[Freeswitch-users] zapata.conf immediate=yes in Asterisk - Freeswitch equivalent?

Scott Ellis scott.ellis at novatex.com.au
Thu Jan 15 02:17:28 PST 2009


After poking around in the code, it looks like if I set <param 
name="enable-callerid" value="false"/> in openzap.conf.xml, it should 
skip the GET_CALLERID state, and I should get the call answered straight 
away.

mod_openzap.c

} else if (!strcasecmp(var, "enable-callerid")) {
                    enable_callerid = val;


if (zap_configure_span("analog", span, on_analog_signal,
                                   "tonemap", tonegroup,
                                   "digit_timeout", &to,
                                   "max_dialstr", &max,
                                   "hotline", hotline,
                                   "enable_callerid", enable_callerid,
                                   TAG_END) != ZAP_SUCCESS) {
                zap_log(ZAP_LOG_ERROR, "Error starting OpenZAP span 
%d\n", span_id);
                continue;
            }

ozmod_analog.c

            else if (!strcasecmp(var, "enable_callerid")) {
            if (!(val = va_arg(ap, char *))) {
                break;
            }        
            if (zap_true(val)) {
                flags |= ZAP_ANALOG_CALLERID;
            } else {
                flags &= ~ZAP_ANALOG_CALLERID;
            }

and

case ZAP_OOB_RING_START:
        {
            if (event->channel->type != ZAP_CHAN_TYPE_FXO) {
                zap_log(ZAP_LOG_ERROR, "Cannot get a RING_START event on 
a non-fxo channel, please check your config.\n");
                zap_set_state_locked(event->channel, 
ZAP_CHANNEL_STATE_DOWN);
                goto end;
            }
            if (!event->channel->ring_count && (event->channel->state == 
ZAP_CHANNEL_STATE_DOWN && !zap_test_flag(event->channel, 
ZAP_CHANNEL_INTHREAD))) {
                if (zap_test_flag(analog_data, ZAP_ANALOG_CALLERID)) {
                    zap_set_state_locked(event->channel, 
ZAP_CHANNEL_STATE_GET_CALLERID);
                } else {
                    zap_set_state_locked(event->channel, 
ZAP_CHANNEL_STATE_IDLE);
                }
                event->channel->ring_count = 1;
                zap_mutex_unlock(event->channel->mutex);
                locked = 0;
                zap_thread_create_detached(zap_analog_channel_run, 
event->channel);
            } else {
                event->channel->ring_count++;
            }
        }
        break;

2009-01-15 20:19:44 [DEBUG] ozmod_analog.c:744 process_event() EVENT 
[RING_START][1:1] STATE [DOWN]
2009-01-15 20:19:44 [DEBUG] ozmod_analog.c:760 process_event() Changing 
state on 1:1 from DOWN to GET_CALLERID
2009-01-15 20:19:44 [DEBUG] ozmod_analog.c:239 zap_analog_channel_run() 
ANALOG CHANNEL thread starting.
2009-01-15 20:19:44 [DEBUG] ozmod_analog.c:410 zap_analog_channel_run() 
Executing state handler on 1:1 for GET_CALLERID
2009-01-15 20:19:44 [DEBUG] ozmod_analog.c:744 process_event() EVENT 
[RING_START][1:1] STATE [GET_CALLERID]
2009-01-15 20:19:44 [DEBUG] ozmod_analog.c:744 process_event() EVENT 
[RING_START][1:1] STATE [GET_CALLERID]
2009-01-15 20:19:45 [DEBUG] ozmod_analog.c:744 process_event() EVENT 
[RING_START][1:1] STATE [GET_CALLERID]
2009-01-15 20:19:47 [DEBUG] ozmod_analog.c:744 process_event() EVENT 
[RING_START][1:1] STATE [GET_CALLERID]
2009-01-15 20:19:47 [DEBUG] ozmod_analog.c:744 process_event() EVENT 
[RING_START][1:1] STATE [GET_CALLERID]
2009-01-15 20:19:47 [DEBUG] ozmod_analog.c:744 process_event() EVENT 
[RING_START][1:1] STATE [GET_CALLERID]
2009-01-15 20:19:48 [DEBUG] ozmod_analog.c:744 process_event() EVENT 
[RING_START][1:1] STATE [GET_CALLERID]
2009-01-15 20:19:49 [DEBUG] ozmod_analog.c:292 zap_analog_channel_run() 
Changing state on 1:1 from GET_CALLERID to IDLE
2009-01-15 20:19:49 [DEBUG] ozmod_analog.c:410 zap_analog_channel_run() 
Executing state handler on 1:1 for IDLE
2009-01-15 20:19:49 [DEBUG] mod_openzap.c:1165 on_fxo_signal() got FXO 
sig 1:1 [START]

The code all looks right, but I am not getting what I think should 
happen. Anyone with any ideas?

Scott

Scott Ellis wrote:
> Searched the wiki and mailing lists as best I can, but with no luck.
>
> How do I get OpenZap to answer a call immediately? (I do not need caller id)
>
> Scott
>
>
>
> _______________________________________________
> Freeswitch-users mailing list
> Freeswitch-users at lists.freeswitch.org
> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
> http://www.freeswitch.org
>
>   





More information about the FreeSWITCH-users mailing list