On Fri, Aug 28, 2009 at 2:15 AM, Mathieu Parent <math.parent@gmail.com>wrote:

Hi,

I just started testing Freeswitch, this works well. This is powerfull and easy to administrate.

I just have one problem and one request. The request is BOUNTY-5: IMAP integration of voicemail (I will try to propose a patch if this is within my competencies)

The problem is with mod_fax not receiving any fax.

Relevant extension is: <extension name="fax2mail"> <condition field="destination_number" expression="^(9998)$"> <action application="set" data="fax_verbose=true"/> <action application="set" data="fax_disable_v17=false"/> <action application="set" data="fax_use_ecm=true"/> <action application="answer" /> <action application="playback" data="silence_stream://2000"/> <action application="rxfax" data="/tmp/${uuid}.rxfax.tiff"/> <action application="hangup"/> </condition> </extension>

Test case is a 1-page fax coming from a Minolta printer connected to a Cisco VG248 (via RJ11). The VG248 port is registred on a Cisco Call Manager communicating with FS via a SIP trunk.

Log is attached: - first try from 11:04:05 to 11:04:31 - 2nd try from 11:04:57 to 11:05:22 - 3rd try from 11:05:48 to 11:06:08

Do you need more information?

Put your FS console in debug mode (press F6 or type "console loglevel 7") and then make another test fax call, capturing the output. Look for obvious clues. NOTE: The debug logs are extensive so don't fret if you feel like you're buried in information. Pastebin your log output ( pastebin.freeswitch.org) and put the link in this email thread. The experts can then help you figure it out from there... -MC

Hi Mathieu, On 08/28/2009 05:15 PM, Mathieu Parent wrote:

Hi,

I just started testing Freeswitch, this works well. This is powerfull and easy to administrate.

I just have one problem and one request. The request is BOUNTY-5: IMAP integration of voicemail (I will try to propose a patch if this is within my competencies)

The problem is with mod_fax not receiving any fax.

Relevant extension is: <extension name="fax2mail"> <condition field="destination_number" expression="^(9998)$"> <action application="set" data="fax_verbose=true"/> <action application="set" data="fax_disable_v17=false"/> <action application="set" data="fax_use_ecm=true"/> <action application="answer" /> <action application="playback" data="silence_stream://2000"/> <action application="rxfax" data="/tmp/${uuid}.rxfax.tiff"/> <action application="hangup"/> </condition> </extension>

Test case is a 1-page fax coming from a Minolta printer connected to a Cisco VG248 (via RJ11). The VG248 port is registred on a Cisco Call Manager communicating with FS via a SIP trunk.

Log is attached: - first try from 11:04:05 to 11:04:31 - 2nd try from 11:04:57 to 11:05:22 - 3rd try from 11:05:48 to 11:06:08

Do you need more information?

Regards

Mathieu Parent

The log shows the same thing happening every time. A bad CRC from the far end, followed by a good DCS frame followed by what seems to be rubbish. I think I'd need an audio log from one of these calls to figure out any more. Steve