[Freeswitch-users] OpenZap issues with incoming and outgoing calls

Jingwei Yang jingwei.yang at gmail.com
Thu Dec 3 01:29:08 PST 2009 

Hello All,

I have a Digium TDM400P pci card with two FXO ports installed on my linux
box. I've connected an external telephone line to the first FXO port. But I
can't either make outgoing calls or receive incoming ones. Here are my
setups, please let me know where goes wrong.
*
/etc/zaptel.conf*

loadzone = sg
defaultzone=sg
fxsks=1,2

*/usr/local/freeswitch/conf/zt.conf* remains unchanged

[defaults]
codec_ms => 20
wink_ms => 150
flash_ms => 750
echo_cancel_level => 64
rxgain => 0.0
txgain => 0.0

*/usr/local/freeswitch/conf/openzap.conf*

[span zt]
name => OpenZAP
number => 1
fxo-channel => 1

[span zt]
name => OpenZAP
number => 2
fxo-channel => 2

*/usr/local/freeswitch/conf/autoload_configs/openzap.conf.xml*

<configuration name="openzap.conf" description="OpenZAP Configuration">
  <settings>
    <param name="debug" value="0"/>
  </settings>
  <!-- one entry here per openzap span -->
  <analog_spans>
    <span id="1">
      <param name="tonegroup" value="sg"/>
      <param name="digit-timeout" value="2000"/>
      <param name="max-digits" value="11"/>
      <param name="dialplan" value="XML"/>
      <param name="context" value="default"/>
    </span>
    <span id="2">
      <param name="tonegroup" value="sg"/>
      <param name="digit-timeout" value="2000"/>
      <param name="max-digits" value="1"/>
      <param name="dialplan" value="XML"/>
      <param name="context" value="default"/>
    </span>
  </analog_spans>
</configuration>

I defined an extension in dialplan/default.xml to receive bridge incoming
calls to my skype instance. Frankly speaking, I'm not sure whether this
definition is correct. How should I define the expression? When I dial the
telephone number, the FS console has no response and I hear nother but busy
tones.

    <extension name="incoming_fxo">
      <condition field="destination_number" expression="^(1)$">
        <action application="bridge" data="skypiax/ANY/my_skype_account"/>
      </condition>
    </extension>

For outgoing calls, I tried something like this: originate
openzap/1/1/xxxxxxxx &echo, while "xxxxxxxx" is my handphone number. Again,
my handphone has no response. Hopefully I've explained my situation clearly.
Please kindly enlighten where the problem might be.

Thanks,
-Jingwei

p.s. here is the outgoing log trace for your reference.


freeswitch at localhost.localdomain> originate openzap/1/1/xxxxxxxx &echo
2009-12-03 17:21:04.664276 [INFO] ozmod_zt.c:636 Setting echo cancel to 64
taps for 1:1
2009-12-03 17:21:04.664276 [DEBUG] mod_openzap.c:366 Set codec PCMU 20ms
2009-12-03 17:21:04.665278 [DEBUG] mod_openzap.c:1191 Connect outbound
channel OpenZAP/1:1/xxxxxxxx
2009-12-03 17:21:04.665278 [NOTICE] switch_channel.c:613 New Channel
OpenZAP/1:1/xxxxxxxx [6f843194-18ce-4525-862f-f5f4e96db5eb]
2009-12-03 17:21:04.665278 [DEBUG] mod_openzap.c:1203 (OpenZAP/1:1/xxxxxxxx)
State Change CS_NEW -> CS_INIT
2009-12-03 17:21:04.665278 [DEBUG] switch_core_session.c:999 Send signal
OpenZAP/1:1/xxxxxxxx [BREAK]
2009-12-03 17:21:04.665278 [DEBUG] ozmod_analog.c:59 Changing state on 1:1
from DOWN to DIALING
2009-12-03 17:21:04.665278 [DEBUG] ozmod_analog.c:279 ANALOG CHANNEL thread
starting.
2009-12-03 17:21:04.665278 [INFO] ozmod_zt.c:636 Setting echo cancel to 64
taps for 1:1
2009-12-03 17:21:04.665278 [DEBUG] ozmod_analog.c:450 Executing state
handler on 1:1 for DIALING
2009-12-03 17:21:04.665278 [DEBUG] switch_core_state_machine.c:314
(OpenZAP/1:1/xxxxxxxx) Running State Change CS_INIT
2009-12-03 17:21:04.665278 [DEBUG] switch_core_state_machine.c:338
(OpenZAP/1:1/xxxxxxxx) State INIT
2009-12-03 17:21:04.665278 [DEBUG] mod_openzap.c:390 (OpenZAP/1:1/xxxxxxxx)
State Change CS_INIT -> CS_ROUTING
2009-12-03 17:21:04.665278 [DEBUG] switch_core_session.c:999 Send signal
OpenZAP/1:1/xxxxxxxx [BREAK]
2009-12-03 17:21:04.665278 [DEBUG] switch_core_state_machine.c:338
(OpenZAP/1:1/xxxxxxxx) State INIT going to sleep
2009-12-03 17:21:04.665278 [DEBUG] switch_core_state_machine.c:314
(OpenZAP/1:1/xxxxxxxx) Running State Change CS_ROUTING
2009-12-03 17:21:04.665278 [DEBUG] switch_core_state_machine.c:341
(OpenZAP/1:1/xxxxxxxx) State ROUTING
2009-12-03 17:21:04.665278 [DEBUG] mod_openzap.c:413 OpenZAP/1:1/xxxxxxxx
CHANNEL ROUTING
2009-12-03 17:21:04.665278 [DEBUG] switch_ivr_originate.c:66
(OpenZAP/1:1/xxxxxxxx) State Change CS_ROUTING -> CS_CONSUME_MEDIA
2009-12-03 17:21:04.665278 [DEBUG] switch_core_session.c:999 Send signal
OpenZAP/1:1/xxxxxxxx [BREAK]
2009-12-03 17:21:04.665278 [DEBUG] switch_core_state_machine.c:341
(OpenZAP/1:1/xxxxxxxx) State ROUTING going to sleep
2009-12-03 17:21:04.665278 [DEBUG] switch_core_state_machine.c:314
(OpenZAP/1:1/xxxxxxxx) Running State Change CS_CONSUME_MEDIA
2009-12-03 17:21:04.665278 [DEBUG] switch_core_state_machine.c:360
(OpenZAP/1:1/xxxxxxxx) State CONSUME_MEDIA
2009-12-03 17:21:04.665278 [DEBUG] switch_core_state_machine.c:360
(OpenZAP/1:1/xxxxxxxx) State CONSUME_MEDIA going to sleep
2009-12-03 17:21:34.114940 [DEBUG] skypiax_protocol.c:141 rev
15765M[(nil)|37     ][DEBUG_SKYPE  141  ][skypiax8  ][-1, 0, 0] READING:
|||USER amanda8884 PHONE_HOME |||
2009-12-03 17:21:34.114940 [DEBUG] skypiax_protocol.c:141 rev
15765M[(nil)|37     ][DEBUG_SKYPE  141  ][skypiax8  ][-1, 0, 0] READING:
|||USER amanda8884 PHONE_OFFICE |||
2009-12-03 17:21:34.114940 [DEBUG] skypiax_protocol.c:141 rev
15765M[(nil)|37     ][DEBUG_SKYPE  141  ][skypiax8  ][-1, 0, 0] READING:
|||USER amanda8884 PHONE_MOBILE |||
2009-12-03 17:21:34.684709 [DEBUG] ozmod_analog.c:340 Changing state on 1:1
from DIALING to BUSY
2009-12-03 17:21:34.704705 [DEBUG] ozmod_analog.c:450 Executing state
handler on 1:1 for BUSY
2009-12-03 17:21:34.704705 [DEBUG] ozmod_analog.c:579 Changing state on 1:1
from BUSY to DOWN
2009-12-03 17:21:34.724706 [DEBUG] ozmod_analog.c:450 Executing state
handler on 1:1 for DOWN
2009-12-03 17:21:34.724706 [DEBUG] mod_openzap.c:1334 got FXO sig 1:1 [STOP]
2009-12-03 17:21:34.724706 [NOTICE] mod_openzap.c:1352 Hangup
OpenZAP/1:1/xxxxxxxx [CS_CONSUME_MEDIA] [NORMAL_CIRCUIT_CONGESTION]
2009-12-03 17:21:34.724706 [DEBUG] switch_channel.c:1912 Send signal
OpenZAP/1:1/xxxxxxxx [KILL]
2009-12-03 17:21:34.724706 [DEBUG] switch_core_session.c:999 Send signal
OpenZAP/1:1/xxxxxxxx [BREAK]
2009-12-03 17:21:34.724706 [DEBUG] switch_core_state_machine.c:314
(OpenZAP/1:1/xxxxxxxx) Running State Change CS_HANGUP
2009-12-03 17:21:34.724706 [DEBUG] switch_core_state_machine.c:459 thread
mismatch skipping state handler.
2009-12-03 17:21:34.724706 [DEBUG] zap_io.c:1234 channel done 1:1
2009-12-03 17:21:34.724706 [DEBUG] ozmod_analog.c:766 ANALOG CHANNEL 1:1
thread ended.
2009-12-03 17:21:34.724706 [DEBUG] switch_core_state_machine.c:486
(OpenZAP/1:1/xxxxxxxx) State HANGUP
API CALL [originate(openzap/1/1/xxxxxxxx &echo)] output:
-ERR NORMAL_CIRCUIT_CONGESTION

2009-12-03 17:21:34.724706 [DEBUG] switch_ivr_originate.c:2988 Originate
Resulted in Error Cause: 34 [NORMAL_CIRCUIT_CONGESTION]
2009-12-03 17:21:34.725762 [WARNING] mod_openzap.c:474 VETO Changing state
on 1:1 from DOWN to HANGUP
2009-12-03 17:21:34.725762 [DEBUG] mod_openzap.c:510 OpenZAP/1:1/xxxxxxxx
CHANNEL HANGUP
2009-12-03 17:21:34.725762 [DEBUG] switch_core_state_machine.c:46
OpenZAP/1:1/xxxxxxxx Standard HANGUP, cause: NORMAL_CIRCUIT_CONGESTION
2009-12-03 17:21:34.725762 [DEBUG] switch_core_state_machine.c:486
(OpenZAP/1:1/xxxxxxxx) State HANGUP going to sleep
2009-12-03 17:21:34.725762 [DEBUG] switch_core_state_machine.c:333
(OpenZAP/1:1/xxxxxxxx) State Change CS_HANGUP -> CS_REPORTING
2009-12-03 17:21:34.725762 [DEBUG] switch_core_session.c:999 Send signal
OpenZAP/1:1/xxxxxxxx [BREAK]
2009-12-03 17:21:34.725762 [DEBUG] switch_core_state_machine.c:314
(OpenZAP/1:1/xxxxxxxx) Running State Change CS_REPORTING
2009-12-03 17:21:34.725762 [DEBUG] switch_core_state_machine.c:577
(OpenZAP/1:1/xxxxxxxx) State REPORTING
2009-12-03 17:21:34.725762 [DEBUG] switch_core_state_machine.c:53
OpenZAP/1:1/xxxxxxxx Standard REPORTING, cause: NORMAL_CIRCUIT_CONGESTION
2009-12-03 17:21:34.725762 [DEBUG] switch_core_state_machine.c:577
(OpenZAP/1:1/xxxxxxxx) State REPORTING going to sleep
2009-12-03 17:21:34.725762 [DEBUG] switch_core_state_machine.c:327
(OpenZAP/1:1/xxxxxxxx) State Change CS_REPORTING -> CS_DESTROY
2009-12-03 17:21:34.725762 [DEBUG] switch_core_session.c:999 Send signal
OpenZAP/1:1/xxxxxxxx [BREAK]
2009-12-03 17:21:34.725762 [DEBUG] switch_core_session.c:1136 Session 1
(OpenZAP/1:1/xxxxxxxx) Locked, Waiting on external entities
2009-12-03 17:21:34.725762 [NOTICE] switch_core_session.c:1154 Session 1
(OpenZAP/1:1/xxxxxxxx) Ended
2009-12-03 17:21:34.725762 [NOTICE] switch_core_session.c:1156 Close Channel
OpenZAP/1:1/xxxxxxxx [CS_DESTROY]
2009-12-03 17:21:34.725762 [DEBUG] switch_core_state_machine.c:423
(OpenZAP/1:1/xxxxxxxx) Running State Change CS_DESTROY
2009-12-03 17:21:34.725762 [DEBUG] switch_core_state_machine.c:434
(OpenZAP/1:1/xxxxxxxx) State DESTROY
freeswitch at localhost.localdomain> 2009-12-03 17:21:34.726741 [DEBUG]
switch_core_state_machine.c:60 OpenZAP/1:1/xxxxxxxx Standard DESTROY
2009-12-03 17:21:34.726741 [DEBUG] switch_core_state_machine.c:434
(OpenZAP/1:1/xxxxxxxx) State DESTROY going to sleep
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.freeswitch.org/pipermail/freeswitch-users/attachments/20091203/a22e8f5a/attachment-0002.html

More information about the FreeSWITCH-users mailing list