Re: [Freeswitch-users] mod_opus codec on Windows
Perfect, I'll try it out when I have the time to do so. Thanks for going to places where I wouldn't have normally went through ;) Peter Olsson <peter@olssononline.se> wrote: I just wanted to notify that there is a patch available for this now (FS-5704). It has not yet been commited to git though. If anyone want to test it out, please apply the patch manually. /Peter 9 jul 2013 kl. 08:09 skrev Peter Olsson <peter@olssononline.se>: I think so too. I've started on a complete patch for the Windows build, hopefully I will have some time during this week to complete it. I'll submit this to Jira when finished. 2013/7/8 Michael Jerris <mike@jerris.com>
Are you sure symbol visibility is a problem even if these are in different dll's ? I think this shouldn't be an issue.
Mike
On Jul 6, 2013, at 12:10 PM, Jeff Leung <jleung@v10networks.ca> wrote:
The project was within FreeSWITCH, but the problem is because the way how the opus lib builds, it includes silk and celt and I wasn’t going to have FS to build all of that in tree because I was afraid the symbols from OPUS would conflict with the symbols in CELT and SILK.****
*From:* freeswitch-users-bounces@lists.freeswitch.org [mailto:freeswitch- users-bounces@lists.freeswitch.org] *On Behalf Of *Peter Olsson *Sent:* Saturday, July 6, 2013 2:02 AM *To:* FreeSWITCH Users Help *Subject:* Re: [Freeswitch-users] mod_opus codec on Windows**** ** ** Ah, ok. So you did the build of the lib outside fs, and then just pointed to the built library?**** ** ** I'll start working to get this integrated in the Windows build, by downloading the lib source files, unpacking them, and then building them.* *** ** ** I will submit a Jira as soon as I have some progress. I might get back to you with further questions.**** ** ** /Peter****
** ** 2013/7/6 Jeff Leung <jleung@v10networks.ca>**** The project file is nothing more than having mod_opus to point to an out of tree directory where the actual opus binary libs are built.
The binaries I did was basically a bunch of hacks, there is quite some work needed to be done with integrating the build process of opus with FreeSWITCH's VS solution file
-----Original Message----- From: freeswitch-users-bounces@lists.freeswitch.org [mailto:freeswitch- users-bounces@lists.freeswitch.org] On Behalf Of Peter Olsson Sent: Saturday, July 6, 2013 12:07 AM To: FreeSWITCH Users Help Subject: Re: [Freeswitch-users] mod_opus codec on Windows
Good work! Could you also please file a Jira, and upload the project files and modifications that you've made for this to work? I'd be happy to assist and get this commited.
/Peter
6 jul 2013 kl. 08:20 skrev Jeff Leung <jleung@v10networks.ca>:
As I heard on last Wednesday's conference call, mod_opus isn't "available" on Windows, basically meaning that FreeSWITCH users can't fully implement WebRTC on Windows Platforms just yet.
I have taken the steps to have the codec successfully build on this platform; However it's a pain in the neck to build as the opus library generates multiple libs which includes CELT and SILK codecs (Go figure).
Shoot me a message off-list if you would like to use the binary I've built for Win64 platforms.
Before anybody asks for a 32-bit binary, the short answer is going to be no. I won't be providing a 32-bit binary as I intend this binary to be used in a production environment.
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
i'd like to have test over this, but where to get the patch, i only see the attachment win-opus-build-patch.txt, but where are the .vcproj and .vcxproj.filters, sorry im new to jira. 2013/9/5 Jeff Leung <jleung@v10networks.ca>
Perfect, I'll try it out when I have the time to do so.
Thanks for going to places where I wouldn't have normally went through ;)
Peter Olsson <peter@olssononline.se> wrote:
I just wanted to notify that there is a patch available for this now (FS-5704). It has not yet been commited to git though. If anyone want to test it out, please apply the patch manually.
/Peter
9 jul 2013 kl. 08:09 skrev Peter Olsson <peter@olssononline.se>:
I think so too. I've started on a complete patch for the Windows build, hopefully I will have some time during this week to complete it. I'll submit this to Jira when finished.
2013/7/8 Michael Jerris <mike@jerris.com>
Are you sure symbol visibility is a problem even if these are in different dll's ? I think this shouldn't be an issue.
Mike
On Jul 6, 2013, at 12:10 PM, Jeff Leung <jleung@v10networks.ca> wrote:
The project was within FreeSWITCH, but the problem is because the way how the opus lib builds, it includes silk and celt and I wasn’t going to have FS to build all of that in tree because I was afraid the symbols from OPUS would conflict with the symbols in CELT and SILK.****
*From:* freeswitch-users-bounces@lists.freeswitch.org [mailto: freeswitch- users-bounces@lists.freeswitch.org] *On Behalf Of *Peter Olsson *Sent:* Saturday, July 6, 2013 2:02 AM *To:* FreeSWITCH Users Help *Subject:* Re: [Freeswitch-users] mod_opus codec on Windows**** ** ** Ah, ok. So you did the build of the lib outside fs, and then just pointed to the built library?**** ** ** I'll start working to get this integrated in the Windows build, by downloading the lib source files, unpacking them, and then building them.* *** ** ** I will submit a Jira as soon as I have some progress. I might get back to you with further questions.**** ** ** /Peter****
** ** 2013/7/6 Jeff Leung <jleung@v10networks.ca>**** The project file is nothing more than having mod_opus to point to an out of tree directory where the actual opus binary libs are built.
The binaries I did was basically a bunch of hacks, there is quite some work needed to be done with integrating the build process of opus with FreeSWITCH's VS solution file
-----Original Message----- From: freeswitch-users-bounces@lists.freeswitch.org [mailto: freeswitch- users-bounces@lists.freeswitch.org] On Behalf Of Peter Olsson Sent: Saturday, July 6, 2013 12:07 AM To: FreeSWITCH Users Help Subject: Re: [Freeswitch-users] mod_opus codec on Windows
Good work! Could you also please file a Jira, and upload the project files and modifications that you've made for this to work? I'd be happy to assist and get this commited.
/Peter
6 jul 2013 kl. 08:20 skrev Jeff Leung <jleung@v10networks.ca>:
As I heard on last Wednesday's conference call, mod_opus isn't "available" on Windows, basically meaning that FreeSWITCH users can't fully implement WebRTC on Windows Platforms just yet.
I have taken the steps to have the codec successfully build on this platform; However it's a pain in the neck to build as the opus library generates multiple libs which includes CELT and SILK codecs (Go figure).
Shoot me a message off-list if you would like to use the binary I've built for Win64 platforms.
Before anybody asks for a 32-bit binary, the short answer is going to be no. I won't be providing a 32-bit binary as I intend this binary to be used in a production environment.
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
You need to apply the patch to freeswitch git repo. Run "git apply win-opus-build-patch.txt" in the fs root directory. Also, there was an update on the issue that the patch might not succeed on current git head, but I didn't have time to try it out myself yet. /Peter 2013/12/3 Vincent Xia <gmangudai@gmail.com>
i'd like to have test over this, but where to get the patch, i only see the attachment win-opus-build-patch.txt, but where are the .vcproj and .vcxproj.filters, sorry im new to jira.
2013/9/5 Jeff Leung <jleung@v10networks.ca>
Perfect, I'll try it out when I have the time to do so.
Thanks for going to places where I wouldn't have normally went through ;)
Peter Olsson <peter@olssononline.se> wrote:
I just wanted to notify that there is a patch available for this now (FS-5704). It has not yet been commited to git though. If anyone want to test it out, please apply the patch manually.
/Peter
9 jul 2013 kl. 08:09 skrev Peter Olsson <peter@olssononline.se>:
I think so too. I've started on a complete patch for the Windows build, hopefully I will have some time during this week to complete it. I'll submit this to Jira when finished.
2013/7/8 Michael Jerris <mike@jerris.com>
Are you sure symbol visibility is a problem even if these are in different dll's ? I think this shouldn't be an issue.
Mike
On Jul 6, 2013, at 12:10 PM, Jeff Leung <jleung@v10networks.ca> wrote:
The project was within FreeSWITCH, but the problem is because the way how the opus lib builds, it includes silk and celt and I wasn’t going to have FS to build all of that in tree because I was afraid the symbols from OPUS would conflict with the symbols in CELT and SILK.****
*From:* freeswitch-users-bounces@lists.freeswitch.org [mailto: freeswitch- users-bounces@lists.freeswitch.org] *On Behalf Of *Peter Olsson *Sent:* Saturday, July 6, 2013 2:02 AM *To:* FreeSWITCH Users Help *Subject:* Re: [Freeswitch-users] mod_opus codec on Windows**** ** ** Ah, ok. So you did the build of the lib outside fs, and then just pointed to the built library?**** ** ** I'll start working to get this integrated in the Windows build, by downloading the lib source files, unpacking them, and then building them.* *** ** ** I will submit a Jira as soon as I have some progress. I might get back to you with further questions.**** ** ** /Peter****
** ** 2013/7/6 Jeff Leung <jleung@v10networks.ca>**** The project file is nothing more than having mod_opus to point to an out of tree directory where the actual opus binary libs are built.
The binaries I did was basically a bunch of hacks, there is quite some work needed to be done with integrating the build process of opus with FreeSWITCH's VS solution file
-----Original Message----- From: freeswitch-users-bounces@lists.freeswitch.org [mailto: freeswitch- users-bounces@lists.freeswitch.org] On Behalf Of Peter Olsson Sent: Saturday, July 6, 2013 12:07 AM To: FreeSWITCH Users Help Subject: Re: [Freeswitch-users] mod_opus codec on Windows
Good work! Could you also please file a Jira, and upload the project files and modifications that you've made for this to work? I'd be happy to assist and get this commited.
/Peter
6 jul 2013 kl. 08:20 skrev Jeff Leung <jleung@v10networks.ca>:
As I heard on last Wednesday's conference call, mod_opus isn't "available" on Windows, basically meaning that FreeSWITCH users can't fully implement WebRTC on Windows Platforms just yet.
I have taken the steps to have the codec successfully build on this platform; However it's a pain in the neck to build as the opus library generates multiple libs which includes CELT and SILK codecs (Go figure).
Shoot me a message off-list if you would like to use the binary I've built for Win64 platforms.
Before anybody asks for a 32-bit binary, the short answer is going to be no. I won't be providing a 32-bit binary as I intend this binary to be used in a production environment.
_________________________________________________________________________
Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE: http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
hmmm... after git cloned the latest version and run git apply win-opus-build-patch.txt, i got the following prompts: $ git apply win-opus-build-patch.txt win-opus-build-patch.txt:37: trailing whitespace. Project("{8BC9CEB8-8B4A-11D0-8D11-00A0C91BC942}") = "Download OPUS", "libs\win32 \Download OPUS.2010.vcxproj", "{092124C9-09ED-43C7-BD6D-4AE5D6B3C547}" win-opus-build-patch.txt:38: trailing whitespace. EndProject win-opus-build-patch.txt:39: trailing whitespace. Project("{2150E333-8FDC-42A3-9474-1A3956D46DE8}") = "opus", "opus", "{ED2CA8B5-8 E91-4296-A120-02BB0B674652}" win-opus-build-patch.txt:40: trailing whitespace. EndProject win-opus-build-patch.txt:41: trailing whitespace. Project("{8BC9CEB8-8B4A-11D0-8D11-00A0C91BC942}") = "opus", "libs\win32\opus\opu s.2010.vcxproj", "{FD60942F-72D6-4CA1-8B57-EA1D1B95A89E}" error: patch failed: Freeswitch.2010.sln:572 error: Freeswitch.2010.sln: patch does not apply error: patch failed: Freeswitch.2012.sln:577 error: Freeswitch.2012.sln: patch does not apply 2013/12/3 Peter Olsson <peter@olssononline.se>
You need to apply the patch to freeswitch git repo. Run "git apply win-opus-build-patch.txt" in the fs root directory.
Also, there was an update on the issue that the patch might not succeed on current git head, but I didn't have time to try it out myself yet.
/Peter
2013/12/3 Vincent Xia <gmangudai@gmail.com>
i'd like to have test over this, but where to get the patch, i only see the attachment win-opus-build-patch.txt, but where are the .vcproj and .vcxproj.filters, sorry im new to jira.
2013/9/5 Jeff Leung <jleung@v10networks.ca>
Perfect, I'll try it out when I have the time to do so.
Thanks for going to places where I wouldn't have normally went through ;)
Peter Olsson <peter@olssononline.se> wrote:
I just wanted to notify that there is a patch available for this now (FS-5704). It has not yet been commited to git though. If anyone want to test it out, please apply the patch manually.
/Peter
9 jul 2013 kl. 08:09 skrev Peter Olsson <peter@olssononline.se>:
I think so too. I've started on a complete patch for the Windows build, hopefully I will have some time during this week to complete it. I'll submit this to Jira when finished.
2013/7/8 Michael Jerris <mike@jerris.com>
Are you sure symbol visibility is a problem even if these are in different dll's ? I think this shouldn't be an issue.
Mike
On Jul 6, 2013, at 12:10 PM, Jeff Leung <jleung@v10networks.ca> wrote:
The project was within FreeSWITCH, but the problem is because the way how the opus lib builds, it includes silk and celt and I wasn’t going to have FS to build all of that in tree because I was afraid the symbols from OPUS would conflict with the symbols in CELT and SILK.****
*From:* freeswitch-users-bounces@lists.freeswitch.org [mailto: freeswitch- users-bounces@lists.freeswitch.org] *On Behalf Of *Peter Olsson *Sent:* Saturday, July 6, 2013 2:02 AM *To:* FreeSWITCH Users Help *Subject:* Re: [Freeswitch-users] mod_opus codec on Windows**** ** ** Ah, ok. So you did the build of the lib outside fs, and then just pointed to the built library?**** ** ** I'll start working to get this integrated in the Windows build, by downloading the lib source files, unpacking them, and then building them.* *** ** ** I will submit a Jira as soon as I have some progress. I might get back to you with further questions.**** ** ** /Peter****
** ** 2013/7/6 Jeff Leung <jleung@v10networks.ca>**** The project file is nothing more than having mod_opus to point to an out of tree directory where the actual opus binary libs are built.
The binaries I did was basically a bunch of hacks, there is quite some work needed to be done with integrating the build process of opus with FreeSWITCH's VS solution file
-----Original Message----- From: freeswitch-users-bounces@lists.freeswitch.org [mailto: freeswitch- users-bounces@lists.freeswitch.org] On Behalf Of Peter Olsson Sent: Saturday, July 6, 2013 12:07 AM To: FreeSWITCH Users Help Subject: Re: [Freeswitch-users] mod_opus codec on Windows
Good work! Could you also please file a Jira, and upload the project files and modifications that you've made for this to work? I'd be happy to assist and get this commited.
/Peter
6 jul 2013 kl. 08:20 skrev Jeff Leung <jleung@v10networks.ca>:
As I heard on last Wednesday's conference call, mod_opus isn't "available" on Windows, basically meaning that FreeSWITCH users can't fully implement WebRTC on Windows Platforms just yet.
I have taken the steps to have the codec successfully build on this platform; However it's a pain in the neck to build as the opus library generates multiple libs which includes CELT and SILK codecs (Go figure).
Shoot me a message off-list if you would like to use the binary I've built for Win64 platforms.
Before anybody asks for a 32-bit binary, the short answer is going to be no. I won't be providing a 32-bit binary as I intend this binary to be used in a production environment.
_________________________________________________________________________
Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE: http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
Ok, the patch is probably out dated then. I'll try to upload a new patch this evening, or sometime tomorrow. 2013/12/3 Vincent Xia <gmangudai@gmail.com>
hmmm... after git cloned the latest version and run git apply win-opus-build-patch.txt, i got the following prompts:
$ git apply win-opus-build-patch.txt win-opus-build-patch.txt:37: trailing whitespace. Project("{8BC9CEB8-8B4A-11D0-8D11-00A0C91BC942}") = "Download OPUS", "libs\win32 \Download OPUS.2010.vcxproj", "{092124C9-09ED-43C7-BD6D-4AE5D6B3C547}" win-opus-build-patch.txt:38: trailing whitespace. EndProject win-opus-build-patch.txt:39: trailing whitespace. Project("{2150E333-8FDC-42A3-9474-1A3956D46DE8}") = "opus", "opus", "{ED2CA8B5-8 E91-4296-A120-02BB0B674652}" win-opus-build-patch.txt:40: trailing whitespace. EndProject win-opus-build-patch.txt:41: trailing whitespace. Project("{8BC9CEB8-8B4A-11D0-8D11-00A0C91BC942}") = "opus", "libs\win32\opus\opu s.2010.vcxproj", "{FD60942F-72D6-4CA1-8B57-EA1D1B95A89E}" error: patch failed: Freeswitch.2010.sln:572 error: Freeswitch.2010.sln: patch does not apply error: patch failed: Freeswitch.2012.sln:577 error: Freeswitch.2012.sln: patch does not apply
2013/12/3 Peter Olsson <peter@olssononline.se>
You need to apply the patch to freeswitch git repo. Run "git apply win-opus-build-patch.txt" in the fs root directory.
Also, there was an update on the issue that the patch might not succeed on current git head, but I didn't have time to try it out myself yet.
/Peter
2013/12/3 Vincent Xia <gmangudai@gmail.com>
i'd like to have test over this, but where to get the patch, i only see the attachment win-opus-build-patch.txt, but where are the .vcproj and .vcxproj.filters, sorry im new to jira.
2013/9/5 Jeff Leung <jleung@v10networks.ca>
Perfect, I'll try it out when I have the time to do so.
Thanks for going to places where I wouldn't have normally went through ;)
Peter Olsson <peter@olssononline.se> wrote:
I just wanted to notify that there is a patch available for this now (FS-5704). It has not yet been commited to git though. If anyone want to test it out, please apply the patch manually.
/Peter
9 jul 2013 kl. 08:09 skrev Peter Olsson <peter@olssononline.se>:
I think so too. I've started on a complete patch for the Windows build, hopefully I will have some time during this week to complete it. I'll submit this to Jira when finished.
2013/7/8 Michael Jerris <mike@jerris.com>
Are you sure symbol visibility is a problem even if these are in different dll's ? I think this shouldn't be an issue.
Mike
On Jul 6, 2013, at 12:10 PM, Jeff Leung <jleung@v10networks.ca> wrote:
The project was within FreeSWITCH, but the problem is because the way how the opus lib builds, it includes silk and celt and I wasn’t going to have FS to build all of that in tree because I was afraid the symbols from OPUS would conflict with the symbols in CELT and SILK.****
*From:* freeswitch-users-bounces@lists.freeswitch.org [mailto: freeswitch- users-bounces@lists.freeswitch.org] *On Behalf Of *Peter Olsson *Sent:* Saturday, July 6, 2013 2:02 AM *To:* FreeSWITCH Users Help *Subject:* Re: [Freeswitch-users] mod_opus codec on Windows**** ** ** Ah, ok. So you did the build of the lib outside fs, and then just pointed to the built library?**** ** ** I'll start working to get this integrated in the Windows build, by downloading the lib source files, unpacking them, and then building them.* *** ** ** I will submit a Jira as soon as I have some progress. I might get back to you with further questions.**** ** ** /Peter****
** ** 2013/7/6 Jeff Leung <jleung@v10networks.ca>**** The project file is nothing more than having mod_opus to point to an out of tree directory where the actual opus binary libs are built.
The binaries I did was basically a bunch of hacks, there is quite some work needed to be done with integrating the build process of opus with FreeSWITCH's VS solution file
-----Original Message----- From: freeswitch-users-bounces@lists.freeswitch.org [mailto: freeswitch- users-bounces@lists.freeswitch.org] On Behalf Of Peter Olsson Sent: Saturday, July 6, 2013 12:07 AM To: FreeSWITCH Users Help Subject: Re: [Freeswitch-users] mod_opus codec on Windows
Good work! Could you also please file a Jira, and upload the project files and modifications that you've made for this to work? I'd be happy to assist and get this commited.
/Peter
6 jul 2013 kl. 08:20 skrev Jeff Leung <jleung@v10networks.ca>:
> As I heard on last Wednesday's conference call, mod_opus isn't "available" > on Windows, basically meaning that FreeSWITCH users can't fully > implement WebRTC on Windows Platforms just yet. > > I have taken the steps to have the codec successfully build on this > platform; However it's a pain in the neck to build as the opus library > generates multiple libs which includes CELT and SILK codecs (Go figure). > > Shoot me a message off-list if you would like to use the binary I've > built for Win64 platforms. > > Before anybody asks for a 32-bit binary, the short answer is going to be no. > I won't be providing a 32-bit binary as I intend this binary to be > used in a production environment. > >
_________________________________________________________________________
Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE: http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE: http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
to share my test results: i tried this out anyway by adding --reject and after did some manual work, i can now build mod_opus.dll with vs2010 and tested it with FS running under windows server 2008, it works perfect! many thanks to all for your help! 2013/12/3 Peter Olsson <peter@olssononline.se>
Ok, the patch is probably out dated then. I'll try to upload a new patch this evening, or sometime tomorrow.
2013/12/3 Vincent Xia <gmangudai@gmail.com>
hmmm... after git cloned the latest version and run git apply win-opus-build-patch.txt, i got the following prompts:
$ git apply win-opus-build-patch.txt win-opus-build-patch.txt:37: trailing whitespace. Project("{8BC9CEB8-8B4A-11D0-8D11-00A0C91BC942}") = "Download OPUS", "libs\win32 \Download OPUS.2010.vcxproj", "{092124C9-09ED-43C7-BD6D-4AE5D6B3C547}" win-opus-build-patch.txt:38: trailing whitespace. EndProject win-opus-build-patch.txt:39: trailing whitespace. Project("{2150E333-8FDC-42A3-9474-1A3956D46DE8}") = "opus", "opus", "{ED2CA8B5-8 E91-4296-A120-02BB0B674652}" win-opus-build-patch.txt:40: trailing whitespace. EndProject win-opus-build-patch.txt:41: trailing whitespace. Project("{8BC9CEB8-8B4A-11D0-8D11-00A0C91BC942}") = "opus", "libs\win32\opus\opu s.2010.vcxproj", "{FD60942F-72D6-4CA1-8B57-EA1D1B95A89E}" error: patch failed: Freeswitch.2010.sln:572 error: Freeswitch.2010.sln: patch does not apply error: patch failed: Freeswitch.2012.sln:577 error: Freeswitch.2012.sln: patch does not apply
2013/12/3 Peter Olsson <peter@olssononline.se>
You need to apply the patch to freeswitch git repo. Run "git apply win-opus-build-patch.txt" in the fs root directory.
Also, there was an update on the issue that the patch might not succeed on current git head, but I didn't have time to try it out myself yet.
/Peter
2013/12/3 Vincent Xia <gmangudai@gmail.com>
i'd like to have test over this, but where to get the patch, i only see the attachment win-opus-build-patch.txt, but where are the .vcproj and .vcxproj.filters, sorry im new to jira.
2013/9/5 Jeff Leung <jleung@v10networks.ca>
Perfect, I'll try it out when I have the time to do so.
Thanks for going to places where I wouldn't have normally went through ;)
Peter Olsson <peter@olssononline.se> wrote:
I just wanted to notify that there is a patch available for this now (FS-5704). It has not yet been commited to git though. If anyone want to test it out, please apply the patch manually.
/Peter
9 jul 2013 kl. 08:09 skrev Peter Olsson <peter@olssononline.se>:
I think so too. I've started on a complete patch for the Windows build, hopefully I will have some time during this week to complete it. I'll submit this to Jira when finished.
2013/7/8 Michael Jerris <mike@jerris.com>
Are you sure symbol visibility is a problem even if these are in different dll's ? I think this shouldn't be an issue.
Mike
On Jul 6, 2013, at 12:10 PM, Jeff Leung <jleung@v10networks.ca> wrote:
The project was within FreeSWITCH, but the problem is because the way how the opus lib builds, it includes silk and celt and I wasn’t going to have FS to build all of that in tree because I was afraid the symbols from OPUS would conflict with the symbols in CELT and SILK.****
*From:* freeswitch-users-bounces@lists.freeswitch.org [mailto: freeswitch- users-bounces@lists.freeswitch.org] *On Behalf Of *Peter Olsson *Sent:* Saturday, July 6, 2013 2:02 AM *To:* FreeSWITCH Users Help *Subject:* Re: [Freeswitch-users] mod_opus codec on Windows**** ** ** Ah, ok. So you did the build of the lib outside fs, and then just pointed to the built library?**** ** ** I'll start working to get this integrated in the Windows build, by downloading the lib source files, unpacking them, and then building them.* *** ** ** I will submit a Jira as soon as I have some progress. I might get back to you with further questions.**** ** ** /Peter****
** ** 2013/7/6 Jeff Leung <jleung@v10networks.ca>**** The project file is nothing more than having mod_opus to point to an out of tree directory where the actual opus binary libs are built.
The binaries I did was basically a bunch of hacks, there is quite some work needed to be done with integrating the build process of opus with FreeSWITCH's VS solution file
> -----Original Message----- > From: freeswitch-users-bounces@lists.freeswitch.org [mailto: freeswitch- > users-bounces@lists.freeswitch.org] On Behalf Of Peter Olsson > Sent: Saturday, July 6, 2013 12:07 AM > To: FreeSWITCH Users Help > Subject: Re: [Freeswitch-users] mod_opus codec on Windows > > Good work! Could you also please file a Jira, and upload the project files and > modifications that you've made for this to work? I'd be happy to assist and > get this commited. > > /Peter > > 6 jul 2013 kl. 08:20 skrev Jeff Leung <jleung@v10networks.ca>: > > > As I heard on last Wednesday's conference call, mod_opus isn't "available" > > on Windows, basically meaning that FreeSWITCH users can't fully > > implement WebRTC on Windows Platforms just yet. > > > > I have taken the steps to have the codec successfully build on this > > platform; However it's a pain in the neck to build as the opus library > > generates multiple libs which includes CELT and SILK codecs (Go figure). > > > > Shoot me a message off-list if you would like to use the binary I've > > built for Win64 platforms. > > > > Before anybody asks for a 32-bit binary, the short answer is going to be no. > > I won't be providing a 32-bit binary as I intend this binary to be > > used in a production environment. > > > >
_________________________________________________________________________
Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE: http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE: http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE: http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
That is great news! I'll try to submit a new patch as soon as possible. 2013/12/4 Vincent Xia <gmangudai@gmail.com>
to share my test results:
i tried this out anyway by adding --reject and after did some manual work, i can now build mod_opus.dll with vs2010 and tested it with FS running under windows server 2008, it works perfect!
many thanks to all for your help!
2013/12/3 Peter Olsson <peter@olssononline.se>
Ok, the patch is probably out dated then. I'll try to upload a new patch this evening, or sometime tomorrow.
2013/12/3 Vincent Xia <gmangudai@gmail.com>
hmmm... after git cloned the latest version and run git apply win-opus-build-patch.txt, i got the following prompts:
$ git apply win-opus-build-patch.txt win-opus-build-patch.txt:37: trailing whitespace. Project("{8BC9CEB8-8B4A-11D0-8D11-00A0C91BC942}") = "Download OPUS", "libs\win32 \Download OPUS.2010.vcxproj", "{092124C9-09ED-43C7-BD6D-4AE5D6B3C547}" win-opus-build-patch.txt:38: trailing whitespace. EndProject win-opus-build-patch.txt:39: trailing whitespace. Project("{2150E333-8FDC-42A3-9474-1A3956D46DE8}") = "opus", "opus", "{ED2CA8B5-8 E91-4296-A120-02BB0B674652}" win-opus-build-patch.txt:40: trailing whitespace. EndProject win-opus-build-patch.txt:41: trailing whitespace. Project("{8BC9CEB8-8B4A-11D0-8D11-00A0C91BC942}") = "opus", "libs\win32\opus\opu s.2010.vcxproj", "{FD60942F-72D6-4CA1-8B57-EA1D1B95A89E}" error: patch failed: Freeswitch.2010.sln:572 error: Freeswitch.2010.sln: patch does not apply error: patch failed: Freeswitch.2012.sln:577 error: Freeswitch.2012.sln: patch does not apply
2013/12/3 Peter Olsson <peter@olssononline.se>
You need to apply the patch to freeswitch git repo. Run "git apply win-opus-build-patch.txt" in the fs root directory.
Also, there was an update on the issue that the patch might not succeed on current git head, but I didn't have time to try it out myself yet.
/Peter
2013/12/3 Vincent Xia <gmangudai@gmail.com>
i'd like to have test over this, but where to get the patch, i only see the attachment win-opus-build-patch.txt, but where are the .vcproj and .vcxproj.filters, sorry im new to jira.
2013/9/5 Jeff Leung <jleung@v10networks.ca>
Perfect, I'll try it out when I have the time to do so.
Thanks for going to places where I wouldn't have normally went through ;)
Peter Olsson <peter@olssononline.se> wrote:
I just wanted to notify that there is a patch available for this now (FS-5704). It has not yet been commited to git though. If anyone want to test it out, please apply the patch manually.
/Peter
9 jul 2013 kl. 08:09 skrev Peter Olsson <peter@olssononline.se>:
I think so too. I've started on a complete patch for the Windows build, hopefully I will have some time during this week to complete it. I'll submit this to Jira when finished.
2013/7/8 Michael Jerris <mike@jerris.com>
> Are you sure symbol visibility is a problem even if these are in different > dll's ? I think this shouldn't be an issue. > > Mike > > On Jul 6, 2013, at 12:10 PM, Jeff Leung <jleung@v10networks.ca> wrote: > > The project was within FreeSWITCH, but the problem is because the way how > the opus lib builds, it includes silk and celt and I wasn’t going to have > FS to build all of that in tree because I was afraid the symbols from OPUS > would conflict with the symbols in CELT and SILK.**** > > *From:* freeswitch-users-bounces@lists.freeswitch.org [mailto: freeswitch- > users-bounces@lists.freeswitch.org] *On Behalf Of *Peter Olsson > *Sent:* Saturday, July 6, 2013 2:02 AM > *To:* FreeSWITCH Users Help > *Subject:* Re: [Freeswitch-users] mod_opus codec on Windows**** > ** ** > Ah, ok. So you did the build of the lib outside fs, and then just pointed > to the built library?**** > ** ** > I'll start working to get this integrated in the Windows build, by > downloading the lib source files, unpacking them, and then building them.* > *** > ** ** > I will submit a Jira as soon as I have some progress. I might get back to > you with further questions.**** > ** ** > /Peter**** > > ** ** > 2013/7/6 Jeff Leung <jleung@v10networks.ca>**** > The project file is nothing more than having mod_opus to point to an out of > tree directory where the actual opus binary libs are built. > > The binaries I did was basically a bunch of hacks, there is quite some work > needed to be done with integrating the build process of opus with > FreeSWITCH's VS solution file > > > -----Original Message----- > > From: freeswitch-users-bounces@lists.freeswitch.org [mailto: freeswitch- > > users-bounces@lists.freeswitch.org] On Behalf Of Peter Olsson > > Sent: Saturday, July 6, 2013 12:07 AM > > To: FreeSWITCH Users Help > > Subject: Re: [Freeswitch-users] mod_opus codec on Windows > > > > Good work! Could you also please file a Jira, and upload the project > files > and > > modifications that you've made for this to work? I'd be happy to assist > and > > get this commited. > > > > /Peter > > > > 6 jul 2013 kl. 08:20 skrev Jeff Leung <jleung@v10networks.ca>: > > > > > As I heard on last Wednesday's conference call, mod_opus isn't > "available" > > > on Windows, basically meaning that FreeSWITCH users can't fully > > > implement WebRTC on Windows Platforms just yet. > > > > > > I have taken the steps to have the codec successfully build on this > > > platform; However it's a pain in the neck to build as the opus library > > > generates multiple libs which includes CELT and SILK codecs (Go > figure). > > > > > > Shoot me a message off-list if you would like to use the binary I've > > > built for Win64 platforms. > > > > > > Before anybody asks for a 32-bit binary, the short answer is going to > be > no. > > > I won't be providing a 32-bit binary as I intend this binary to be > > > used in a production environment. > > > > > > > > > _________________________________________________________________________ > Professional FreeSWITCH Consulting Services: > consulting@freeswitch.org > http://www.freeswitchsolutions.com > > FreeSWITCH-powered IP PBX: The CudaTel Communication Server > http://www.cudatel.com > > Official FreeSWITCH Sites > http://www.freeswitch.org > http://wiki.freeswitch.org > http://www.cluecon.com > > FreeSWITCH-users mailing list > FreeSWITCH-users@lists.freeswitch.org > http://lists.freeswitch.org/mailman/listinfo/freeswitch-users > UNSUBSCRIBE: http://lists.freeswitch.org/mailman/options/freeswitch-users > http://www.freeswitch.org > >
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE: http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE: http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE: http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
participants (3)
-
Jeff Leung
-
Peter Olsson
-
Vincent Xia