Re: [Freeswitch-users] FreeSWITCH-users Digest, Vol 55, Issue 29
Thanks Wasim ! That solved the problem. My link is up and am not able to make outbound calling. I am taking that discussion to the asterisk-ss7 group. Thanks, Anita. On Tue, Jan 4, 2011 at 6:43 AM, < freeswitch-users-request@lists.freeswitch.org> wrote:
Send FreeSWITCH-users mailing list submissions to freeswitch-users@lists.freeswitch.org
To subscribe or unsubscribe via the World Wide Web, visit http://lists.freeswitch.org/mailman/listinfo/freeswitch-users or, via email, send a message with subject or body 'help' to freeswitch-users-request@lists.freeswitch.org
You can reach the person managing the list at freeswitch-users-owner@lists.freeswitch.org
When replying, please edit your Subject line so it is more specific than "Re: Contents of FreeSWITCH-users digest..."
Today's Topics:
1. Re: calling card app (Michael Collins) 2. Re: calling card app (Rafqat .) 3. Re: libss7 * Sangoma (Wasim Baig)
---------- Forwarded message ---------- From: Michael Collins <msc@freeswitch.org> To: FreeSWITCH Users Help <freeswitch-users@lists.freeswitch.org> Date: Mon, 3 Jan 2011 13:41:57 -0800 Subject: Re: [Freeswitch-users] calling card app
On Mon, Jan 3, 2011 at 1:17 PM, Rafqat . <rafonline@hotmail.com> wrote:
btw.
My lua script currently does the following:
1. Ask for PIN. 2. Gets funds for PIN (DB lookup using freeswitch.Dbh) and informs the user of the funds. 3. Ask for destination number. 4. Checks if enough funds (again using freeswitch Dbh). 5. Gets auto route using mod_lcr. 6. Populates leg b session variables necessary for mod_nibble. 7. Does the bridging.
As per your advice I will move the bridging stuff out of the script. Do you think the rest will be ok in lua?
I'd say that looks good. The Lua script only stays active until you get to step 7 where you do a transfer instead of bridge. It's only a few seconds of work. -MC
CHeers
Raf
------------------------------ From: rafonline@hotmail.com
To: freeswitch-users@lists.freeswitch.org Subject: RE: [Freeswitch-users] calling card app Date: Mon, 3 Jan 2011 21:07:33 +0000
Thanks very much for the advice.
Much Appreciated.
------------------------------ Date: Mon, 3 Jan 2011 11:31:57 -0800 From: msc@freeswitch.org To: freeswitch-users@lists.freeswitch.org Subject: Re: [Freeswitch-users] calling card app
If you have a powerful machine then you can probably scale to several hundred concurrent calls, depending on transcoding, call recording needs, etc. We've seen some boxes that can handle literally thousands of concurrent calls, but the scenarios are never exactly the same. Also, Lua is very lightweight, so if you're using it just to capture a PIN code or something then you should be okay. Just be sure to exit the Lua script and let the dialplan handle the bridge app. (See chapter 7 of the FS book for more information on Lua scripting tips.)
-MC
On Sun, Jan 2, 2011 at 11:13 AM, Rafqat . <rafonline@hotmail.com> wrote:
Hi
As stated in some of my previous posts, I am writing a calling card system (not too sure of potential number of concurrent users yet).
At the moment I am simply doing everything in a single lua script utilising mod_lcr and mod_nibble. It seems to work ok, but I have not stress tested it yet.
I was wondering (at a high level) if this will suffice or should I be offloading operations such as pin validation and credit checking to another server (maybe utilising mod_rad_auth?).
Cheers
Raf
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-usersUNSUBSCRIBE: http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
---------- Forwarded message ---------- From: "Rafqat ." <rafonline@hotmail.com> To: <freeswitch-users@lists.freeswitch.org> Date: Mon, 3 Jan 2011 22:02:11 +0000 Subject: Re: [Freeswitch-users] calling card app
Thanks again for your help MC.
------------------------------ Date: Mon, 3 Jan 2011 13:41:57 -0800 From: msc@freeswitch.org To: freeswitch-users@lists.freeswitch.org Subject: Re: [Freeswitch-users] calling card app
On Mon, Jan 3, 2011 at 1:17 PM, Rafqat . <rafonline@hotmail.com> wrote:
btw.
My lua script currently does the following:
1. Ask for PIN. 2. Gets funds for PIN (DB lookup using freeswitch.Dbh) and informs the user of the funds. 3. Ask for destination number. 4. Checks if enough funds (again using freeswitch Dbh). 5. Gets auto route using mod_lcr. 6. Populates leg b session variables necessary for mod_nibble. 7. Does the bridging.
As per your advice I will move the bridging stuff out of the script. Do you think the rest will be ok in lua?
I'd say that looks good. The Lua script only stays active until you get to step 7 where you do a transfer instead of bridge. It's only a few seconds of work. -MC
CHeers
Raf
------------------------------ From: rafonline@hotmail.com
To: freeswitch-users@lists.freeswitch.org Subject: RE: [Freeswitch-users] calling card app Date: Mon, 3 Jan 2011 21:07:33 +0000
Thanks very much for the advice.
Much Appreciated.
------------------------------ Date: Mon, 3 Jan 2011 11:31:57 -0800 From: msc@freeswitch.org To: freeswitch-users@lists.freeswitch.org Subject: Re: [Freeswitch-users] calling card app
If you have a powerful machine then you can probably scale to several hundred concurrent calls, depending on transcoding, call recording needs, etc. We've seen some boxes that can handle literally thousands of concurrent calls, but the scenarios are never exactly the same. Also, Lua is very lightweight, so if you're using it just to capture a PIN code or something then you should be okay. Just be sure to exit the Lua script and let the dialplan handle the bridge app. (See chapter 7 of the FS book for more information on Lua scripting tips.)
-MC
On Sun, Jan 2, 2011 at 11:13 AM, Rafqat . <rafonline@hotmail.com> wrote:
Hi
As stated in some of my previous posts, I am writing a calling card system (not too sure of potential number of concurrent users yet).
At the moment I am simply doing everything in a single lua script utilising mod_lcr and mod_nibble. It seems to work ok, but I have not stress tested it yet.
I was wondering (at a high level) if this will suffice or should I be offloading operations such as pin validation and credit checking to another server (maybe utilising mod_rad_auth?).
Cheers
Raf
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE: http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE: http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
---------- Forwarded message ---------- From: Wasim Baig <wasim@convergence.pk> To: FreeSWITCH Users Help <freeswitch-users@lists.freeswitch.org> Date: Tue, 4 Jan 2011 06:12:34 +0500 Subject: Re: [Freeswitch-users] libss7 * Sangoma anita:
asterisk-ss7 is the correct list for this
change TDMV_DCHAN = 16 to TDMV_DCHAN = 0 in wanpipeX.conf
fwiw, chan_ss7 is nicer ...
-wasim
On Mon, Jan 3, 2011 at 22:57, Anita Hall <anita.hall@simmortel.com> wrote:
Hi
This question pertains libss7 with Sangoma A108 card on Asterisk. It does not concern freeswitch but I suppose Sangoma folks frequent this list more :)
I am unable to make libss7 work with Sangoma. Here are the details.
Could you please provide me some pointers ?
Thanks, Anita.
debian:~# uname -a Linux debian 2.6.26-2-686 #1 SMP Thu Nov 25 01:53:57 UTC 2010 i686 GNU/Linux
debian:~# dahdi_hardware pci:0000:05:04.0 wanpipe- 1923:0100 Sangoma Technologies Corp. A104d QUAD T1/E1 AFT card pci:0000:07:04.0 wanpipe- 1923:0100 Sangoma Technologies Corp. A104d QUAD T1/E1 AFT card
debian:~# cat /etc/dahdi/system.conf #autogenerated by /usr/sbin/wancfg_dahdi do not hand edit #autogenrated on 2011-01-03 #Dahdi Channels Configurations #For detailed Dahdi options, view /etc/dahdi/system.conf.bak loadzone=us defaultzone=us
#Sangoma A108 port 1 [slot:4 bus:5 span:1] <wanpipe1> span=1,1,0,ccs,hdb3,crc4 bchan=1-15,17-31 echocanceller=mg2,1-15,17-31 mtp2=16
#Sangoma A108 port 2 [slot:4 bus:5 span:2] <wanpipe2> span=2,1,0,ccs,hdb3,crc4 bchan=32-46,48-62 echocanceller=mg2,32-46,48-62 mtp2=47
debian:~# cat /etc/wanpipe/wanpipe1.conf #============================= =================== # WANPIPE1 Configuration File #================================================ # # Date: Wed Dec 6 20:29:03 UTC 2006 # # Note: This file was generated automatically # by /usr/local/sbin/setup-sangoma program. # # If you want to edit this file, it is # recommended that you use wancfg program # to do so. #================================================ # Sangoma Technologies Inc. #================================================
[devices] wanpipe1 = WAN_AFT_TE1, Comment
[interfaces] w1g1 = wanpipe1, , TDM_VOICE, Comment
[wanpipe1] CARD_TYPE = AFT S514CPU = A CommPort = PRI AUTO_PCISLOT = NO PCISLOT = 4 PCIBUS = 5 FE_MEDIA = E1 FE_LCODE = HDB3 FE_FRAME = NCRC4 FE_LINE = 1 TE_CLOCK = NORMAL TE_REF_CLOCK = 0 TE_SIG_MODE = CCS TE_HIGHIMPEDANCE = NO LBO = 120OH FE_TXTRISTATE = NO MTU = 1500 UDPPORT = 9000 TTL = 255 IGNORE_FRONT_END = NO TDMV_SPAN = 1 TDMV_DCHAN = 16 TDMV_HW_DTMF = NO TDMV_HW_FAX_DETECT = NO
[w1g1] ACTIVE_CH = ALL TDMV_HWEC = NO
debian:~# cat /etc/wanpipe/wanpipe2.conf #================================================ # WANPIPE1 Configuration File #================================================ # # Date: Wed Dec 6 20:29:03 UTC 2006 # # Note: This file was generated automatically # by /usr/local/sbin/setup-sangoma program. # # If you want to edit this file, it is # recommended that you use wancfg program # to do so. #================================================ # Sangoma Technologies Inc. #================================================
[devices] wanpipe2 = WAN_AFT_TE1, Comment
[interfaces] w2g1 = wanpipe2, , TDM_VOICE, Comment
[wanpipe2] CARD_TYPE = AFT S514CPU = A CommPort = PRI AUTO_PCISLOT = NO PCISLOT = 4 PCIBUS = 5 FE_MEDIA = E1 FE_LCODE = HDB3 FE_FRAME = NCRC4 FE_LINE = 2 TE_CLOCK = NORMAL TE_REF_CLOCK = 0 TE_SIG_MODE = CCS TE_HIGHIMPEDANCE = NO LBO = 120OH FE_TXTRISTATE = NO MTU = 1500 UDPPORT = 9000 TTL = 255 IGNORE_FRONT_END = NO TDMV_SPAN = 2 TDMV_DCHAN = 16 TDMV_HW_DTMF = NO TDMV_HW_FAX_DETECT = NO
[w2g1] ACTIVE_CH = ALL TDMV_HWEC = NO
debian:~# cat /etc/asterisk/chan_dahdi.conf ;autogenerated by /usr/sbin/wancfg_dahdi do not hand edit ;autogenrated on 2011-01-03 ;Dahdi Channels Configurations ;For detailed Dahdi options, view /etc/asterisk/chan_dahdi.conf.bak
[trunkgroups]
[channels] context=default usecallerid=yes hidecallerid=no callwaiting=yes usecallingpres=yes callwaitingcallerid=yes threewaycalling=yes transfer=yes canpark=yes cancallforward=yes callreturn=yes echocancel=yes echocancelwhenbridged=yes relaxdtmf=yes rxgain=0.0 txgain=0.0 group=1 callgroup=1 pickupgroup=1 immediate=no
;Sangoma A108 port 1 [slot:4 bus:5 span:1] <wanpipe1> switchtype=euroisdn context=tata group=1 echocancel=yes signaling=ss7 ;this is ss7 signaling ss7type=itu ;using the ITU variant ss7_called_nai=dynamic ;NAI for outgoing calls ss7_calling_nai=dynamic ;NAI for incoming calls ss7_internationalprefix=00 ;international prefix value for incoming calls ss7_nationalprefix=0 ;national prefix value for incoming calls ss7_subscriberprefix= ;subscriber prefix value for incoming calls ss7_unknownprefix= ;unknown prefix value for incoming calls ss7_explictacm=yes ;ACM is send as soon as call enters the dial plan...may not accepted yet though linkset=1 ;arbitrary name for this set of channels pointcode=13323 ;the point code for this system...aka SPC adjpointcode=12650 ;the point code for the system that we are signaling to... aka APC defaultdpc=12650 ;the point code for the system that the CICs will be negotiated with...aka DPC networkindicator=international ;NI value for MTP3 cicbeginswith=1 ;the starting value of the CICs channel =>1-15 cicbeginswith=17 ;the starting value of the CICs channel =>17-31 ;the channels that are CICs sigchan=16 ;the signaling channel
;Sangoma A108 port 2 [slot:4 bus:5 span:2] <wanpipe2> switchtype=euroisdn context=tata group=1 echocancel=yes cicbeginswith=32 ;the starting value of the CICs channel =>32-46 cicbeginswith=48 ;the starting value of the CICs channel =>48-62 ;the channels that are CICs sigchan=47 ;the signaling channel
debian:~# ifconfig w1g1 w1g1 Link encap:Point-to-Point Protocol UP POINTOPOINT RUNNING NOARP MTU:8 Metric:1 RX packets:772814 errors:0 dropped:0 overruns:0 frame:0 TX packets:772814 errors:0 dropped:0 overruns:3 carrier:0 collisions:0 txqueuelen:100 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Interrupt:16 Memory:f8d00000-f8d01fff
debian:~# ifconfig w1g1 w1g1 Link encap:Point-to-Point Protocol UP POINTOPOINT RUNNING NOARP MTU:8 Metric:1 RX packets:774782 errors:0 dropped:0 overruns:0 frame:0 TX packets:774782 errors:0 dropped:0 overruns:3 carrier:0 collisions:0 txqueuelen:100 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Interrupt:16 Memory:f8d00000-f8d01fff
debian:~# ifconfig w1g1 w1g1 Link encap:Point-to-Point Protocol UP POINTOPOINT RUNNING NOARP MTU:8 Metric:1 RX packets:775351 errors:0 dropped:0 overruns:0 frame:0 TX packets:775351 errors:0 dropped:0 overruns:3 carrier:0 collisions:0 txqueuelen:100 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Interrupt:16 Memory:f8d00000-f8d01fff
debian:~# ifconfig w1g1 w1g1 Link encap:Point-to-Point Protocol UP POINTOPOINT RUNNING NOARP MTU:8 Metric:1 RX packets:775919 errors:0 dropped:0 overruns:0 frame:0 TX packets:775919 errors:0 dropped:0 overruns:3 carrier:0 collisions:0 txqueuelen:100 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Interrupt:16 Memory:f8d00000-f8d01fff
debian:~# ifconfig w1g1 w1g1 Link encap:Point-to-Point Protocol UP POINTOPOINT RUNNING NOARP MTU:8 Metric:1 RX packets:776478 errors:0 dropped:0 overruns:0 frame:0 TX packets:776478 errors:0 dropped:0 overruns:3 carrier:0 collisions:0 txqueuelen:100 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Interrupt:16 Memory:f8d00000-f8d01fff
debian:~# ifconfig w1g1 w1g1 Link encap:Point-to-Point Protocol UP POINTOPOINT RUNNING NOARP MTU:8 Metric:1 RX packets:777079 errors:0 dropped:0 overruns:0 frame:0 TX packets:777079 errors:0 dropped:0 overruns:3 carrier:0 collisions:0 txqueuelen:100 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Interrupt:16 Memory:f8d00000-f8d01fff
debian:~# ifconfig w1g1 w1g1 Link encap:Point-to-Point Protocol UP POINTOPOINT RUNNING NOARP MTU:8 Metric:1 RX packets:778134 errors:0 dropped:0 overruns:0 frame:0 TX packets:778134 errors:0 dropped:0 overruns:3 carrier:0 collisions:0 txqueuelen:100 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Interrupt:16 Memory:f8d00000-f8d01fff
debian:~# ifconfig w2g1 w2g1 Link encap:Point-to-Point Protocol UP POINTOPOINT RUNNING NOARP MTU:8 Metric:1 RX packets:792251 errors:0 dropped:0 overruns:0 frame:0 TX packets:792251 errors:0 dropped:0 overruns:1 carrier:0 collisions:0 txqueuelen:100 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Interrupt:16 Memory:f8d00000-f8d01fff
debian:~# ifconfig w2g1 w2g1 Link encap:Point-to-Point Protocol UP POINTOPOINT RUNNING NOARP MTU:8 Metric:1 RX packets:792715 errors:0 dropped:0 overruns:0 frame:0 TX packets:792715 errors:0 dropped:0 overruns:1 carrier:0 collisions:0 txqueuelen:100 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Interrupt:16 Memory:f8d00000-f8d01fff
debian:~# ifconfig w2g1 w2g1 Link encap:Point-to-Point Protocol UP POINTOPOINT RUNNING NOARP MTU:8 Metric:1 RX packets:793219 errors:0 dropped:0 overruns:0 frame:0 TX packets:793219 errors:0 dropped:0 overruns:1 carrier:0 collisions:0 txqueuelen:100 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Interrupt:16 Memory:f8d00000-f8d01fff
wanpipemon -i w2g1 -c Ta
***** w2g1: E1 Alarms (Framer) *****
ALOS: OFF | LOS: OFF RED: OFF | AIS: OFF LOF: OFF | RAI: OFF
***** w2g1: E1 Alarms (LIU) *****
Short Circuit: OFF Open Circuit: OFF Loss of Signal: OFF
***** w2g1: E1 Performance Monitoring Counters *****
Line Code Violation : 0 Far End Block Errors : 0 CRC4 Errors : 0 FAS Errors : 0
Rx Level : > -2.5db
debian:~# wanpipemon -i w1g1 -c Ta
***** w1g1: E1 Alarms (Framer) *****
ALOS: OFF | LOS: OFF RED: OFF | AIS: OFF LOF: OFF | RAI: OFF
***** w1g1: E1 Alarms (LIU) *****
Short Circuit: OFF Open Circuit: OFF Loss of Signal: OFF
***** w1g1: E1 Performance Monitoring Counters *****
Line Code Violation : 371 Far End Block Errors : 0 CRC4 Errors : 0 FAS Errors : 0
Rx Level : > -2.5db
Jan 3 20:33:34 debian kernel: [55441.172179] wanpipe1: Shutting Down! Jan 3 20:33:34 debian kernel: [55441.172179] wanpipe1: E1 Front End unconfigation! Jan 3 20:33:34 debian kernel: [55441.172179] wanpipe1: Unregister Wanpipe device from Zaptel! Jan 3 20:33:34 debian kernel: [55441.178246] wanpipe1: unregistering 'w1g1' Jan 3 20:33:34 debian kernel: [55441.248278] wanpipe1: TASKQ Not Running Jan 3 20:33:34 debian kernel: [55441.248281] wanpipe1: E1 Front End unconfigation! Jan 3 20:33:34 debian kernel: [55441.248314] wanpipe1: AFT communications disabled! (Dev Cnt: 1 Cause: Device Down) Jan 3 20:33:34 debian kernel: [55441.248335] wanpipe1: E1 Front End unconfigation! Jan 3 20:33:34 debian kernel: [55441.248373] wanpipe1: AFT communications disabled! (Dev Cnt: 1 Cause: Device Down) Jan 3 20:33:34 debian kernel: [55441.248415] wanpipe1: Global Chip Shutdown Usage=1 Jan 3 20:33:34 debian kernel: [55441.248419] wanpipe1: Global E1 Front End unconfigation! Jan 3 20:33:34 debian kernel: [55441.250485] wanpipe1: Master shutting down Jan 3 20:33:34 debian kernel: [55441.444571] wanpipe1: Starting WAN Setup Jan 3 20:33:34 debian kernel: [55441.444575] wanpipe1: Locating: A101/1D/A102/2D/4/4D/8 card, CPU A, PciSlot=4, PciBus=5 Jan 3 20:33:34 debian kernel: [55441.444579] wanpipe1: Found: A101/1D/A102/2D/4/4D/8 card, CPU A, PciSlot=4, PciBus=5, Port=0 Jan 3 20:33:34 debian kernel: [55441.444599] wanpipe1: AFT PCI memory at 0xD3200000 Jan 3 20:33:34 debian kernel: [55441.444600] wanpipe1: IRQ 16 allocated to the AFT PCI card Jan 3 20:33:34 debian kernel: [55441.444608] wanpipe1: Starting AFT 2/4/8 Hardware Init. Jan 3 20:33:34 debian kernel: [55441.444614] wanpipe1: Enabling front end link monitor Jan 3 20:33:34 debian kernel: [55441.444616] wanpipe1: Global Chip Configuration: used=1 Jan 3 20:33:34 debian kernel: [55441.448455] wanpipe1: Global E1 Front End configuration Jan 3 20:33:34 debian kernel: [55441.448455] wanpipe1: AFT Data Mux Bit Map: 0x01234567 Jan 3 20:33:34 debian kernel: [55441.448455] wanpipe1: Defaulting E1 Rx Sens. Gain= 43 db Jan 3 20:33:34 debian kernel: [55441.448455] wanpipe1: Configuring DS DS26528 E1 FE Jan 3 20:33:34 debian kernel: [55441.448455] wanpipe1: Port 1,HDB3,non-CRC4,120OH Jan 3 20:33:34 debian kernel: [55441.448455] wanpipe1: Clk Normal:0, Channels: FFFFFFFF Jan 3 20:33:34 debian kernel: [55441.448455] wanpipe1: Sig Mode CCS Jan 3 20:33:34 debian kernel: [55441.456490] wanpipe1: Rx Sensitivity Gain 43dB (default). Jan 3 20:33:34 debian kernel: [55441.457242] wanpipe1: Front end successful Jan 3 20:33:34 debian kernel: [55441.457469] wanpipe1: Front End Interface Ready 0x40000000 Jan 3 20:33:34 debian kernel: [55441.457473] wanpipe1: WARNING: No Echo Canceller channels are available! Jan 3 20:33:34 debian kernel: [55441.457494] wanpipe1: Configuring Device :wanpipe1 FrmVr=39 Jan 3 20:33:34 debian kernel: [55441.457495] wanpipe1: Global MTU = 1500 Jan 3 20:33:34 debian kernel: [55441.457496] wanpipe1: Global MRU = 1500 Jan 3 20:33:34 debian kernel: [55441.457497] wanpipe1: Data Mux Map = 0x01234567 Jan 3 20:33:34 debian kernel: [55441.457498] wanpipe1: Rx CRC Bytes = 0 Jan 3 20:33:34 debian kernel: [55441.457499] wanpipe1: Global TDM Int = Enabled Jan 3 20:33:34 debian kernel: [55441.457500] wanpipe1: Global TDM Ring = Enabled Jan 3 20:33:34 debian kernel: [55441.457501] wanpipe1: TDMV HW DTMF/FAX = Disabled/Disabled(0) Jan 3 20:33:34 debian kernel: [55441.457502] wanpipe1: TDMV Span = 1 : Enabled Jan 3 20:33:34 debian kernel: [55441.457503] wanpipe1: TDMV Dummy = Disabled Jan 3 20:33:34 debian kernel: [55441.457505] wanpipe1: RTP TAP = Disabled Jan 3 20:33:34 debian kernel: [55441.457540] wanpipe1: Configuring Interface: w1g1 Jan 3 20:33:34 debian kernel: [55441.457543] wanpipe1:w1g1: Running in TDM Voice Zaptel Mode. Jan 3 20:33:34 debian kernel: [55441.457547] wanpipe1: Fifo Level Map:0x01041040 Jan 3 20:33:34 debian kernel: [55441.457549] wanpipe1: MRU :8 Jan 3 20:33:34 debian kernel: [55441.457550] wanpipe1: MTU :8 Jan 3 20:33:34 debian kernel: [55441.457551] wanpipe1: HDLC Eng :Off (Transparent) | N/A Jan 3 20:33:34 debian kernel: [55441.457553] wanpipe1: Data Mux Ctrl :On Jan 3 20:33:34 debian kernel: [55441.457554] wanpipe1: Active Ch Map :0x00000002 Jan 3 20:33:34 debian kernel: [55441.457555] wanpipe1: First TSlot :1 Jan 3 20:33:34 debian kernel: [55441.457568] wanpipe1: DMA/Len/Chain/EC :4/1024/Off/Off Jan 3 20:33:34 debian kernel: [55441.457575] wanpipe1: Configuring Interface: w1g1 (log supress) Jan 3 20:33:34 debian kernel: [55441.457581] wanpipe1: Active Ch Map :0x00000004 Jan 3 20:33:34 debian kernel: [55441.457582] wanpipe1: First TSlot :2 Jan 3 20:33:34 debian kernel: [55441.457597] wanpipe1: Configuring Interface: w1g1 (log supress) Jan 3 20:33:34 debian kernel: [55441.457602] wanpipe1: Active Ch Map :0x00000008 Jan 3 20:33:34 debian kernel: [55441.457603] wanpipe1: First TSlot :3 Jan 3 20:33:34 debian kernel: [55441.457618] wanpipe1: Configuring Interface: w1g1 (log supress) Jan 3 20:33:34 debian kernel: [55441.457623] wanpipe1: Active Ch Map :0x00000010 Jan 3 20:33:34 debian kernel: [55441.457624] wanpipe1: First TSlot :4 Jan 3 20:33:34 debian kernel: [55441.457637] wanpipe1: Configuring Interface: w1g1 (log supress) Jan 3 20:33:34 debian kernel: [55441.457643] wanpipe1: Active Ch Map :0x00000020 Jan 3 20:33:34 debian kernel: [55441.457644] wanpipe1: First TSlot :5 Jan 3 20:33:34 debian kernel: [55441.457657] wanpipe1: Configuring Interface: w1g1 (log supress) Jan 3 20:33:34 debian kernel: [55441.457663] wanpipe1: Active Ch Map :0x00000040 Jan 3 20:33:34 debian kernel: [55441.457664] wanpipe1: First TSlot :6 Jan 3 20:33:34 debian kernel: [55441.457678] wanpipe1: Configuring Interface: w1g1 (log supress) Jan 3 20:33:34 debian kernel: [55441.457684] wanpipe1: Active Ch Map :0x00000080 Jan 3 20:33:34 debian kernel: [55441.457685] wanpipe1: First TSlot :7 Jan 3 20:33:34 debian kernel: [55441.457698] wanpipe1: Configuring Interface: w1g1 (log supress) Jan 3 20:33:34 debian kernel: [55441.457705] wanpipe1: Active Ch Map :0x00000100 Jan 3 20:33:34 debian kernel: [55441.457706] wanpipe1: First TSlot :8 Jan 3 20:33:34 debian kernel: [55441.457719] wanpipe1: Configuring Interface: w1g1 (log supress) Jan 3 20:33:34 debian kernel: [55441.457725] wanpipe1: Active Ch Map :0x00000200 Jan 3 20:33:34 debian kernel: [55441.457726] wanpipe1: First TSlot :9 Jan 3 20:33:34 debian kernel: [55441.457740] wanpipe1: Configuring Interface: w1g1 (log supress) Jan 3 20:33:34 debian kernel: [55441.457746] wanpipe1: Active Ch Map :0x00000400 Jan 3 20:33:34 debian kernel: [55441.457747] wanpipe1: First TSlot :10 Jan 3 20:33:34 debian kernel: [55441.457760] wanpipe1: Configuring Interface: w1g1 (log supress) Jan 3 20:33:34 debian kernel: [55441.457765] wanpipe1: Active Ch Map :0x00000800 Jan 3 20:33:34 debian kernel: [55441.457766] wanpipe1: First TSlot :11 Jan 3 20:33:34 debian kernel: [55441.457781] wanpipe1: Configuring Interface: w1g1 (log supress) Jan 3 20:33:34 debian kernel: [55441.457786] wanpipe1: Active Ch Map :0x00001000 Jan 3 20:33:34 debian kernel: [55441.457787] wanpipe1: First TSlot :12 Jan 3 20:33:34 debian kernel: [55441.457801] wanpipe1: Configuring Interface: w1g1 (log supress) Jan 3 20:33:34 debian kernel: [55441.457807] wanpipe1: Active Ch Map :0x00002000 Jan 3 20:33:34 debian kernel: [55441.457808] wanpipe1: First TSlot :13 Jan 3 20:33:34 debian kernel: [55441.457822] wanpipe1: Configuring Interface: w1g1 (log supress) Jan 3 20:33:34 debian kernel: [55441.457828] wanpipe1: Active Ch Map :0x00004000 Jan 3 20:33:34 debian kernel: [55441.457829] wanpipe1: First TSlot :14 Jan 3 20:33:34 debian kernel: [55441.457842] wanpipe1: Configuring Interface: w1g1 (log supress) Jan 3 20:33:34 debian kernel: [55441.457848] wanpipe1: Active Ch Map :0x00008000 Jan 3 20:33:34 debian kernel: [55441.457849] wanpipe1: First TSlot :15 Jan 3 20:33:34 debian kernel: [55441.457862] wanpipe1: Configuring Interface: w1g1 Jan 3 20:33:34 debian kernel: [55441.457864] wanpipe1:w1g1: Running in TDM DCHAN Voice Zaptel Mode. Jan 3 20:33:34 debian kernel: [55441.457866] wanpipe1: MRU :1500 Jan 3 20:33:34 debian kernel: [55441.457867] wanpipe1: MTU :1500 Jan 3 20:33:34 debian kernel: [55441.457868] wanpipe1: HDLC Eng :On | N/A Jan 3 20:33:34 debian kernel: [55441.457869] wanpipe1: Data Mux Ctrl :Off Jan 3 20:33:34 debian kernel: [55441.457870] wanpipe1: Active Ch Map :0x00010000 Jan 3 20:33:34 debian kernel: [55441.457871] wanpipe1: First TSlot :16 Jan 3 20:33:34 debian kernel: [55441.457881] wanpipe1: DMA/Len/Chain/EC :65/4096/On/Off Jan 3 20:33:34 debian kernel: [55441.457905] wanpipe1: Configuring Interface: w1g1 (log supress) Jan 3 20:33:34 debian kernel: [55441.457910] wanpipe1: Active Ch Map :0x00020000 Jan 3 20:33:34 debian kernel: [55441.457911] wanpipe1: First TSlot :17 Jan 3 20:33:34 debian kernel: [55441.457925] wanpipe1: Configuring Interface: w1g1 (log supress) Jan 3 20:33:34 debian kernel: [55441.457931] wanpipe1: Active Ch Map :0x00040000 Jan 3 20:33:34 debian kernel: [55441.457932] wanpipe1: First TSlot :18 Jan 3 20:33:34 debian kernel: [55441.457945] wanpipe1: Configuring Interface: w1g1 (log supress) Jan 3 20:33:34 debian kernel: [55441.457951] wanpipe1: Active Ch Map :0x00080000 Jan 3 20:33:34 debian kernel: [55441.457952] wanpipe1: First TSlot :19 Jan 3 20:33:34 debian kernel: [55441.457967] wanpipe1: Configuring Interface: w1g1 (log supress) Jan 3 20:33:34 debian kernel: [55441.457973] wanpipe1: Active Ch Map :0x00100000 Jan 3 20:33:34 debian kernel: [55441.457974] wanpipe1: First TSlot :20 Jan 3 20:33:34 debian kernel: [55441.457987] wanpipe1: Configuring Interface: w1g1 (log supress) Jan 3 20:33:34 debian kernel: [55441.457993] wanpipe1: Active Ch Map :0x00200000 Jan 3 20:33:34 debian kernel: [55441.457994] wanpipe1: First TSlot :21 Jan 3 20:33:34 debian kernel: [55441.458009] wanpipe1: Configuring Interface: w1g1 (log supress) Jan 3 20:33:34 debian kernel: [55441.458015] wanpipe1: Active Ch Map :0x00400000 Jan 3 20:33:34 debian kernel: [55441.458016] wanpipe1: First TSlot :22 Jan 3 20:33:34 debian kernel: [55441.458030] wanpipe1: Configuring Interface: w1g1 (log supress) Jan 3 20:33:34 debian kernel: [55441.458036] wanpipe1: Active Ch Map :0x00800000 Jan 3 20:33:34 debian kernel: [55441.458037] wanpipe1: First TSlot :23 Jan 3 20:33:34 debian kernel: [55441.458051] wanpipe1: Configuring Interface: w1g1 (log supress) Jan 3 20:33:34 debian kernel: [55441.458057] wanpipe1: Active Ch Map :0x01000000 Jan 3 20:33:34 debian kernel: [55441.458058] wanpipe1: First TSlot :24 Jan 3 20:33:34 debian kernel: [55441.458072] wanpipe1: Configuring Interface: w1g1 (log supress) Jan 3 20:33:34 debian kernel: [55441.458078] wanpipe1: Active Ch Map :0x02000000 Jan 3 20:33:34 debian kernel: [55441.458079] wanpipe1: First TSlot :25 Jan 3 20:33:34 debian kernel: [55441.458094] wanpipe1: Configuring Interface: w1g1 (log supress) Jan 3 20:33:34 debian kernel: [55441.458100] wanpipe1: Active Ch Map :0x04000000 Jan 3 20:33:34 debian kernel: [55441.458101] wanpipe1: First TSlot :26 Jan 3 20:33:34 debian kernel: [55441.458116] wanpipe1: Configuring Interface: w1g1 (log supress) Jan 3 20:33:34 debian kernel: [55441.458122] wanpipe1: Active Ch Map :0x08000000 Jan 3 20:33:34 debian kernel: [55441.458123] wanpipe1: First TSlot :27 Jan 3 20:33:34 debian kernel: [55441.458137] wanpipe1: Configuring Interface: w1g1 (log supress) Jan 3 20:33:34 debian kernel: [55441.458143] wanpipe1: Active Ch Map :0x10000000 Jan 3 20:33:34 debian kernel: [55441.458144] wanpipe1: First TSlot :28 Jan 3 20:33:34 debian kernel: [55441.458160] wanpipe1: Configuring Interface: w1g1 (log supress) Jan 3 20:33:34 debian kernel: [55441.458166] wanpipe1: Active Ch Map :0x20000000 Jan 3 20:33:34 debian kernel: [55441.458167] wanpipe1: First TSlot :29 Jan 3 20:33:34 debian kernel: [55441.458181] wanpipe1: Configuring Interface: w1g1 (log supress) Jan 3 20:33:34 debian kernel: [55441.458187] wanpipe1: Active Ch Map :0x40000000 Jan 3 20:33:34 debian kernel: [55441.458188] wanpipe1: First TSlot :30 Jan 3 20:33:34 debian kernel: [55441.458202] wanpipe1: Configuring Interface: w1g1 (log supress) Jan 3 20:33:34 debian kernel: [55441.458205] wanpipe1: Configuring TDMV Master dev w1g1 Jan 3 20:33:34 debian kernel: [55441.458209] wanpipe1: Active Ch Map :0x80000000 Jan 3 20:33:34 debian kernel: [55441.458210] wanpipe1: First TSlot :31 Jan 3 20:33:34 debian kernel: [55441.458226] wanpipe1: Enable Zaptel HW DCHAN interface Jan 3 20:33:34 debian kernel: [55441.458462] wanpipe1: Wanpipe device is registered to Zaptel span # 1! Jan 3 20:33:34 debian kernel: [55441.458760] wanpipe1: TDM Free Run Timing Enabled 1 ms Jan 3 20:33:34 debian kernel: [55441.464708] wanpipe1: Wanpipe Front End Interrupt Restart Timeout Jan 3 20:33:40 debian kernel: [55450.402880] wanpipe1: E1 connected! Jan 3 20:33:40 debian kernel: [55450.407421] wanpipe1: AFT communications enabled! Jan 3 20:33:40 debian kernel: [55450.407421] wanpipe1: AFT Global TDM Intr Jan 3 20:33:40 debian kernel: [55450.409902] wanpipe1: Global TDM Ring Resync Jan 3 20:33:41 debian kernel: [55452.785733] wanpipe1: Enable E1 CCS Signalling mode!
debian*CLI> core show version Asterisk 1.6.2.0 built by root @ debian on a i686 running Linux on 2011-01-03 08:57:50 UTC
debian*CLI> ss7 show linkset 1 SS7 linkset 1 status: Down
debian*CLI> ss7 set debug off linkset 1 Enabled debugging on linkset 1 Len = 4 [ ff ff 01 03 ] FSN: 127 FIB 1 BSN: 127 BIB 1 <[0] LSSU SIOS
Link state change: NOTALIGNED -> NOTALIGNED Len = 4 [ ff ff 01 00 ] FSN: 127 FIB 1 BSN: 127 BIB 1 <[0] LSSU SIO
Link state change: NOTALIGNED -> ALIGNED Len = 4 [ ff ff 01 02 ] FSN: 127 FIB 1 BSN: 127 BIB 1
[0] LSSU SIE
Link state change: ALIGNED -> IDLE Link state change: IDLE -> NOTALIGNED Len = 4 [ ff ff 01 00 ] FSN: 127 FIB 1 BSN: 127 BIB 1
[0] LSSU SIO
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- wasim h. baig | principal consultant | convergence pk | +92 30 0850 8070 | peace be upon you ...
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
participants (1)
-
Anita Hall