[Freeswitch-users] smg_prid not bridging the call

lakshmanan ganapathy lakindia89 at gmail.com
Fri Feb 26 20:57:07 PST 2010


Dear Moy,
Here are the details:

FreeSwitch Log:
http://pastebin.freeswitch.org/12256

 /var/log/sangoma_pri/dchan_<span-no>.log:
 http://pastebin.freeswitch.org/12257

/var/log/sangoma_mgd.log:
http://pastebin.freeswitch.org/12258

smg_pri.conf
http://pastebin.freeswitch.org/12259


On Fri, Feb 26, 2010 at 9:01 PM, Moises Silva <moises.silva at gmail.com>wrote:

> Hello lakshmanan,
>
> Please enable the dchan_log=q931 in /etc/wanpipe/smg_pri.conf and then
> restart it (smg_ctrl restart), then pastebin the logs
>
>  /var/log/sangoma_pri/dchan_<span-no>.log
> /var/log/sangoma_mgd.log
>
> That will contain the Q931 details (if any). Also pastebin your
> smg_pri.conf.
>
> Also enable the FreeSWITCH debug logging (see the FreeSWITCH wiki for
> details about that) and paste them too.
>
> --
> Moises Silva
> Senior Software Engineer
> Sangoma Technologies Inc. | 50 McIntosh Drive, Suite 120, Markham ON L3R
> 9T3 Canada
> t. 1 905 474 1990 x 128 | e. moy at sangoma.com
>
> On Fri, Feb 26, 2010 at 12:55 AM, lakshmanan ganapathy <
> lakindia89 at gmail.com> wrote:
>
>> Dear all,
>> I'm having a A102 Sangoma hardware. I configured it with freeswitch.
>> wanrouter status, says both the port as connected.
>> My smg_prid version is
>>
>> Feb 26 16:08:14 FMS-FreeSwitch sangoma_prid: ================System
>> restart=============
>> Feb 26 16:08:14 FMS-FreeSwitch sangoma_prid: = Sangoma PRI Protocol Stack
>> Daemon       =
>> Feb 26 16:08:14 FMS-FreeSwitch sangoma_prid: = Version:
>> 1.54                           =
>> Feb 26 16:08:14 FMS-FreeSwitch sangoma_prid: = Date: Feb 15
>> 2010                       =
>> Feb 26 16:08:14 FMS-FreeSwitch sangoma_prid: = Wanpipe Release:
>> wanpipe-3.5.8.6       =
>> Feb 26 16:08:14 FMS-FreeSwitch sangoma_prid: = Revision:Revision:
>> 15288                =
>> Feb 26 16:08:14 FMS-FreeSwitch sangoma_prid:
>> ===========================================
>>
>> My freeswitch version is 16729.
>> I started freeswitch.
>>
>> oz list
>> +OK
>> span: 1 (smg_prid)
>> type: Sangoma (boost)
>> chan_count: 60
>> dialplan: XML
>> context: default
>> dial_regex:
>> fail_dial_regex:
>> hold_music:
>> analog_options none
>>
>> I originated a call as
>> originate openzap/smg_prid/a/9952248266 &park(), which hits my mobile.
>>
>> But when I issued the following command:
>> originate openzap/smg_prid/a/9952248266
>> &bridge(openzap/smg_prid/a/8122133885)
>> It rings my mobile (9952248266) first, but after that the following error
>> was displayed
>>
>> 2010-02-26 16:20:51.736080 [ERR] switch_ivr_originate.c:2387 Cannot create
>> outgoing channel of type [openzap] cause: [NORMAL_CIRCUIT_CONGESTION]
>> The call got ended in my mobile.
>>
>> Freeswitch log and smg_pri.conf
>>           http://pastebin.freeswitch.org/12248
>> openzap.conf:
>> [span wanpipe smg_prid]
>> name => smg_prid
>> trunk_type =>e1
>> b-channel => 1:1-15
>> b-channel => 1:17-31
>> trunk_type =>e1
>> b-channel => 2:1-15
>> b-channel => 2:17-31
>>
>> openzap.conf.xml:
>> <configuration name="openzap.conf" description="OpenZAP Configuration">
>>   <settings>
>>     <param name="debug" value="0"/>
>>   </settings>
>>   <boost_spans>
>>         <span id="smg_prid">
>>         <param name="dialplan" value="XML"/>
>>         <param name="context" value="default"/>
>>         </span>
>>   </boost_spans>
>> </configuration>
>>
>> Please guide me to setup this one!!.
>>
>>
>> _______________________________________________
>> FreeSWITCH-users mailing list
>> FreeSWITCH-users at lists.freeswitch.org
>> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
>> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
>> http://www.freeswitch.org
>>
>>
>
> _______________________________________________
> FreeSWITCH-users mailing list
> FreeSWITCH-users at lists.freeswitch.org
> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
> http://www.freeswitch.org
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.freeswitch.org/pipermail/freeswitch-users/attachments/20100227/9b76b747/attachment-0002.html 


More information about the FreeSWITCH-users mailing list