a gateway then you'll be able to respond to the auth challenge and supply the proper username/password.

-MC

On Tue, Feb 7, 2012 at 10:32 AM, Ryan Watkins <Ryan at ocens.com<mailto:Ryan at ocens.com>> wrote:
Thanks Ken!

so, I've changed the action application line to the following syntax

<action application="conference_set_auto_outcall" data="sofia/external/externalnumber@$${domain}" />

our SIP provider is flowroute, so I've also tried @sip.flowroute.com<http://sip.flowroute.com> and @flowroute.com<http://flowroute.com>

looking at the logs, I'm getting the following errors when it attempts to bridge the conference to the outbound numbers:

2012-02-07 10:16:23.214806 [ERR] sofia_reg.c:2170 Cannot locate any authentication credentials to complete an authentication request for realm '"sip.flowroute.com<http://sip.flowroute.com>"'
2012-02-07 10:16:23.214806 [DEBUG] switch_channel.c:2852 (sofia/external/13605217334<tel:13605217334>@flowroute.com<http://flowroute.com>) Callstate Change RINGING -> HANGUP
2012-02-07 10:16:23.214806 [NOTICE] sofia_reg.c:2190 Hangup sofia/external/13605217334<tel:13605217334>@flowroute.com<http://flowroute.com> [CS_CONSUME_MEDIA] [MANDATORY_IE_MISSING]

I am, however, able to make calls from a registered extension to an external number...

what does [MANDATORY_IE_MISSING] mean? and any suggestions on how to get this to work?

Thanks again!

Ryan
________________________________
From: freeswitch-users-bounces at lists.freeswitch.org<mailto:freeswitch-users-bounces at lists.freeswitch.org> [freeswitch-users-bounces at lists.freeswitch.org<mailto:freeswitch-users-bounces at lists.freeswitch.org>] on behalf of Ken Rice [krice at freeswitch.org<mailto:krice at freeswitch.org>]
Sent: Saturday, February 04, 2012 10:34 PM
To: FreeSWITCH Users Help
Subject: Re: [Freeswitch-users] Conference Auto Outcall to External Numbers

Yes... Just specify a proper dialstring just like you would any other bridge command....

On 2/4/12 9:21 PM, "Ryan Watkins" <Ryan at ocens.com<http://UrlBlockedError.aspx>> wrote:

Sorry for resending this, but need some assistance on this:

Is there a way to set a Conference Auto Outcall to numbers external of the PBX?

Thanks!

From: freeswitch-users-bounces at lists.freeswitch.org<http://UrlBlockedError.aspx> [mailto:freeswitch-users-bounces at lists.freeswitch.org] On Behalf Of Ryan Watkins
Sent: Tuesday, January 31, 2012 2:28 PM
To: FreeSWITCH Users Help
Subject: Re: [Freeswitch-users] Conference Auto Outcall to External Numbers

The call forwarding function itself works, if I set call forwarding for a specific extension and then call that extension it will ring at the forwarded external phone. Also, with call forwarding disabled on the extensions the conference auto outcall does call the internal extensions. There just seems to be a disconnect between the conference outcall to a forwarded extension. But perhaps I should rephrase the question…

The conference extension I’m needing to setup should auto outcall to a set of external numbers. I figured the way to do it would be to create internal extensions, and set the call forwarding to the external number. But perhaps there’s a better way to approach this need?

For example, the outcall user listing in the conference.xml is as follows:

<action application=”conference_set_auto_outcall” data=”user/100@$${domain}”/>

Is there a way to change the data syntax to instead direct the outbound auto call to an external number instead of an internal user?

Thanks!

From: freeswitch-users-bounces at lists.freeswitch.org<http://UrlBlockedError.aspx> [mailto:freeswitch-users-bounces at lists.freeswitch.org] On Behalf Of Michael Collins
Sent: Tuesday, January 31, 2012 1:10 PM
To: FreeSWITCH Users Help
Subject: Re: [Freeswitch-users] Conference Auto Outcall to External Numbers

What actually happens when you set the call forwarding? Console debug log w/ SIP trace would be helpful, as would any relevant configs you've got in place.

-MC

On Tue, Jan 31, 2012 at 12:46 PM, Ryan Watkins <Ryan at ocens.com<http://UrlBlockedError.aspx>> wrote:

Morning/Afternoon/Evening all…

I’ve been trying to setup a conference call that would use the auto outcall function, and it would call external numbers (like their cell). I’ve tried to setup extensions for the individuals, and set the call forwarding to their external number. Although the auto outcall function will successfully call the extensions when they are set to an internal SIP phone, when call forwarding is enabled the conference call will not call the external number. Any ideas on how to accomplish this?

Thanks a lot!

Ryan

_________________________________________________________________________
Professional FreeSWITCH Consulting Services:
consulting at freeswitch.org<http://UrlBlockedError.aspx>
http://www.freeswitchsolutions.com

Official FreeSWITCH Sites
http://www.freeswitch.org
http://wiki.freeswitch.org
http://www.cluecon.com

FreeSWITCH-users mailing list
FreeSWITCH-users at lists.freeswitch.org<http://UrlBlockedError.aspx>
http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
http://www.freeswitch.org

________________________________
_________________________________________________________________________
Professional FreeSWITCH Consulting Services:
consulting at freeswitch.org<http://UrlBlockedError.aspx>
http://www.freeswitchsolutions.com

Official FreeSWITCH Sites
http://www.freeswitch.org
http://wiki.freeswitch.org
http://www.cluecon.com

FreeSWITCH-users mailing list
FreeSWITCH-users at lists.freeswitch.org<http://UrlBlockedError.aspx>
http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
http://www.freeswitch.org

_________________________________________________________________________
Professional FreeSWITCH Consulting Services:
consulting at freeswitch.org<mailto:consulting at freeswitch.org>
http://www.freeswitchsolutions.com

Official FreeSWITCH Sites
http://www.freeswitch.org
http://wiki.freeswitch.org
http://www.cluecon.com

FreeSWITCH-users mailing list
FreeSWITCH-users at lists.freeswitch.org<mailto:FreeSWITCH-users at lists.freeswitch.org>
http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
http://www.freeswitch.org

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.freeswitch.org/pipermail/freeswitch-users/attachments/20120207/785d3fea/attachment.html 