New subject: Issue with mod_verto enabled inside modules.conf.xml and originate not working correctly

20 May 2016

      To FreeSWITCH Users,

I thought I would pass this on since I spent all day yesterday trying to track this issue down.

See below for my setup of FreeSWITCH version 1.6.8 (this problem also happens on 1.6.5 since that is why I upgraded to see if the problem was fixed or not).

I can reproduce this issue on FreeSWITCH 1.6.5 and 1.6.8 100% of the time.

Basically if mod_verto is not commented out inside the modules.conf.xml file then the "originate" does not function as it is supposed to.

See at the bottom of this message my test Lua script (visytel-test-out.lua).

I setup a simple SIP phone (Bria) to register with FreeSWITCH under user 1000 (sofia status profile internal reg checked out OK) then called the originate command:

originate {ignore_early_media=true,call_timeout=15,return_ring_ready=true}user/1000 00000000

When mod_verto is commented out and FreeSWITCH is started everything works OK (except session:hangupCause() always returns NONE - but I can work around this)
When mod_verto is not commented out and FreeSWITCH is started originate gets stuck and never starts the Lua script (unless answered) despite return_ring_ready=true.

Luckily I currently do not need video on my FreeSWITCH installations so I can happily comment out mod_verto, however this may not be the case in the future.

Kind Regards,

Andrew Keil
Visytel Pty Ltd

New setup of FreeSWITCH 1.6.8 on up-to-date CentOS 6.7

yum -y install epel-release

yum -y install git gcc-c++ autoconf automake libtool wget python ncurses-devel zlib-devel libjpeg-devel openssl-devel sqlite-devel libcurl-devel libxml2-devel libidn-devel readline-devel
                These should be already installed and up-to-date
yum -y install e2fsprogs-devel pcre-devel speex-devel ldns-devel libedit-devel libyuv-devel opus-devel libvpx-devel unbound-devel libuuid-devel libsndfile-devel sox
                These should install
                Note: No packages for: libvpx2*, libdb4* (so mod_vpx & mod_fsv will not be supported)

cd /usr/local/src
git clone -b v1.6 https://freeswitch.org/stash/scm/fs/freeswitch.git
cd /usr/local/src/freeswitch
./bootstrap.sh
vi modules.conf
    Comment out (ie. place '#' infront):
                                mod_fsv
                                mod_h26x
                Save and close (<Esc> :wq!)

./configure --disable-libvpx --disable-libyuv

yum install yasm-devel  {This is extra from the original yum install pre-requisites}

make
make install
make cd-sounds-install
make cd-moh-install
cd /usr/local/freeswitch/conf
vi vars.xml
    Change:  <X-PRE-PROCESS cmd="set" data="default_password=1234"/> {!!set it to something different!!}
    Save and close (<Esc> :wq!)
cd /usr/local/freeswitch/conf/autoload_configs
vi modules.conf.xml
    comment out (ie. place '<!--' infront and '-->' at the end):
                                mod_fsv
                Save and close (<Esc> :wq!)
cd /usr/local/freeswitch/bin
./freeswitch -nonat -nonatmap

version
FreeSWITCH Version 1.6.8+git~20160505T153832Z~99de0ad502~64bit (git 99de0ad 2016-05-05 15:38:32Z 64bit)
... to exit from FreeSWITCH console

Here is my test Lua script which was placed inside scripts/visytel-test-out.lua:

local trace_string

-- Script tested by using originate: originate {ignore_early_media=true,call_timeout=15,return_ring_ready=true}user/1000 00000000

--[[

Dialplan inside conf/dialplan/default/00_visytel_out.xml:

<include>
                <extension name="visytel_out">
                                <condition field="destination_number" expression="00000000">
                                                <action application="lua" data="visytel-test-out.lua"/>
                                </condition>
                </extension>
</include>

]]--

-- Trace some channel variables here
trace_string = session:getVariable("uuid")
freeswitch.consoleLog("INFO", trace_string)
trace_string = session:getVariable("destination_number")
freeswitch.consoleLog("INFO", trace_string)
trace_string = session:getVariable("ani")
freeswitch.consoleLog("INFO", trace_string)
trace_string = session:getVariable("direction")
freeswitch.consoleLog("INFO", trace_string)
trace_string = session:getVariable("channel_name")
freeswitch.consoleLog("INFO", trace_string)

-- waitForAnswer here
freeswitch.consoleLog("INFO", "Prior to session.waitForAnswer()")
session:waitForAnswer(session)
freeswitch.consoleLog("INFO", "After session.waitForAnswer()")
-- Get Hangup Cause {this does not seem to work}
freeswitch.consoleLog("INFO", session:hangupCause())  -- This seems to be always a value of NONE so not much use

-- Handle whether outbound call was ANSWERED or not here
if (session:getState() ~= "CS_HANGUP") then
                freeswitch.consoleLog("INFO", "OUTBOUND ANSWERED")
                session:sleep(2000)
                session:hangup() -- Just HANGUP for now
else
                freeswitch.consoleLog("INFO", "OUTBOUND FAILED")
                session:hangup()
end

Issue with mod_verto enabled inside modules.conf.xml and originate not working correctly

Andrew Keil

Ken Rice

Andrew Keil

tags

participants (2)