[Freeswitch-users] Sangoma a101

Peter P GMX Prometheus001 at gmx.net
Fri Jul 31 06:31:08 PDT 2009


>I was asked by telco to specifically use telco, will using Q931 cause
>any issues for me?

Sorry, I do not not understand that question.

Best regards
Peter

Niall Crosby schrieb:
> Thanks for help.
>
> Got my alarms sorted - telco had problem there.
>
> As for my Freeswitch problem, chaning to Q931 clears the error message.
>
> I was asked by telco to specifically use telco, will using Q931 cause
> any issues for me?
>
> Thanks again,
> Niall.
>
> 2009/7/31 Peter P GMX <Prometheus001 at gmx.net>:
>   
>> Firstly I would try get get rid of the sangoma errors. There are 2 errors:
>>
>> Short Circuit:  ON
>> Loss of Signal: ON
>>
>> So either the card is not configured correctly or there is a cabling
>> problem. What is your wanpipe1.conf?
>>
>> Second, if euro doesn't work, try Q931.
>> I had success with that some time ago.
>>
>> Best regards
>> Peter
>>
>> Niall Crosby schrieb:
>>     
>>> Hi,
>>>
>>> This might be Sangoma config issue, so apologies in advance for
>>> posting it here if it is. I am waiting for Sangoma helpdesk to get
>>> back to me!
>>>
>>> But I have a Sangoma a101 and trying to get it working with
>>> Freeswitch. Have E1 line coming from telco and everything set up
>>> correctly (to my best efforts), however when Freeswitch starts, it
>>> says:
>>>
>>> 2009-07-30 15:17:15.446569 [ERR] mod_openzap.c:1953 Error starting
>>> OpenZAP span 1 mode: user dialect: euro error:
>>>
>>> Also I'm getting the following Sangoma alarms:
>>>
>>> ***** w1g1: E1 Alarms (Framer) *****
>>>
>>> ALOS:   OFF     | LOS:  ON
>>> RED:    ON      | AIS:  OFF
>>> OOF:    ON      | RAI:  OFF
>>>
>>> ***** w1g1: E1 Alarms (LIU) *****
>>>
>>> Short Circuit:  ON
>>> Open Circuit:   OFF
>>> Loss of Signal: ON
>>>
>>>
>>> Can someone tell me where I should be focusing my attention - on the
>>> Sangoma config or the Freeswitch config?
>>>
>>> Also what state should the Sangoma alarms be in when Freeswitch is NOT
>>> running? Should they all clear?
>>>
>>> Thanks in advance,
>>> Niall.
>>>
>>>
>>>
>>>       
>> _______________________________________________
>> FreeSWITCH-users mailing list
>> FreeSWITCH-users at lists.freeswitch.org
>> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
>> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
>> http://www.freeswitch.org
>>
>>     
>
>
>
>   




More information about the FreeSWITCH-users mailing list