[Freeswitch-users] Translating DTMF from RFC2833 to INFO

[Ognjen Seslija]

Bear in mind that FS will accept both 2833 and INFO in any profile on an
inbound call. Param "dtmf-type" is valid only for outbound calls from the
profile.

Ognjen

On Thu, Dec 3, 2009 at 6:11 AM, Yehavi Bourvine
<yehavi.bourvine at gmail.com>wrote:

> Hello,
>
>   I have Polycom phones which send only RFC-2833 (or inband which I
> dislike) and they should go out to the PSTN via a Cisco gateway. The Cisco
> gateway has some bug and accepts only INFO.
>
> I did a few tests:
>
>    - Some of the phones are on different profile than the Cisco. On their
>    profile I set 'dtmf-type=rfc2833' and on the Cisco's profile I set
>    'dtmf-type=info' and Freeswitch did the translation. All works ok...
>     - Some of the phones are on the same profile as the Cisco, so I must
>    set dtmf-type to rfc2833; it works with internal applications (like
>    voicemail) but does not work through the Cisco as it misinterprets the
>    rfc2833
>
>
> Is there a way to set some variable (or a parameter to the bridge
> application) to do the translation?
>
>                              Thanks! __Yehavi:
>
> _______________________________________________
> FreeSWITCH-users mailing list
> FreeSWITCH-users at lists.freeswitch.org
> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
> http://www.freeswitch.org
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.freeswitch.org/pipermail/freeswitch-users/attachments/20091203/dbcf0a36/attachment-0002.html