I have used a MS-Skype client on the local area network to receive Skype calls and do not have any audio continuity problems, and would conclude that there is not an issue with the firewall if this is working correctly. To the best of my knowledge the external ip addresses and local networks are configured properly in FS. When I use the (linux Skpye client)<=>(mod_skypiax)<=>(FS) to recieve Skype calls however I cannot hear the incoming audio. This problem only occurs with an incoming Skype call (ie cannot hear their audio, they can hear mine). If I make an outgoing call from FS to Skype there are no audio problem. So this is an asymmetrical problem. I have used wireshark and can see UDP packets going in both directions on the local area network. So the incoming audio data is hitting the (linux Skype client). How can I investigate where the data is being dropped? Is it between: (linux Skype client)-->(mod_skypiax) or (mod_skypiax)-->(FS) I need some advice on what debug commands to use to see where the audio is being dropped or some clues as to how to pinpoint where the problem is occurring. For example is (mod_skypiax) getting the audio data from (linux Skype client)? How do investigate that? How do I see that? Are there channel IO byte counters? The machine is using snd_dummy, has no vmware sound card. It is strange the problem is only in one direction? Thanks, Scott Torr On Sat, 15 Aug 2009 17:20 -0400, "Michael Jerris" <mike@jerris.com> wrote:

Make sure your external ip addresses and local networks are configured properly.

Mike

On Aug 15, 2009, at 1:31 PM, Scott Torr wrote:

...

Freeswitch-users,

I'm very new to Freeswitch and have installed the following in VMware Server 2.0.1

ubuntu-8.04.3-server-i386.iso (udate/upgrade) skype-debian_2.0.0.72-1_i386.deb FreeSWITCH Version 1.0.trunk (14492) mod_skypiax

Using the FS wiki to install/setup and making small changes to default XML configs as required.

(phone)--(SIP ATA)--(FS)--(MS-Skype client | Skype 'online number' via PSTN)

The MS-Skype client is on the same local network as FS.

I can make calls from the phone to the Skype Client and this works OK. Audio path OK: phone<-->FS<-->Skype

But ,if I call from the MS-Skype client to the phone I hear no audio from the MS-Skype client.

Audio path: phone<-->FS-->Skype

Likewise a call from a Skype 'online number' can hear for example the default 5000 ivr but the DTMF tones from the PSTN phone are not detected by FS when <action application="start_dtmf" /> is used.

Any suggestions or pointers in the right direction would be much appreciated.

Most likely I have overlook something very obvious to others.

Thanks in advance, Scott Torr

_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org