[Freeswitch-users] Installing OpenZap?

GillesToo codecomplete at free.fr
Fri May 28 04:41:03 PDT 2010



Troy Anderson-2 wrote:
> oz list will only work if openzap is loaded, so that's a clue that it
> isn't for some reason. Try issuing reload mod_openzap from the cli and
> take a look at the output.  There is likely an error on load, and that
> error may lead you to what's wrong with the config.

Thanks for the tip. Here's what "reload mod_openzap" returns:



> freeswitch at internal> load mod_openzap
> -ERR [module load file routine returned an error]
> 
> freeswitch at internal> 2010-05-28 12:13:51.138275 [DEBUG] zap_config.c:56
> Configuration file is /usr/local/freeswitch/conf/modules.conf.
> 2010-05-28 12:13:51.138275 [NOTICE] zap_io.c:3057 Modules configured: 1 
> 2010-05-28 12:13:51.139297 [DEBUG] zap_config.c:56 Configuration file is
> /usr/local/freeswitch/conf/openzap.conf.
> 2010-05-28 12:13:51.139297 [DEBUG] zap_io.c:2587 found config for span
> 2010-05-28 12:13:51.139297 [NOTICE] ozmod_zt.c:1185 Using DAHDI control
> device
> 2010-05-28 12:13:51.139297 [ERR] ozmod_zt.c:1194 Cannot open control
> device /dev/dahdi/ctl: Permission denied
> 2010-05-28 12:13:51.140310 [ERR] zap_io.c:2856 Error loading
> /usr/local/freeswitch/mod/ozmod_zt.so
> 2010-05-28 12:13:51.140310 [ERR] zap_io.c:2901 Unloading
> /usr/local/freeswitch/mod/ozmod_zt.so
> 2010-05-28 12:13:51.140310 [CRIT] zap_io.c:2610 failure creating span, no
> such type 'zt'
> 2010-05-28 12:13:51.140310 [INFO] zap_io.c:2782 Configured 0 channel(s)
> 2010-05-28 12:13:51.140310 [ERR] zap_io.c:3065 No modules configured!
> 2010-05-28 12:13:51.140310 [ERR] mod_openzap.c:3331 Error loading OpenZAP
> 2010-05-28 12:13:51.140310 [CRIT] switch_loadable_module.c:882 Error
> Loading module /usr/local/freeswitch/mod/mod_openzap.so
> **Module load routine returned an error**
> 

BTW, before I investigate further... I notice that the two articles in the
wiki about OpenZap are based on Zaptel (1.4), whose development stopped two
years ago when Zaptel was replaces with Dadhi:

http://wiki.freeswitch.org/wiki/OpenZAP
http://wiki.freeswitch.org/wiki/Zaptel_Tutorial

Has someone successfully used OpenZap with Dahdi, and if yes, are there any
changes that should be made in OpenZap to accomodate this change?

Thank you.
-- 
View this message in context: http://freeswitch-users.2379917.n2.nabble.com/Installing-OpenZap-tp5111050p5112708.html
Sent from the freeswitch-users mailing list archive at Nabble.com.



More information about the FreeSWITCH-users mailing list