[Freeswitch-users] Gateway Outbound Dial Config Problem

[Michael Collins]

What does your dialplan entry look like? Also, a debug trace and even a sip
trace would be useful. You can use pastepin.freeswitch.org to paste a lot of
stuff in a place where everyone can view it and not overwhelm the email
list.

-MC

On Fri, May 8, 2009 at 12:36 PM, Dale <fdhege at gmail.com> wrote:

>
> Hello,
>
> I am trying to get a new freeswitch installation working and I have it
> registering to a sip provider just fine and can receive inbound calls
> but when I try and place a call out through the gateway the switch is
> rejecting it due to the domain in the to of the INVITE.
>
> Here is the INVITE
>
> 15:15:19.467351 IP (tos 0x0, ttl  64, id 40045, offset 0, flags
> [none], proto: UDP (17), length: 1398) 207.4.223.35.5080 >
> 207.16.137.36.sip: SIP, length: 1370
>        INVITE sip:16173800299 at 207.16.137.36<sip%3A16173800299 at 207.16.137.36>SIP/2.0
>        Via: SIP/2.0/UDP 207.4.223.35:5080
> ;rport;branch=z9hG4bKcc3a14Zcg8NZp
>        Max-Forwards: 69
>        From: "FreeSWITCH" <sip:
> 6172384723 at 172.16.12.100;transport=udp>;tag=54FXray2SNaKN
>        To: <sip:18023800299 at 207.16.137.36<sip%3A18023800299 at 207.16.137.36>
> >
>        Call-ID: 6956c6eb-b6a7-122c-5fb1-725bd701687a
>        CSeq: 114786724 INVITE
>
> Here is the REGISTER for the same gateway
>
> 15:24:27.746984 IP (tos 0x0, ttl  64, id 40075, offset 0, flags
> [none], proto: UDP (17), length: 661) 207.4.223.35.5080 >
> 207.16.137.36.sip: SIP, length: 633
>        REGISTER sip:207.16.137.36;transport=udp SIP/2.0
>        Via: SIP/2.0/UDP 207.4.223.35:5080
> ;rport;branch=z9hG4bK9H0SmN8jvavXp
>        Max-Forwards: 70
>        From: <sip: 6172384723 at 172.16.12.100
> ;transport=udp>;tag=3jXBNmvUZ3XDe
>        To: <sip: 6172384723 at 172.16.12.100;transport=udp>
>
> Here is my gateway config
>
> <gateway name="voip1">
>           <param name="username" value="6172384723" />
>           <param name="password" value="testme" />
>           <param name="realm" value="172.16.12.100" />
>           <param name="proxy" value="207.16.137.36"/>
>           <param name="register-proxy" value="207.16.137.36"/>
>           <param name="register" value="true" />
>           <param name="stun-enabled" value="false"/>
>           <param name="from-domain" value="172.16.12.100"/>
>           <param name="aggressive-nat-detection" value="false"/>
>     </gateway>
>
> Here is the bridge from the dialplan
>
>     <action application="bridge" data="sofia/gateway/voip1/1$1"/>
>
> I'm currently running FreeSWITCH Version 1.0.trunk (13226M).
>
> I hunted around trying to find another option in for the gateway
> config that would set the to domain to the realm and still send the
> packet to proxy but could not find one.
>
> Any help/hints are welcome.
>
> Thanks,
>
> -Dale
>
> _______________________________________________
> Freeswitch-users mailing list
> Freeswitch-users at lists.freeswitch.org
> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
> http://www.freeswitch.org
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.freeswitch.org/pipermail/freeswitch-users/attachments/20090508/79ab4260/attachment-0002.html