ftmod_sangoma_isdn: dialtone in overlap dialing
Dear friends, I would want to know how to configure ftmod_sangoma_isdn to send dialtone. My setup is as follows, Telcom <---> Freeswitch <---> PBX <----> Extensions 1..n My pbx has got overlap dial enabled and it is configured to seize the trunk when it receives '0' from extensions. When I connect the PRI to my pbx, and when '0' is dialled from an extension, my pbx seizes the trunk and I'm able to hear dialtone. But, when I connect the PRI to freeswitch and connect freeswitch to pbx and when '0' is dialled from an extension, I'm not hearing dialtone. Whether some configuration is available to ask ftmod_sangoma_isdn to send dialtone before started to collect digits in overlap mode? or any other way to give dialtone?? -- Regards, Nagalenoj H.
On Wed, Dec 29, 2010 at 10:15 AM, Nagalenoj H. <nagalenoj@gmail.com> wrote:
Dear friends, I would want to know how to configure ftmod_sangoma_isdn to send dialtone.
My setup is as follows,
Telcom <---> Freeswitch <---> PBX <----> Extensions 1..n
My pbx has got overlap dial enabled and it is configured to seize the trunk when it receives '0' from extensions.
When I connect the PRI to my pbx, and when '0' is dialled from an extension, my pbx seizes the trunk and I'm able to hear dialtone. But, when I connect the PRI to freeswitch and connect freeswitch to pbx and when '0' is dialled from an extension, I'm not hearing dialtone.
Whether some configuration is available to ask ftmod_sangoma_isdn to send dialtone before started to collect digits in overlap mode? or any other way to give dialtone??
Not supported with the current code. Some changes need to be performed in the ftmod_sangoma_isdn module to do this. I'd recommend you to open a jira report to ask for this feature, as I know is something is needed and would like to keep track of it and put it in our next development cycle. Moises Silva Senior Software Engineer Sangoma Technologies Inc. | 100 Renfrew Drive, Suite 100, Markham ON L3R 9R6 Canada t. 1 905 474 1990 x128 | e. moy@sangoma.com
http://jira.freeswitch.org/browse/OPENZAP-134 Thanks. On Thu, Dec 30, 2010 at 1:39 AM, Moises Silva <moises.silva@gmail.com>wrote:
On Wed, Dec 29, 2010 at 10:15 AM, Nagalenoj H. <nagalenoj@gmail.com>wrote:
Dear friends, I would want to know how to configure ftmod_sangoma_isdn to send dialtone.
My setup is as follows,
Telcom <---> Freeswitch <---> PBX <----> Extensions 1..n
My pbx has got overlap dial enabled and it is configured to seize the trunk when it receives '0' from extensions.
When I connect the PRI to my pbx, and when '0' is dialled from an extension, my pbx seizes the trunk and I'm able to hear dialtone. But, when I connect the PRI to freeswitch and connect freeswitch to pbx and when '0' is dialled from an extension, I'm not hearing dialtone.
Whether some configuration is available to ask ftmod_sangoma_isdn to send dialtone before started to collect digits in overlap mode? or any other way to give dialtone??
Not supported with the current code. Some changes need to be performed in the ftmod_sangoma_isdn module to do this. I'd recommend you to open a jira report to ask for this feature, as I know is something is needed and would like to keep track of it and put it in our next development cycle.
Moises Silva Senior Software Engineer Sangoma Technologies Inc. | 100 Renfrew Drive, Suite 100, Markham ON L3R 9R6 Canada t. 1 905 474 1990 x128 | e. moy@sangoma.com
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- Regards, Nagalenoj H.
participants (2)
-
Moises Silva
-
Nagalenoj H.