Hi Freeswitch users, if I get an incomming call (FAX), the call is answered and successfully processed, this channel don't get any new calls in until the channel has been reseted by "ftdm stop" and "ftdm start". Please see the log file on http://projekte.priv.de/freeswitch/log You can see there that a fax is comming in on three ISDN lines, but only accepted on one of them. On the first fax it comes in on all three ISDN lines, on the second fax only on two ISDN lines, the third fax is only comming in on one line and all further faxes can't be accepted. After resetet with "ftdm stop" and "ftdm start" it is comming in again. Further config files can be found on http://projekte.priv.de/freeswitch/freetdm.conf.xml http://projekte.priv.de/freeswitch/dialplan.xml http://projekte.priv.de/freeswitch/freetdm.conf http://projekte.priv.de/freeswitch/dahdi_system.conf I am using Debian Squezze with the dahdi-source package to access the, libpri-1.4.12-beta3 and the git fetched with "git clone git:/ /git.freeswitch.org/freeswitch.git " from "Wed Mar 2 20:50:33 2011 -0600" (last entry in git log). Als hardware I have three singleport HFC Cards: 04:00.0 Network controller: Cologne Chip Designs GmbH ISDN network controller [HFC-PCI] (rev 02) 04:01.0 Network controller: Cologne Chip Designs GmbH ISDN network controller [HFC-PCI] (rev 02) 04:02.0 Network controller: Cologne Chip Designs GmbH ISDN network controller [HFC-PCI] (rev 02) root@sip:/usr/local/freeswitch/conf# dahdi_scan [1] active=yes alarms=OK description=HFC-S PCI A ISDN card 0 [TE] name=ZTHFC1 manufacturer=Cologne Chips devicetype=HFC-S PCI-A ISDN location=PCI Bus 04 Slot 01 basechan=1 totchans=3 irq=16 type=digital-TE syncsrc=0 lbo=0 db (CSU)/0-133 feet (DSX-1) coding_opts=AMI framing_opts=CCS coding=AMI framing=CCS [2] active=yes alarms=OK description=HFC-S PCI A ISDN card 1 [TE] name=ZTHFC2 manufacturer=Cologne Chips devicetype=HFC-S PCI-A ISDN location=PCI Bus 04 Slot 02 basechan=4 totchans=3 irq=17 type=digital-TE syncsrc=0 lbo=0 db (CSU)/0-133 feet (DSX-1) coding_opts=AMI framing_opts=CCS coding=AMI framing=CCS [3] active=yes alarms=OK description=HFC-S PCI A ISDN card 2 [TE] name=ZTHFC3 manufacturer=Cologne Chips devicetype=HFC-S PCI-A ISDN location=PCI Bus 04 Slot 03 basechan=7 totchans=3 irq=18 type=digital-TE syncsrc=0 lbo=0 db (CSU)/0-133 feet (DSX-1) coding_opts=AMI framing_opts=CCS coding=AMI framing=CCS root@sip:/usr/local/freeswitch/conf# I am glad for any hits or suggestions! Regards, Markus Mueller