Hello there, I have a setup where I would like FreeSWITCH to make an outbound ESL connection to a proxy-like service. The proxy-like service should then make FreeSWITCH open another outbound ESL connection to a different service that will handle the call. The proxy-like service should be as transparent as possible. Ideally, it should be possible to 'skip' it, and point FreeSWITCH directly to the service that handles the call. Currently, I have a dialplan that looks like this: -- <action application="set" data="continue_on_fail=true"/> <action application="set" data="hangup_after_bridge=true"/> <action application="set" data="ringback=%(1000,4000,425)"/> <action application="socket" data="127.0.0.1:3000 async full"/> <action application="hangup" data="FACILITY_NOT_IMPLEMENTED"/> -- The proxy-like service listenens on port 3000. It will order FreeSWITCH to execute the following command: socket 127.0.0.1:3001 async full This works, somewhat. I would like the proxy-service to terminate the connection as fast as possible. However, if I send the exit-command[1] before the call is bridged to the hangup from the XML dialplan is executed. If the call is bridged when I send the exit-command, it works fine. I would like the service on 3001 to emit a custom event, which the proxy-like service listens for and terminates the ESL connection. Currently I need to sleep a little while and then terminate the ESL connection. How do I keep the hangup from being executed, when there is an open outbound ESL connection? I currently use FreeSWITCH Version 1.4.15+git~20141229T185951Z~507a0f22c5~64bit (git 507a0f2 2014-12-29 18:59:51Z 64bit). I hope this makes sense. Regards, Asbjørn [1] https://freeswitch.org/confluence/display/FREESWITCH/mod_event_socket#mod_ev...