[Freeswitch-users] fs_cli socket connection error

Anthony Minessale anthony.minessale at gmail.com
Tue Mar 1 21:11:08 MSK 2011


like I said you re-installed with a new version of libcurl but did not
fully rebuild.
So most of the modules that depend on curl were broken torn between
the old and new version it was linked to..

had you executed the 4 commands I posted yesterday it would be fine.


On Tue, Mar 1, 2011 at 11:02 AM, deniro <ayhkor at gmail.com> wrote:
> Thank you all for advice  and direction
> Will re-install from scratch at a later time.
> deniro--
>
> On Tue, Mar 1, 2011 at 4:16 AM, Steven Ayre <steveayre at gmail.com> wrote:
>>
>> Ok, you really need to pay attention to any log message that logs with
>> the CRIT (critical) log level - they're really serious errors. You
>> should look at adding the critical="true" attribute to all the tags in
>> modules.conf.xml which you want to be sure are loaded. If a module
>> fails to load without that tag FS will continue to run anyway, with
>> that tag it'll refuse to start so you'll know instantly something is
>> wrong.
>>
>> Most of your modules aren't loading, because they haven't been
>> compiled correctly. Some look like they're missing (no such file or
>> directory) and others haven't been built right (undefined symbols).
>>
>> Here are a few of the important lines from your log:
>>
>> 2011-02-28 18:12:21.910738 [CRIT] switch_loadable_module.c:882 Error
>> Loading module /opt/freeswitch/mod/mod_event_socket.so
>> **/opt/freeswitch/mod/mod_event_socket.so: undefined symbol:
>> switch_event_serialize_json**
>> 2011-02-28 18:12:21.910789 [CRIT] switch_loadable_module.c:882 Error
>> Loading module /opt/freeswitch/mod/mod_xml_curl.so
>> **/opt/freeswitch/mod/mod_xml_curl.so: cannot open shared object file:
>> No such file or directory**
>> 2011-02-28 18:12:21.910813 [CRIT] switch_loadable_module.c:882 Error
>> Loading module /opt/freeswitch/mod/mod_xml_cdr.so
>> **/opt/freeswitch/mod/mod_xml_cdr.so: cannot open shared object file:
>> No such file or directory**
>> 2011-02-28 18:12:21.911581 [CRIT] switch_loadable_module.c:882 Error
>> Loading module /opt/freeswitch/mod/mod_commands.so
>> **/opt/freeswitch/mod/mod_commands.so: undefined symbol:
>> switch_xml_reload**
>> 2011-02-28 18:12:21.911709 [CRIT] switch_loadable_module.c:882 Error
>> Loading module /opt/freeswitch/mod/mod_conference.so
>> **/opt/freeswitch/mod/mod_conference.so: undefined symbol:
>> switch_channel_test_app_flag_key**
>> 2011-02-28 18:12:21.911842 [CRIT] switch_loadable_module.c:882 Error
>> Loading module /opt/freeswitch/mod/mod_dptools.so
>> **/opt/freeswitch/mod/mod_dptools.so: undefined symbol:
>> switch_event_merge**
>> 2011-02-28 18:12:21.912264 [CRIT] switch_loadable_module.c:882 Error
>> Loading module /opt/freeswitch/mod/mod_dialplan_xml.so
>> **/opt/freeswitch/mod/mod_dialplan_xml.so: undefined symbol:
>> switch_xml_std_datetime_check**
>> 2011-02-28 18:12:21.912531 [CRIT] switch_loadable_module.c:882 Error
>> Loading module /opt/freeswitch/mod/mod_g723_1.so
>> **/opt/freeswitch/mod/mod_g723_1.so: cannot open shared object file:
>> No such file or directory**
>> 2011-02-28 18:12:21.912573 [CRIT] switch_loadable_module.c:882 Error
>> Loading module /opt/freeswitch/mod/mod_g729.so
>> **/opt/freeswitch/mod/mod_g729.so: cannot open shared object file: No
>> such file or directory**
>> 2011-02-28 18:12:21.912609 [CRIT] switch_loadable_module.c:882 Error
>> Loading module /opt/freeswitch/mod/mod_amr.so
>> **/opt/freeswitch/mod/mod_amr.so: cannot open shared object file: No
>> such file or directory**
>>
>> Important things to note:
>> mod_event_socket hasn't loaded because of a undefined symbol, it
>> wasn't built correctly
>> mod_xml_curl hasn't loaded because it doesn't exist, it was either
>> never built or never installed
>>
>> Something pretty strange has happened. Did you recompile when trying
>> to add mod_xml_curl?
>>
>> I'd suggest you delete all the FS files, including the Git clone, make
>> a fresh checkout and build it from scratch.
>>
>> -Steve
>>
>>
>>
>> On 28 February 2011 23:18, deniro <ayhkor at gmail.com> wrote:
>> > I put the log in pastebin
>> > freeswitch.log only when starting freeswitch (after stop)
>> >
>> > http://pastebin.freeswitch.org/15502
>> > thx
>> > deniro
>> > On Mon, Feb 28, 2011 at 5:46 PM, Steven Ayre <steveayre at gmail.com>
>> > wrote:
>> >>
>> >> You must check the logfile for when FS starts up - if netstat shows
>> >> nothing for port 8021 then either mod_event_socket isn't being loaded
>> >> or you'll see an error when it tries to load.
>> >>
>> >> Nothing from netstat means nothing's listening, so trying to connect
>> >> using fs_cli won't do anything.
>> >>
>> >> -Steve
>> >>
>> >>
>> >> On 28 February 2011 22:40, deniro <ayhkor at gmail.com> wrote:
>> >> > Checked the log
>> >> > Nothing is logged when
>> >> > fs_cli -d 7 -H 75.xxx.xxx.xxx -P 8021
>> >> > is issued
>> >> > /opt/freeswitch/log# tail -f freeswitch.log
>> >> >
>> >> > ls -l freeswitch.log
>> >> > -rwxrwxrwx 1 freeswitch daemon 33018 2011-02-28 17:39 freeswitch.log
>> >> > thx
>> >> >
>> >> >
>> >> >
>> >> > On Mon, Feb 28, 2011 at 3:59 PM, Peter Olsson
>> >> > <peter.olsson at visionutveckling.se> wrote:
>> >> >>
>> >> >> Check freeswitch.log, it probably reports some problem when loading
>> >> >> the
>> >> >> mod_event_socket module.
>> >> >>
>> >> >> /Peter
>> >> >> ________________________________________
>> >> >> Från: freeswitch-users-bounces at lists.freeswitch.org
>> >> >> [freeswitch-users-bounces at lists.freeswitch.org] f&#246;r deniro
>> >> >> [ayhkor at gmail.com]
>> >> >> Skickat: den 28 februari 2011 21:42
>> >> >> Till: FreeSWITCH Users Help
>> >> >> Ämne: Re: [Freeswitch-users] fs_cli socket connection error
>> >> >>
>> >> >> Steve
>> >> >> Thanks for the reply
>> >> >> netstat -anlp | grep 8021  is blank (nothing showing up)
>> >> >>
>> >> >> /opt/freeswitch/bin/fs_cli -d 7 -H 75.xxx.xxx.xxx -P 8021
>> >> >> [DEBUG] libs/esl/src/esl_config.c:56 esl_config_open_file()
>> >> >> Configuration
>> >> >> file is /root/.fs_cli_conf.
>> >> >> [DEBUG] libs/esl/src/esl_config.c:56 esl_config_open_file()
>> >> >> Configuration
>> >> >> file is /etc/fs_cli.conf.
>> >> >> [DEBUG] libs/esl/fs_cli.c:1159 main() profile default does not exist
>> >> >> using
>> >> >> builtin profile
>> >> >> [DEBUG] libs/esl/fs_cli.c:1188 main() Using profile internal
>> >> >> [75.xxx.xxx.xxx]
>> >> >> [ERROR] libs/esl/fs_cli.c:1206 main() Error Connecting [Socket
>> >> >> Connection
>> >> >> Error]
>> >> >> yes mod_event_socket is after  mod_xml_curl but I changed the order
>> >> >> in
>> >> >>  modules.conf.xml
>> >> >> still getting above (restarted freeswitch)
>> >> >>
>> >> >> thx
>> >> >> deniro--
>> >> >>
>> >> >>
>> >> >>
>> >> >> On Mon, Feb 28, 2011 at 3:35 AM, Steven Ayre
>> >> >> <steveayre at gmail.com<mailto:steveayre at gmail.com>> wrote:
>> >> >> Enable debug logging and you should see an error that'll tell you
>> >> >> more.
>> >> >>
>> >> >> Is mod_event_socket loading before or after mod_xml_curl? Chances
>> >> >> are
>> >> >> mod_xml_curl is loading first, so it's trying to read
>> >> >> event_socket.conf.xml and/or acl.conf.xml through xml_curl and
>> >> >> either
>> >> >> getting a different config to your previous local copy or the ACLs
>> >> >> are
>> >> >> different.
>> >> >>
>> >> >> What does "netstat -anlp | grep :8021" from the linux cli show you?
>> >> >> Does it show that freeswitch is actually listening on the port? If
>> >> >> it
>> >> >> is it's probably an ACL problem, if it isn't then it's probably a
>> >> >> problem with event_socket.conf.xml
>> >> >>
>> >> >> -Steve
>> >> >>
>> >> >> On 28 February 2011 00:53, deniro
>> >> >> <ayhkor at gmail.com<mailto:ayhkor at gmail.com>> wrote:
>> >> >> > What would be possible reasons for this and how to resolve?
>> >> >> > running fs 106 on ubuntu 10.04 server
>> >> >> >
>> >> >> > /opt/freeswitch/bin/fs_cli -H xxx.xxx.xxx.xxx -P 8021
>> >> >> > [ERROR] libs/esl/fs_cli.c:1206 main() Error Connecting [Socket
>> >> >> > Connection
>> >> >> > Error]
>> >> >> > was working fine before I installed  mod_xml_cdr
>> >> >> > configure --prefix=/opt/freeswitch --without-libcurl
>> >> >> > make mod_xml_cdr-install
>> >> >> > (no errors)
>> >> >> >
>> >> >> > in modules.conf.xml
>> >> >> > <load module="mod_event_socket"/>
>> >> >> >
>> >> >> > is there a packaged version of mod_xml_cdr (for fs 1.0.6)?
>> >> >> >
>> >> >> > thx
>> >> >> > deniro--
>> >> >> > _______________________________________________
>> >> >> > FreeSWITCH-users mailing list
>> >> >> >
>> >> >> >
>> >> >> >
>> >> >> > FreeSWITCH-users at lists.freeswitch.org<mailto:FreeSWITCH-users at lists.freeswitch.org>
>> >> >> > http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
>> >> >> >
>> >> >> >
>> >> >> > UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
>> >> >> > http://www.freeswitch.org<http://www.freeswitch.org/>
>> >> >> >
>> >> >> >
>> >> >>
>> >> >> _______________________________________________
>> >> >> FreeSWITCH-users mailing list
>> >> >>
>> >> >>
>> >> >>
>> >> >> FreeSWITCH-users at lists.freeswitch.org<mailto:FreeSWITCH-users at lists.freeswitch.org>
>> >> >> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
>> >> >>
>> >> >>
>> >> >> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
>> >> >> http://www.freeswitch.org<http://www.freeswitch.org/>
>> >> >>
>> >> >> !DSPAM:4d6c0a1132761029518849!
>> >> >>
>> >> >> _______________________________________________
>> >> >> FreeSWITCH-users mailing list
>> >> >> FreeSWITCH-users at lists.freeswitch.org
>> >> >> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
>> >> >>
>> >> >>
>> >> >> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
>> >> >> http://www.freeswitch.org
>> >> >
>> >> >
>> >> > _______________________________________________
>> >> > FreeSWITCH-users mailing list
>> >> > FreeSWITCH-users at lists.freeswitch.org
>> >> > http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
>> >> >
>> >> > UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
>> >> > http://www.freeswitch.org
>> >> >
>> >> >
>> >>
>> >> _______________________________________________
>> >> FreeSWITCH-users mailing list
>> >> FreeSWITCH-users at lists.freeswitch.org
>> >> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
>> >>
>> >> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
>> >> http://www.freeswitch.org
>> >
>> >
>> > _______________________________________________
>> > FreeSWITCH-users mailing list
>> > FreeSWITCH-users at lists.freeswitch.org
>> > http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
>> > UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
>> > http://www.freeswitch.org
>> >
>> >
>>
>> _______________________________________________
>> FreeSWITCH-users mailing list
>> FreeSWITCH-users at lists.freeswitch.org
>> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
>> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
>> http://www.freeswitch.org
>
>
> _______________________________________________
> FreeSWITCH-users mailing list
> FreeSWITCH-users at lists.freeswitch.org
> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
> http://www.freeswitch.org
>
>



-- 
Anthony Minessale II

FreeSWITCH http://www.freeswitch.org/
ClueCon http://www.cluecon.com/
Twitter: http://twitter.com/FreeSWITCH_wire

AIM: anthm
MSN:anthony_minessale at hotmail.com
GTALK/JABBER/PAYPAL:anthony.minessale at gmail.com
IRC: irc.freenode.net #freeswitch

FreeSWITCH Developer Conference
sip:888 at conference.freeswitch.org
googletalk:conf+888 at conference.freeswitch.org
pstn:+19193869900



More information about the FreeSWITCH-users mailing list