[Freeswitch-users] mod_portaudio send 3 rtp packet/60msinsteadof1 packet/20ms
Sluschny, Thomas
Thomas.Sluschny at siemens.com
Tue May 6 06:38:33 PDT 2008
i already tried to implement such a routine, but as i remember i had problems to compile,
anyway this may be help you:
// sleep with smaller tick time, wait in µs
void betterSleep(long wait)
{
LARGE_INTEGER lElapse;
BOOL succ;
HANDLE timerHandle = 0;
DWORD dwWaitResult;
__try {
// return on 0
if (wait < 1)
return;
// create the timer
timerHandle = (HANDLE) CreateWaitableTimerA(NULL, FALSE, NULL);
// set the timer
lElapse.QuadPart = 2500LL - (wait * 10000LL);
succ = SetWaitableTimer(timerHandle, &lElapse, 0, NULL, NULL, FALSE);
if (!succ) {
printf( "set timer not successful!\n" );
}
dwWaitResult = WaitForSingleObject(
timerHandle,
wait // fall back timeout with 15ms granularity
);
switch (dwWaitResult)
{
// The thread got mutex ownership.
case WAIT_OBJECT_0:
//printf( "WAIT_OBJECT_0!\n" );
break;
// Cannot get mutex ownership due to time-out.
case WAIT_TIMEOUT:
printf( "WAIT_TIMEOUT!\n" );
break;
// Got ownership of the abandoned mutex object.
case WAIT_ABANDONED:
printf( "WAIT_ABANDONED!\n" );
break;
}
}
__finally {
if (timerHandle) CloseHandle(timerHandle);
}
}
It may be hard work but: Its cool to be cross platform - you reach all people around
we count on you ;)
Thomas
________________________________
Von: freeswitch-users-bounces at lists.freeswitch.org [mailto:freeswitch-users-bounces at lists.freeswitch.org] Im Auftrag von Anthony Minessale
Gesendet: Dienstag, 6. Mai 2008 15:08
An: freeswitch-users at lists.freeswitch.org
Betreff: Re: [Freeswitch-users] mod_portaudio send 3 rtp packet/60msinsteadof1 packet/20ms
if switch_yield for windows is not working properly maybe if we fix that the code will work as planned.
switch_timer_check tells you if the timer has ticked or not and it's based on a single timer thread that also has the necessity to do 1ms sleeps to broadcast the time changes to the rest of the system. so let's try using performance counters to implement proper switch_yield and see if the code begins to work as planned. I'll try to come up with a patch because there are several places including the RTP code where semi-accurate 1ms sleeps are absolutely necessary.
This is one of the many joys of being cross platform. =D
On Tue, May 6, 2008 at 7:37 AM, Sluschny, Thomas <Thomas.Sluschny at siemens.com> wrote:
Anthony seams to be right.
I tested around a little bit and i see:
- the main problem is the soundcard (-driver), it gives 480 frames all 60 ms
- if i chose 160 (256) frames ringbuffer size i get only 160 frames all 60 ms, and it sounds really croppy (of course, there are not enough samples ...)
- i get really good results if i store the last timestamp when ReadAudioStream() returns, and if current timestamp is less than 20ms from last i wait 20 ms,
so the packet difference went from 60-0-0-60-0-0 ms to 20-20-20-20-20-20
- i use HighPerformanceCounter to measure the time in WinXP
I thought we could use switch_core_timer_check() to do that timestamp work, but it doesn't work as expected,
seams we have to synchronize to the 60ms clock from soundcard, at least at the beginning, which means the delay increase.
Thomas
PS: i attach a patch for better understanding
________________________________
Von: freeswitch-users-bounces at lists.freeswitch.org [mailto:freeswitch-users-bounces at lists.freeswitch.org] Im Auftrag von Anthony Minessale
Gesendet: Dienstag, 6. Mai 2008 00:38
An: freeswitch-users at lists.freeswitch.org
Betreff: Re: [Freeswitch-users] mod_portaudio send 3 rtp packet/60ms insteadof1 packet/20ms
This is not normal sleep it's microsecond sleep. Its done because we are doing nonblocking read on the ringbuffer that's tied to the hardware. Since this is voip, we must drop audio frames when they are late and in order to do that we must have a high resolution loop. This is only a problem when the audio device is not sending audio at the interval we asked it to. Some cheap hardware cannot reliably deliver audio at 20ms intervals which is why i suggested higher value intervals in the config. The request to remove the sleep is to confirm the proposition that sleep 1ms was really taking 15ms.
I appreciate the suggestion and I understand you are not trying to be a smart ass.
On Mon, May 5, 2008 at 4:35 PM, Michael Jerris <mike at jerris.com> wrote:
The place this is trickiest is when you are in a loop where you want
to wait for audio, AND do something every x ms or so. You can't do a
blocking read, and a read with timeout tends to be quite expensive.
There are some ways around this, but sometimes its just the most
efficient, even if not preferred method.
Mike
On May 5, 2008, at 5:26 PM, ?ukasz Zwierko wrote:
> Hi,
>
> Just a thought here: using calls like delay(), sleep() etc. for very
> short amount of time (like in this case a couple of miliseconds)
> should in my opinion be really discouraged. It is often a symptom of
> bad programming even in an embedded enviroment, not mentioning
> platforms like Windows or Linux where you can't really tell what
> priority does your task have, and will it not be starved for a long
> time by other tasks. I should be avoided whenever possible.
> Don't want to sound like a smart ass here, but isn't there any other
> way? From what I understood you wait until some amount of voice
> samples is collected? If that's the case than perhaps you can measure
> an amount of data collected not the time... If these are PCM samples
> than the correlation is straightforward.
> Again, sorry if I'm being a smart ass here but I've seen some really
> bad code with sleep() calls and such like, and I can tell you that it
> only worked fine in specific conditions, and had a tendency to work
> very poorly when for example CPU was under heavy load.
>
> Luaksz
>
> 2008/5/5 Anthony Minessale <anthony.minessale at gmail.com>:
>> did you try setting the ptime on the rtp to 30 or 60ms
>>
>> when you choose a codec in your sip settings on FS in vars.xml,
>> instead of
>> PCMU try PCMU at 30i or PCMU at 60i
>> it may be that the other side is doing 30 or 60 ms and not telling
>> us.
>>
>> also in pablio.c in the portaudio_mod directory in ReadAudioStream
>> func,
>> there is a sleep 1 ms too
>> if the windows is really sleeping a lot longer than that, try
>> omitting line
>> 158.
>> This probably will consume the whole cpu but if it fixes your
>> problem it
>> will support the theory that the sleep on windows in inaccurate.
>>
>>
>>
>>
>>
>> On Mon, May 5, 2008 at 11:38 AM, Csaba Zelei
>> <csaba.zelei at gmail.com> wrote:
>>>
>>>
>>>
>>>
>>> With a little hack I can make mod_portaudio to send rtp packets with
>> ~24ms, ~16ms delay alternately on linux. This result in a constant
>> 4ms
>> jitter but its better than the original. (diff attached)
>>> However on windows the delta between rtp packets is 15-32 ms
>>> randomly,
>> with occasionally high 70-100ms delta.
>>> I also tried to tweak the windows timer without success.
>>> Does anybody has any idea how to make windows xp more accurate?
>>>
>>> Sluschny, Thomas wrote:
>>>
>>>
>>>
>>>
>>> as you can see here:
>>>
>>>
>>> http://jira.freeswitch.org/browse/MODENDP-40
>>>
>>> i have this problem all the time (the error mentioned in this
>>> issue was
>> only related with this).
>>>
>>> It has to do with windows handle sleep() method, you has say
>>> sleep(1) for
>> 1ms but on my
>>>
>>> machine it waits 15ms (it depends on your hardware, other PCs behave
>> different!). So i tested around with high performance counters.
>>>
>>> For now i ignore that problem an set jitterbuffers on other device
>>> big
>> enough.
>>>
>>> Thomas
>>>
>>> ________________________________
>> Von: freeswitch-users-bounces at lists.freeswitch.org
>> [mailto:freeswitch-users-bounces at lists.freeswitch.org] Im Auftrag
>> von Zelei
>> Csaba
>>> Gesendet: Donnerstag, 24. April 2008 19:05
>>> An: freeswitch-users at lists.freeswitch.org
>>> Betreff: [Freeswitch-users] mod_portaudio send 3 rtp packet/60ms
>>> instead
>> of1 packet/20ms
>>>
>>> Dear all,
>>>
>>> I tried to use FS in client mode, starting calls with
>>> mod_portaudio to our
>> providers gateway ( a Cirpack softswitch )
>>> I experienced that there is 2-3 sec delay in the call, its choppy
>>> and
>> robot like.
>>> I tested it with a softphone, and an ip phone and everything was
>>> fine. I
>> traced back the problem to mod_portaudio sending 3 rtp packet in 60ms
>> instead of 1 packet/20ms.
>>>
>>> Here is an rtp statistic from a call: (see
>> http://pastebin.freeswitch.org/4307 for the complete list and sip
>> trace)
>>>
>>> Packet Sequence Delta (ms)
>>> 42 26138 0.00
>>> 43 26139 0.02
>>> 46 26140 45.69
>>> 47 26141 0.02
>>> 48 26142 2.96
>>> 52 26143 56.31
>>> 53 26144 5.75
>>> 54 26145 0.02
>>> 58 26146 51.99
>>> 59 26147 0.03
>>> 60 26148 2.96
>>> 63 26149 42.95
>>> 65 26150 17.06
>>> 66 26151 0.02
>>> 67 26152 2.90
>>> 71 26153 56.99
>>> 72 26154 0.03
>>> 73 26155 0.02
>>>
>>> Did anyone else experience similar problems?
>>> Is this the desired behaviour, because portaudio get data in 60ms
>>> interval
>> or can I set it to 20ms somehow?
>>>
>>> Thanks,
>>>
>>> Csaba Zelei
>>>
>>>
>>> ________________________________
>>
>>> _______________________________________________
>>> Freeswitch-users mailing list
>>> Freeswitch-users at lists.freeswitch.org
>>> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
>>> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
>>> http://www.freeswitch.org
>>>
>>>
>>>
>>> Index: mod_portaudio.c
>>> ===================================================================
>>> --- mod_portaudio.c (revision 8260)
>>> +++ mod_portaudio.c (working copy)
>>> @@ -121,6 +121,7 @@
>>> int ring_interval;
>>> GFLAGS flags;
>>> switch_timer_t timer;
>>> + switch_timer_t sync_timer;
>>> } globals;
>>>
>>>
>>> @@ -282,7 +283,15 @@
>>> }
>>>
>>> switch_set_flag_locked(tech_pvt, TFLAG_IO);
>>> +
>>> + /* Start Synchronization Timer */
>>> + //Is it ok to always use 20ms? What about the 160 sample????
>>> + if (
>> switch_core_timer_init(&globals.sync_timer,"soft",
>> 20,160,switch_core_session_get_pool(session))
>> != SWITCH_STATUS_SUCCESS)
>>> + {
>>> + switch_log_printf(SWITCH_CHANNEL_LOG,
>>> SWITCH_LOG_DEBUG,
>> "Sync Timer failed!!\n");
>>> + }
>>>
>>> +
>>> /* Move Channel's State Machine to RING */
>>> switch_channel_set_state(channel, CS_RING);
>>>
>>> @@ -412,6 +421,8 @@
>>> }
>>>
>>> switch_log_printf(SWITCH_CHANNEL_LOG, SWITCH_LOG_DEBUG, "%s
>>> CHANNEL
>> HANGUP\n",
>> switch_channel_get_name(switch_core_session_get_channel(session)));
>>> + /* Destroy timer */
>>> + switch_core_timer_destroy(&globals.sync_timer);
>>>
>>> return SWITCH_STATUS_SUCCESS;
>>> }
>>> @@ -542,12 +553,17 @@
>>> switch_mutex_lock(globals.device_lock);
>>>
>>> get_samples:
>>> -
>>> +
>>> if ((samples = ReadAudioStream(globals.audio_stream,
>> globals.read_frame.data,
>>>
>> globals.read_codec.implementation->samples_per_frame,
>>>
>> &globals.timer)) == 0) {
>>> +
>>> + //switch_log_printf(SWITCH_CHANNEL_LOG, SWITCH_LOG_DEBUG,
>>> "No data
>> reset timer\n");
>>> + switch_core_timer_sync(&globals.sync_timer);
>>> switch_yield(1000);
>>> +
>>> goto get_samples;
>>> +
>>> } else {
>>> globals.read_frame.datalen = samples * 2;
>>> globals.read_frame.samples = samples;
>>> @@ -562,7 +578,9 @@
>>> status = SWITCH_STATUS_SUCCESS;
>>> }
>>> switch_mutex_unlock(globals.device_lock);
>>> -
>>> +
>>> + switch_core_timer_next(&globals.sync_timer);
>>> +
>>> return status;
>>>
>>> }
>>>
>>>
>>> _______________________________________________
>>> Freeswitch-users mailing list
>>> Freeswitch-users at lists.freeswitch.org
>>> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
>>> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
>>> http://www.freeswitch.org
>>>
>>>
>>
>>
>>
>> --
>> Anthony Minessale II
>>
>> FreeSWITCH http://www.freeswitch.org/
>> ClueCon http://www.cluecon.com/
>>
>> AIM: anthm
>> MSN:anthony_minessale at hotmail.com <mailto:MSN%3Aanthony_minessale at hotmail.com>
>> GTALK/JABBER/PAYPAL:anthony.minessale at gmail.com <mailto:PAYPAL%3Aanthony.minessale at gmail.com>
>> IRC: irc.freenode.net #freeswitch
>>
>> FreeSWITCH Developer Conference
>> sip:888 at conference.freeswitch.org <mailto:sip%3A888 at conference.freeswitch.org>
>> iax:guest at conference.freeswitch.org/888
>> googletalk:conf+888 at conference.freeswitch.org <mailto:googletalk%3Aconf%2B888 at conference.freeswitch.org>
>> pstn:213-799-1400
>> _______________________________________________
>> Freeswitch-users mailing list
>> Freeswitch-users at lists.freeswitch.org
>> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
>> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
>> http://www.freeswitch.org
>>
>>
>
> _______________________________________________
> Freeswitch-users mailing list
> Freeswitch-users at lists.freeswitch.org
> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
> http://www.freeswitch.org
_______________________________________________
Freeswitch-users mailing list
Freeswitch-users at lists.freeswitch.org
http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
http://www.freeswitch.org
--
Anthony Minessale II
FreeSWITCH http://www.freeswitch.org/
ClueCon http://www.cluecon.com/
AIM: anthm
MSN:anthony_minessale at hotmail.com <mailto:MSN%3Aanthony_minessale at hotmail.com>
GTALK/JABBER/PAYPAL:anthony.minessale at gmail.com <mailto:PAYPAL%3Aanthony.minessale at gmail.com>
IRC: irc.freenode.net #freeswitch
FreeSWITCH Developer Conference
sip:888 at conference.freeswitch.org <mailto:sip%3A888 at conference.freeswitch.org>
iax:guest at conference.freeswitch.org/888
googletalk:conf+888 at conference.freeswitch.org <mailto:googletalk%3Aconf%2B888 at conference.freeswitch.org>
pstn:213-799-1400
_______________________________________________
Freeswitch-users mailing list
Freeswitch-users at lists.freeswitch.org
http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
http://www.freeswitch.org
--
Anthony Minessale II
FreeSWITCH http://www.freeswitch.org/
ClueCon http://www.cluecon.com/
AIM: anthm
MSN:anthony_minessale at hotmail.com <mailto:MSN%3Aanthony_minessale at hotmail.com>
GTALK/JABBER/PAYPAL:anthony.minessale at gmail.com <mailto:PAYPAL%3Aanthony.minessale at gmail.com>
IRC: irc.freenode.net #freeswitch
FreeSWITCH Developer Conference
sip:888 at conference.freeswitch.org <mailto:sip%3A888 at conference.freeswitch.org>
iax:guest at conference.freeswitch.org/888
googletalk:conf+888 at conference.freeswitch.org <mailto:googletalk%3Aconf%2B888 at conference.freeswitch.org>
pstn:213-799-1400
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.freeswitch.org/pipermail/freeswitch-users/attachments/20080506/ed9ea961/attachment-0002.html
More information about the FreeSWITCH-users
mailing list