[Freeswitch-users] PSTN-to-Internal Call Does Not Get Routed toVoice Mail

[Michael Jerris]

try these drivers:

ftp://ftp.sangoma.com/linux/custom/DavidYS/wanpipe-3.5.8.7.smg_pri.4.tgz

Mike

On Dec 29, 2009, at 6:17 PM, Jerry Richards wrote:

> I upgraded to wanpipe-3.5.8.7.tgz and Freeswitch version 1.0.5pre9 and the bug is still present.  Would libpri possibly help?  I'm currently using the native wanpipe PRI stack and default openzap configs in Freeswitch.
>  
> Best Regards,
> Jerry
>  
> 
> From: Anthony Minessale [mailto:anthony.minessale at gmail.com] 
> Sent: Monday, December 28, 2009 3:31 PM
> To: freeswitch-users at lists.freeswitch.org
> Subject: Re: [Freeswitch-users] PSTN-to-Internal Call Does Not Get Routed toVoice Mail
> 
> you have to update the sangoma driver and probably FreeSWITCH for good measure.
> Its a known bug in the sangoma driver that has been fixed it the latest release.
> 
> 
> 
> On Mon, Dec 28, 2009 at 5:19 PM, Jerry Richards <jerry.richards at teotech.com> wrote:
> Hello All,
> 
> I posted a FS log into the Pastebin at http://pastebin.freeswitch.org/11644.
> 
> I am still having the problem where a PSTN-to-Internal call via a Sangoma
> A101D card stops ringing the internal phone after about 10 seconds.  It
> should be ringing for 30 seconds and then go to Voice Mail (as an
> Internal-to-Internal call does).
> 
> Best Regards,
> Jerry
> 
> 
> -----Original Message-----
> From: Jerry Richards [mailto:jerry.richards at teotech.com]
> Sent: Tuesday, December 22, 2009 8:02 AM
> To: 'freeswitch-users at lists.freeswitch.org'
> Subject: PSTN-to-Internal Call Does Not Get Routed to Voice Mail
> 
> 
> I have a Freeswitch PBX server with an installed Sangoma A101D card
> connected to a PRI.  Most everything works okay, however when I get an
> inbound call from the PSTN, if the call is not answered within about 12
> seconds, the call ends (so it doesn't go to voice mail).  If I make a call
> from one internal phone to another, then it will go to voice mail after 30
> seconds.  How can I get the external call to route to voice mail after 30
> seconds?
> 
> I put a new 11595 log into the pastebin.  Do you know any Freeswitch setting
> that might cause this?
> 
> If this issue has been addressed before, what string should I use to search
> for it, because I can't find it.
> 
> Thanks,
> Jerry
> 
> 
> _______________________________________________
> FreeSWITCH-users mailing list
> FreeSWITCH-users at lists.freeswitch.org
> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
> http://www.freeswitch.org
> 
> 
> 
> -- 
> Anthony Minessale II
> 
> FreeSWITCH http://www.freeswitch.org/
> ClueCon http://www.cluecon.com/
> Twitter: http://twitter.com/FreeSWITCH_wire
> 
> AIM: anthm
> MSN:anthony_minessale at hotmail.com
> GTALK/JABBER/PAYPAL:anthony.minessale at gmail.com
> IRC: irc.freenode.net #freeswitch
> 
> FreeSWITCH Developer Conference
> sip:888 at conference.freeswitch.org
> iax:guest at conference.freeswitch.org/888
> googletalk:conf+888 at conference.freeswitch.org
> pstn:+19193869900
> _______________________________________________
> FreeSWITCH-users mailing list
> FreeSWITCH-users at lists.freeswitch.org
> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
> http://www.freeswitch.org

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.freeswitch.org/pipermail/freeswitch-users/attachments/20091229/3ac0c607/attachment-0002.html