[Freeswitch-users] Forcing endpoint registration

[Brian West]

 From FreeSWITCH you can't force and endpoint to register... thats the  
endpoints job... what you're doing is just flushing the reg out of  
FreeSWITCH so now it can't find the endpoint...  Try adding a reboot  
on there maybe i'll reboot the device and cause it to register again...

/b

On Oct 27, 2009, at 12:33 PM, Lars Zeb wrote:

> Is the following the correct command to force registration of an  
> endpoint below which is not showing up in ‘sofia status profile  
> internal’ currently, but when it does it looks like the following?
>
> Call-ID:        mjkg8c3zlqwjzfd.hrt5
> User:           1019 at 192.168.10.29
> Contact:        "user" <sip:1019 at 192.168.10.103;line=3852>
> Agent:          snom-m3-SIP/02.02 (MAC=0004132A31C7; HW=1)
> Status:         Registered(UDP)(unknown) EXP(2009-10-27 10:46:07)
> Host:           fs
> IP:             192.168.10.103
> Port:           5060
> Auth-User:      1019
> Auth-Realm:     192.168.10.29
> MWI-Account:    1019 at 192.168.10.29
>
> sofia profile internal  flush_inbound_reg 1019 at 192.168.10.29
>
> Thanks Lars

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.freeswitch.org/pipermail/freeswitch-users/attachments/20091027/58a91894/attachment-0002.html