[Freeswitch-users] portaudio error

[Frank Carmickle]

Hello

Debian lenny with svn15321

freeswitch at internal> load mod_portaudio
-ERR [module load file routine returned an error]

2009-11-03 11:56:47.047969 [ERR] mod_portaudio.c:964 Cannot find an input devicefreeswitch at internal> 2009-11-03 11:56:47.047969 [ERR] mod_portaudio.c:974 Cannot find an input device
2009-11-03 11:56:47.047969 [CRIT] switch_loadable_module.c:871 Error Loading module /opt/freeswitch/mod/mod_portaudio.so
**Module load routine returned an error**

<configuration name="portaudio.conf" description="Soundcard Endpoint">
  <settings>
    <!-- indev, outdev, ringdev:
         partial case sensitive string match on something in the name
         or the device number prefixed with # eg "#1" (or blank for default) -->
    <!-- device to use for input -->
    <param name="indev" value="1"/>
    <!-- device to use for output -->
    <param name="outdev" value="1"/>

    <!--device to use for inbound ring -->
    <param name="ringdev" value="1"/>
    <!--File to play as the ring sound -->
    <!--<param name="ring-file" value="/sounds/ring.wav"/>-->
    <!--Number of seconds to pause between rings -->
    <!--<param name="ring-interval" value="5"/>-->
    <!--Enable or Disable dual_streams-->
    <!--<param name="dual-streams" value="true"/>-->

    <!--file to play when calls are on hold-->
    <param name="hold-file" value="$${hold_music}"/>
    <!--Timer to use for hold music (i'd leave this one commented)-->
    <!--<param name="timer-name" value="soft"/>-->

    <!--Default dialplan and caller-id info -->
    <param name="dialplan" value="XML"/>
    <param name="cid-name" value="$${outbound_caller_name}"/>
    <param name="cid-num" value="$${outbound_caller_id}"/>

    <!--audio sample rate and interval -->
    <param name="sample-rate" value="48000"/>
    <param name="codec-ms" value="10"/>
  </settings>
</configuration>
 
Any help would be appreciated.

--FC