[Freeswitch-users] No caller/called ID received (Wildcard X101P)

Tomás tomasborrella at gmail.com
Wed Jan 14 06:38:35 PST 2009


Hi,

Anthony, I think that's my problem, when I receive a call from the PSTN, FS
receive number 1 instead of my house number and I don't know why.

Michael, I live in Spain, Is it not "es" the tonegroup I should use?

Thank you very much.

On Wed, Jan 14, 2009 at 3:18 PM, Michael Jerris <mike at jerris.com> wrote:

> I noticed tonegroup=es.  What country are you in and do you know what
> method they use to do dtmf.  Most likely we need a small tweak to set the
> dtmf method for your country.
> Mike
>
> On Jan 14, 2009, at 9:05 AM, Anthony Minessale wrote:
>
>
> number => 1
>
> This value should be set to the DID of the FXO line.
> That way when a call hits FS it will go to that extension in the dialplan.
> This is unrelated to callerid, it's the destination not the source.
>
> If the line has caller-id it will also be available when it's collected
> after the 2nd ring.
>
>
>
> On Wed, Jan 14, 2009 at 5:54 AM, Tomás <tomasborrella at gmail.com> wrote:
>
>> Hi all,
>>
>> I'm a new FreeSwitch user and this is my first email to the list.
>>
>> I'm trying to configure my Home PBX with a Wildcard X101P (configured as
>> FXO) and I have a problem receiving the caller/called ID from PSTN.
>>
>> This is the content of file "openzap.conf":
>>
>> [span zt]
>> name => OpenZAP
>> number => 1
>> fxo-channel => 1
>>
>> And this is the content of file "openzap.conf.xml":
>>
>> <configuration name="openzap.conf" description="OpenZAP Configuration">
>>   <settings>
>>     <param name="debug" value="0"/>
>>   </settings>
>>   <analog_spans>
>>     <span id="1">
>>       <param name="tonegroup" value="es"/>
>>       <param name="digit-timeout" value="2000"/>
>>       <param name="max-digits" value="11"/>
>>       <param name="dialplan" value="XML"/>
>>       <param name="context" value="default"/>
>>       <param name="enable-callerid" value="true"/>
>>     </span>
>>   </analog_spans>
>> </configuration>
>>
>> As you can see the param "enable-callerid" is set to "true", but when I
>> received and incoming call, FreeSwitch doesn't get neither the caller number
>> nor the called number (instead of my home number, I receive a number 1, as
>> can be seen on the following log of an incoming call):
>>
>> 2009-01-14 20:43:12 [NOTICE] switch_channel.c:565
>> switch_channel_set_name() New Channel OpenZAP/1:1/1
>> [941d6234-e273-11dd-bcdf-89190a30fe61]
>> 2009-01-14 20:43:12 [INFO] mod_dialplan_xml.c:233 dialplan_hunt()
>> Processing OpenZAP->1  in context default
>> 2009-01-14 20:43:12 [NOTICE] switch_ivr.c:1255
>> switch_ivr_session_transfer() Transfer OpenZAP/1:1/1  to enum[1 at default]
>> 2009-01-14 20:43:16 [INFO] switch_core_state_machine.c:122
>> switch_core_standard_on_routing() No Route, Aborting
>> 2009-01-14 20:43:16 [NOTICE] switch_core_state_machine.c:123
>> switch_core_standard_on_routing() Hangup OpenZAP/1:1/1  [CS_ROUTING]
>> [NO_ROUTE_DESTINATION]
>> 2009-01-14 20:43:16 [NOTICE] switch_core_session.c:960
>> switch_core_session_thread() Session 1 (OpenZAP/1:1/1 ) Ended
>> 2009-01-14 20:43:16 [NOTICE] switch_core_session.c:962
>> switch_core_session_thread() Close Channel OpenZAP/1:1/1  [CS_HANGUP]
>> 2009-01-14 20:43:23 [NOTICE] switch_channel.c:565
>> switch_channel_set_name() New Channel OpenZAP/1:1/1
>> [9af53280-e273-11dd-bcdf-89190a30fe61]
>>
>>
> _______________________________________________
> Freeswitch-users mailing list
> Freeswitch-users at lists.freeswitch.org
> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
> http://www.freeswitch.org
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.freeswitch.org/pipermail/freeswitch-users/attachments/20090114/1c12276b/attachment-0002.html 


More information about the FreeSWITCH-users mailing list