[Freeswitch-users] SIP, NAT and Amazon EC2

[Damon Brown]

Hi Brian,
Did you have any luck with the EC2 instances.  I tried a few things, but 
I just cant get RTP to run through it.  PLease let me know.

Best
Damon

Brian West wrote:
> Let me launch mine in 32bit and see what I can do over the weekend...  
> I had this working without a problem.  ;/
>
> /b
>
> On Sep 6, 2008, at 12:09 AM, Damon Brown wrote:
>
>   
>> Ive Tried the following with no success:
>>
>> internal.xml
>>
>>    <param name="ext-rtp-ip" value="75.101.142.208"/>
>>    <param name="ext-sip-ip" value="75.101.142.208"/>
>>
>> Ive also tried just changing the vars.xml file.  I also tried  
>> forwarding the incoming rtp connections to my test pc.  all with no  
>> audio success.  I am sure im doing something wrong I jsut cant find  
>> it.
>>
>> I found another suggestion on the wiki of creating a "double nat"  
>> that listens on 5090.  That didnt change anything either, here is  
>> that information:
>>
>> <settings>
>>    <param name="debug" value="0"/>
>>    <param name="sip-trace" value="no"/>
>>    <param name="rfc2833-pt" value="101"/>
>>    <param name="sip-port" value="5090"/>
>>    <param name="dialplan" value="XML"/>
>>    <param name="context" value="default"/>
>>    <param name="dtmf-duration" value="100"/>
>>    <param name="codec-prefs" value="$${outbound_codec_prefs}"/>
>>    <param name="hold-music" value="$${hold_music}"/>
>>    <param name="use-rtp-timer" value="true"/>
>>    <param name="rtp-timer-name" value="soft"/>
>>    <param name="manage-presence" value="false"/>
>>    <param name="aggressive-nat-detection" value="true"/>
>>    <param name="inbound-codec-negotiation" value="generous"/>
>>    <param name="nonce-ttl" value="60"/>
>>    <param name="auth-calls" value="false"/>
>>    <param name="rtp-timeout-sec" value="1800"/>
>>    <param name="rtp-ip" value="$${local_ip_v4}"/>
>>    <param name="sip-ip" value="$${local_ip_v4}"/>
>>    <param name="ext-rtp-ip" value="$${external_rtp_ip}"/>
>>    <param name="ext-sip-ip" value="$${external_sip_ip}"/>
>>    <param name="rtp-timeout-sec" value="300"/>
>>    <!--<param name="enable-3pcc" value="true"/>-->
>>    <!-- TLS: disabled by default, set to "true" to enable -->
>>    <param name="tls" value="false"/>
>>    <!-- additional bind parameters for TLS -->
>>    <param name="tls-bind-params" value="transport=tls"/>
>>    <!-- Port to listen on for TLS requests. (5061 will be used if  
>> unspecified)$
>>    <param name="tls-sip-port" value="5081"/>
>>    <!-- Location of the agent.pem and cafile.pem ssl certificates  
>> (needed for $
>>    <param name="tls-cert-dir" value="$${base_dir}/conf/ssl"/>
>>    <!-- TLS version ("sslv23" (default), "tlsv1"). NOTE: Phones may  
>> not work w$
>>    <param name="tls-version" value="tlsv1"/>
>>
>>  </settings>
>>
>> Maybe someone can see what is going on here.
>>
>> Thanks,
>> Damon
>>
>>
>> -----Original Message-----
>> From: "Brian West" <brian at freeswitch.org>
>> Sent: Friday, September 5, 2008 6:57pm
>> To: freeswitch-users at lists.freeswitch.org
>> Subject: Re: [Freeswitch-users] SIP, NAT and Amazon EC2
>>
>> You'll have to set an ext-sip-ip and ext-rtp-ip on the internal.xml
>> profile on ec2 duplicate them from the external profile.
>>
>> /b
>>
>> On Sep 5, 2008, at 8:47 PM, Damon Brown wrote:
>>
>>     
>>> Yes, I have all of the valid posts open on my security group
>>> -d
>>>       
>> Brian West
>> sip:brian at freeswitch.org
>>
>>
>>
>>
>>
>>
>>
>> _______________________________________________
>> Freeswitch-users mailing list
>> Freeswitch-users at lists.freeswitch.org
>> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
>> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
>> http://www.freeswitch.org
>>
>>
>>
>> _______________________________________________
>> Freeswitch-users mailing list
>> Freeswitch-users at lists.freeswitch.org
>> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
>> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
>> http://www.freeswitch.org
>>     
>
> Brian West
> sip:brian at freeswitch.org
>
>
>
>
>
>
>
> _______________________________________________
> Freeswitch-users mailing list
> Freeswitch-users at lists.freeswitch.org
> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
> http://www.freeswitch.org
>   
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.freeswitch.org/pipermail/freeswitch-users/attachments/20080908/eff41a40/attachment-0002.html 
-------------- next part --------------
A non-text attachment was scrubbed...
Name: damon.vcf
Type: text/x-vcard
Size: 290 bytes
Desc: not available
Url : http://lists.freeswitch.org/pipermail/freeswitch-users/attachments/20080908/eff41a40/attachment-0002.vcf