[Freeswitch-users] FS not detecting public IP address change

Mario G mario_fs at mgtech.com
Tue Oct 26 09:14:32 PDT 2010


What you said: "And nat_map status shows me which ports have been forwarded and the external ip address (which is sometimes wrong).  I also see this in the router gui." is also happening to me on a Linksys/Cisco RV042 router. Can't keep FS working for more than 2-5 hours without doing a restart or nat_map reinit. I think the routers upnp has a problem with dual wans, I have one static and one dynamic DSL.

On Oct 26, 2010, at 6:43 AM, Rupa Schomaker wrote:

> What do you have set for loglevel in switch.conf.xml?  My guess is that you have it set to something other than debug.  If that is set to (say) info, then info is as low as you can go.  Setting the console log level to debug will not give you debug output.
> 
> sofia is unaware of upnp so a keepalive packet should have no impact on it's operation.  I'm not familiar enough with sofia to tell what triggers that event.
> 
> On Tue, Oct 26, 2010 at 6:24 AM, Mark Campbell-Smith <mcampbellsmith at gmail.com> wrote:
> OK..  tcpdump gave me this and I still do not see anything on FS except for this line:
> 
> 2010-10-26 22:02:51.235608 [DEBUG] sofia.c:957 nua_i_outbound: unknown event 8: 102 NAT binding changed
> 
> Hypertext Transfer Protocol
>     NOTIFY * HTTP/1.1\r\n
>     HOST:239.255.255.250:1900\r\n
>     Cache-Control:max-age=120\r\n
>     Location:http://192.168.1.1:1278/rootDesc.xml\r\n
>     Server: Tomato UPnP/1.0 MiniUPnPd/1.4\r\n
>     NT:urn:schemas-upnp-org:service:WANIPConnection:1\r\n
>     USN:uuid:882dbe81-c28a-4992-baf7-410c05f1caf4::urn:schemas-upnp-org:service:WANIPConnection:1\r\n
>     NTS:ssdp:alive\r\n
>     \r\n
> 
> This looks the same as you posted before, so why do I get the unknown event 8 (is this related)?
> 
> Thanks!
> 
> On Tue, Oct 26, 2010 at 3:32 PM, Mark Campbell-Smith <mcampbellsmith at gmail.com> wrote:
> :)  that was the first thing I did, but I get nothing; no keep alive packets.
> 
> in the logfile at startup I see:
> 
> 2010-10-26 10:19:45.484258 [INFO] switch_nat.c:410 Scanning for NAT
> 2010-10-26 10:19:45.485991 [DEBUG] switch_nat.c:167 Checking for PMP 1/5
> 2010-10-26 10:19:45.488575 [INFO] switch_nat.c:423 NAT detected type: pmp, ExtIP: '203.xxx.xxx.xxx'
> 2010-10-26 10:19:45.490683 [DEBUG] switch_nat.c:256 NAT thread configured
> 2010-10-26 10:19:45.492180 [DEBUG] switch_nat.c:267 NAT thread started
> 
> And nat_map status shows me which ports have been forwarded and the external ip address (which is sometimes wrong).  I also see this in the router gui.  
> 
> But I never see the keep alive packets.
> 
> On Tue, Oct 26, 2010 at 3:13 PM, Rupa Schomaker <rupa at rupa.com> wrote:
> Just turn up console logging to level 7.
> 
> /log 7 if using fs_cli
> 
> 
> On Mon, Oct 25, 2010 at 6:53 PM, Mark Campbell-Smith <mcampbellsmith at gmail.com> wrote:
> Hi!
> 
> How do I enable debugging to get the UPnP keep alive packets?
> 
> Thanks!
> 
> On Tue, Oct 26, 2010 at 1:15 AM, Rupa Schomaker <rupa at rupa.com> wrote:
> I need the debug logging from the upnp stuff.  It should look something like:
> 
> +OK log level 7 [7]
> freeswitch at internal> 2010-10-25 09:13:59.926861 [DEBUG] switch_nat.c:299 got UPnP keep alive packet:
> NOTIFY * HTTP/1.1
> HOST:239.255.255.250:1900
> Cache-Control:max-age=60
> Location:http://192.168.1.1:5000/rootDesc.xml
> Server: Tomato UPnP/1.0 MiniUPnPd/1.4
> NT:urn:schemas-upnp-org:service:WANIPConnection:1
> USN:uuid:00000000-0000-0000-0000-000000000000::urn:schemas-upnp-org:service:WANIPConnection:1
> NTS:ssdp:alive
> 
> I also run tomato and haven't had trouble with the upnp support so at least we have that part working.
> 
> You should see the above keepalive appear periodically every 30s or so.  You should see another set of messages when you terminate the DSL connection and when that dsl connection comes back online.
> 
> On Sat, Oct 23, 2010 at 5:36 PM, Mark Campbell-Smith <mcampbellsmith at gmail.com> wrote:
> Hi!
> 
> The router is a ASUS router but it is running the tomato firmware which runs miniupnd.
> 
> In the debug I see the message: 2010-10-24 08:02:59.178918 [DEBUG] sofia.c:956 nua_i_outbound: unknown event 8: 101 NAT detected
> 
> This is what I see below. I hope I enabled all debug messages.  I thought I saw some xml type messages earlier, but not sure how I enabled them.
> 
> nta_outgoing: RTT is 67.958 ms
> outbound(0xb6e07c00): NAT binding changed: [210.xx.xxx.xx]:5080 != [58.xxx.xx.xx]:5080
> nua(0xb6e07c00): event i_outbound 102 NAT binding changed
> nua: nua_application_event: entering
> 2010-10-24 09:05:08.849525 [DEBUG] sofia.c:956 nua_i_outbound: unknown event 8: 102 NAT binding changed
> 
> 
> On Sun, Oct 24, 2010 at 1:08 AM, Rupa Schomaker <rupa at rupa.com> wrote:
> btw: what router are you using?
> 
> 
> On Sat, Oct 23, 2010 at 9:06 AM, Rupa Schomaker <rupa at rupa.com> wrote:
> In a upnp config, FS is depending on the router to notify it of the ip address change.  It is possible the upnp message(s) aren't formatted as expected.  If you turn on debug logging you'll get the upnp messages on the console.  If you can pastebin the capture of those while dropping and restarting the dsl connection I can maybe see if there is something obvious going on.  The debug should also have messages related to the processing of those upnp messages.
> 
> On Sat, Oct 23, 2010 at 7:04 AM, Mark Campbell-Smith <mcampbellsmith at gmail.com> wrote:
> HI!
> 
> I know this question must have been answered 100's of times....
> 
> My adsl is a bit dodgy at the moment and tends to go up and down; which means I get assigned a new ip address from my ISP.  FS is nat'd behind a upnp capable router.
> 
> The problem is that FS does not seem to be detecting the change.   For both the internal and external profile, I have auto-nat setup, and I have tried stun and host settings in vars.conf.  When I issue a nat_map status I see my old IP address, and if I then issue a nat_map reinit, I see the new public IP address.  How can I get this to be automatic?
> 
> Also the public IP address shown in the nat_map status is not the same as shown in the sofia profile internal/external printouts.  Why is this?
> 
> I'm sure this is configuration, just not sure what to change.
> 
> Thanks!
> 
> _______________________________________________
> FreeSWITCH-users mailing list
> FreeSWITCH-users at lists.freeswitch.org
> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
> http://www.freeswitch.org
> 
> 
> 
> 
> -- 
> -Rupa
> 
> 
> 
> -- 
> -Rupa
> 
> _______________________________________________
> FreeSWITCH-users mailing list
> FreeSWITCH-users at lists.freeswitch.org
> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
> http://www.freeswitch.org
> 
> 
> 
> _______________________________________________
> FreeSWITCH-users mailing list
> FreeSWITCH-users at lists.freeswitch.org
> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
> http://www.freeswitch.org
> 
> 
> 
> 
> -- 
> -Rupa
> 
> _______________________________________________
> FreeSWITCH-users mailing list
> FreeSWITCH-users at lists.freeswitch.org
> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
> http://www.freeswitch.org
> 
> 
> 
> _______________________________________________
> FreeSWITCH-users mailing list
> FreeSWITCH-users at lists.freeswitch.org
> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
> http://www.freeswitch.org
> 
> 
> 
> 
> -- 
> -Rupa
> 
> _______________________________________________
> FreeSWITCH-users mailing list
> FreeSWITCH-users at lists.freeswitch.org
> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
> http://www.freeswitch.org
> 
> 
> 
> 
> _______________________________________________
> FreeSWITCH-users mailing list
> FreeSWITCH-users at lists.freeswitch.org
> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
> http://www.freeswitch.org
> 
> 
> 
> 
> -- 
> -Rupa
> _______________________________________________
> FreeSWITCH-users mailing list
> FreeSWITCH-users at lists.freeswitch.org
> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
> http://www.freeswitch.org

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.freeswitch.org/pipermail/freeswitch-users/attachments/20101026/d3585865/attachment-0001.html 


More information about the FreeSWITCH-users mailing list