Extensions cannot be called --> "Default" does not work
Hi, I have set up an auto attendant. I give a call to a number, I hear the music. Then I try to choose an extension. (This is allowed in the options of the auto attendant.) In this case I receive "no_route_destination" because the ext. number is sent to a trunk and is matched by the dialplan ^(\d)$ What can I change that the calls are sent through "default" again? "Default" is of course set by each extensions. Internal.xml and external.xml are recovered to the default ones. Freeswicht is restarted. I use FusionPBX as GUI. I have still the problem. It is anyway possible to give a call to an external number. All the trunks and extensions are registered on a correct way. Has somebody an idea? Thank you for the help. Regards, Istvan
Hi, I have enclosed a short part of my log. The problem is that an extension cannot give a call to an other extensions. Both extensions are registered correctly. Firewall ist not a problem: These extensions were already be able to be called same days ago within the same LAN. The NAT / Firewall-Settings ware not changed. Something was changed in FusionPBX or FreeSwith which makes the system wrong. Could you help me? What I have already made: - external.xml and internal.xml were recovered - FreeSwitch was restarted - all extension have "public" in user context LOG: http://pastebin.com/JxUBANaV It can happen that I have deleted either an internal dialplan or changed the ENUM-settings. Can this cause such troubles? If yes, which setting? Thank you very much for your help. Regards, I. -----Ursprüngliche Nachricht----- Von: freeswitch-users-bounces@lists.freeswitch.org [mailto:freeswitch-users-bounces@lists.freeswitch.org] Im Auftrag von Istvan Turbucz Gesendet: Samstag, 20. November 2010 13:00 An: freeswitch-users@lists.freeswitch.org Betreff: [Freeswitch-users] Extensions cannot be called --> "Default" does not work Hi, I have set up an auto attendant. I give a call to a number, I hear the music. Then I try to choose an extension. (This is allowed in the options of the auto attendant.) In this case I receive "no_route_destination" because the ext. number is sent to a trunk and is matched by the dialplan ^(\d)$ What can I change that the calls are sent through "default" again? "Default" is of course set by each extensions. Internal.xml and external.xml are recovered to the default ones. Freeswicht is restarted. I use FusionPBX as GUI. I have still the problem. It is anyway possible to give a call to an external number. All the trunks and extensions are registered on a correct way. Has somebody an idea? Thank you for the help. Regards, Istvan
The call successfully goes out to a gateway named "Sipgate_2" but fails 404 (not found). So, the gateway on the far end is telling you that it can't find "132" anywhere. You might want to turn on siptrace to see if there is any other information in the 404 message, but most likely you will need to check out the Sipgate_2 gateway to see what's going on. This isn't a FreeSWITCH issue. -MC On Tue, Nov 23, 2010 at 11:33 AM, Isti <pistike040@googlemail.com> wrote:
Hi,
I have enclosed a short part of my log.
The problem is that an extension cannot give a call to an other extensions.
Both extensions are registered correctly. Firewall ist not a problem: These extensions were already be able to be called same days ago within the same LAN. The NAT / Firewall-Settings ware not changed.
Something was changed in FusionPBX or FreeSwith which makes the system wrong.
Could you help me?
What I have already made:
- external.xml and internal.xml were recovered - FreeSwitch was restarted - all extension have "public" in user context
LOG: http://pastebin.com/JxUBANaV
It can happen that I have deleted either an internal dialplan or changed the ENUM-settings. Can this cause such troubles? If yes, which setting?
Thank you very much for your help.
Regards,
I.
-----Ursprüngliche Nachricht----- Von: freeswitch-users-bounces@lists.freeswitch.org [mailto:freeswitch-users-bounces@lists.freeswitch.org] Im Auftrag von Istvan Turbucz Gesendet: Samstag, 20. November 2010 13:00 An: freeswitch-users@lists.freeswitch.org Betreff: [Freeswitch-users] Extensions cannot be called --> "Default" does not work
Hi,
I have set up an auto attendant. I give a call to a number, I hear the music. Then I try to choose an extension. (This is allowed in the options of the auto attendant.)
In this case I receive "no_route_destination" because the ext. number is sent to a trunk and is matched by the dialplan ^(\d)$
What can I change that the calls are sent through "default" again?
"Default" is of course set by each extensions.
Internal.xml and external.xml are recovered to the default ones.
Freeswicht is restarted. I use FusionPBX as GUI.
I have still the problem. It is anyway possible to give a call to an external number. All the trunks and extensions are registered on a correct way.
Has somebody an idea?
Thank you for the help.
Regards,
Istvan
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
participants (3)
-
Isti
-
Istvan Turbucz
-
Michael Collins