So this is starting to get complicated and it looks like I might have to write some lua to do this... So, say I want to bridge a freephone number to both a landline and a mobile in parallel. All 3 potential legs need different call rates, only 2 will be used when the call is picked up, of course, and I ideally need the CDR and cost for each leg separate. Here's an idea of what I have so far: <action application="set" data="nibble_rate=0.01" /> <action application="bridge" data="[nibble_rate=0.01]sofia/gateway/x/landline,[nibble_rate=0.06]sofia/gateway/x/mobile" /> This doesn't work, and neither does setting the variables nolocal. Can this be done in this way? I can probably work around this by exporting the incoming rate as nolocal and the outgoing rate on the incoming channel. Confusing but might actually work. -- *Andrew Cassidy BSc (Hons) MBCS SSCA* Managing Director *T <info@cassidywebservices.co.uk> *03300 100 960 *F <info@cassidywebservices.co.uk> *03300 100 961 *E <info@cassidywebservices.co.uk> *andrew@cassidywebservices.co.uk *W <info@cassidywebservices.co.uk> *www.cassidywebservices.co.uk
Did you set nibble account on the b leg? Both vars are required I believe. <variable name="nibble_rate" value="0.03"/> <variable name="nibble_account" value="18238"/> -Avi On Dec 1, 2013 12:11 AM, "Andrew Cassidy" <andrew@cassidywebservices.co.uk> wrote:
So this is starting to get complicated and it looks like I might have to write some lua to do this...
So, say I want to bridge a freephone number to both a landline and a mobile in parallel. All 3 potential legs need different call rates, only 2 will be used when the call is picked up, of course, and I ideally need the CDR and cost for each leg separate. Here's an idea of what I have so far:
<action application="set" data="nibble_rate=0.01" /> <action application="bridge" data="[nibble_rate=0.01]sofia/gateway/x/landline,[nibble_rate=0.06]sofia/gateway/x/mobile" />
This doesn't work, and neither does setting the variables nolocal.
Can this be done in this way?
I can probably work around this by exporting the incoming rate as nolocal and the outgoing rate on the incoming channel. Confusing but might actually work.
-- *Andrew Cassidy BSc (Hons) MBCS SSCA* Managing Director
*T <info@cassidywebservices.co.uk> *03300 100 960 *F <info@cassidywebservices.co.uk> *03300 100 961 *E <info@cassidywebservices.co.uk> *andrew@cassidywebservices.co.uk *W <info@cassidywebservices.co.uk> *www.cassidywebservices.co.uk
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
Hi Avi, I can set different rates on A and B fine normally but the B-leg rate needs to be different depending on which of the two endpoints picks up the call, which is what makes things difficult and why I tried the square bracket notation. On 1 December 2013 03:48, Avi Marcus <avi@avimarcus.net> wrote:
Did you set nibble account on the b leg? Both vars are required I believe.
<variable name="nibble_rate" value="0.03"/> <variable name="nibble_account" value="18238"/>
-Avi On Dec 1, 2013 12:11 AM, "Andrew Cassidy" <andrew@cassidywebservices.co.uk> wrote:
So this is starting to get complicated and it looks like I might have to write some lua to do this...
So, say I want to bridge a freephone number to both a landline and a mobile in parallel. All 3 potential legs need different call rates, only 2 will be used when the call is picked up, of course, and I ideally need the CDR and cost for each leg separate. Here's an idea of what I have so far:
<action application="set" data="nibble_rate=0.01" /> <action application="bridge" data="[nibble_rate=0.01]sofia/gateway/x/landline,[nibble_rate=0.06]sofia/gateway/x/mobile" />
This doesn't work, and neither does setting the variables nolocal.
Can this be done in this way?
I can probably work around this by exporting the incoming rate as nolocal and the outgoing rate on the incoming channel. Confusing but might actually work.
-- *Andrew Cassidy BSc (Hons) MBCS SSCA* Managing Director
*T <info@cassidywebservices.co.uk> *03300 100 960 *F <info@cassidywebservices.co.uk> *03300 100 961 *E <info@cassidywebservices.co.uk> *andrew@cassidywebservices.co.uk *W <info@cassidywebservices.co.uk> *www.cassidywebservices.co.uk
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- *Andrew Cassidy BSc (Hons) MBCS SSCA* Managing Director *T <info@cassidywebservices.co.uk> *03300 100 960 *F <info@cassidywebservices.co.uk> *03300 100 961 *E <info@cassidywebservices.co.uk> *andrew@cassidywebservices.co.uk *W <info@cassidywebservices.co.uk> *www.cassidywebservices.co.uk
That's what the brackets are for to set the B leg. how do you know this isn't working? Did you set the account for the b leg? -Avi On Dec 1, 2013 10:30 PM, "Andrew Cassidy" <andrew@cassidywebservices.co.uk> wrote:
Hi Avi,
I can set different rates on A and B fine normally but the B-leg rate needs to be different depending on which of the two endpoints picks up the call, which is what makes things difficult and why I tried the square bracket notation.
On 1 December 2013 03:48, Avi Marcus <avi@avimarcus.net> wrote:
Did you set nibble account on the b leg? Both vars are required I believe.
<variable name="nibble_rate" value="0.03"/> <variable name="nibble_account" value="18238"/>
-Avi On Dec 1, 2013 12:11 AM, "Andrew Cassidy" < andrew@cassidywebservices.co.uk> wrote:
So this is starting to get complicated and it looks like I might have to write some lua to do this...
So, say I want to bridge a freephone number to both a landline and a mobile in parallel. All 3 potential legs need different call rates, only 2 will be used when the call is picked up, of course, and I ideally need the CDR and cost for each leg separate. Here's an idea of what I have so far:
<action application="set" data="nibble_rate=0.01" /> <action application="bridge" data="[nibble_rate=0.01]sofia/gateway/x/landline,[nibble_rate=0.06]sofia/gateway/x/mobile" />
This doesn't work, and neither does setting the variables nolocal.
Can this be done in this way?
I can probably work around this by exporting the incoming rate as nolocal and the outgoing rate on the incoming channel. Confusing but might actually work.
-- *Andrew Cassidy BSc (Hons) MBCS SSCA* Managing Director
*T <info@cassidywebservices.co.uk> *03300 100 960 *F <info@cassidywebservices.co.uk> *03300 100 961 *E <info@cassidywebservices.co.uk> *andrew@cassidywebservices.co.uk *W <info@cassidywebservices.co.uk> *www.cassidywebservices.co.uk
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- *Andrew Cassidy BSc (Hons) MBCS SSCA* Managing Director
*T <info@cassidywebservices.co.uk> *03300 100 960 *F <info@cassidywebservices.co.uk> *03300 100 961 *E <info@cassidywebservices.co.uk> *andrew@cassidywebservices.co.uk *W <info@cassidywebservices.co.uk> *www.cassidywebservices.co.uk
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
account is set on an earlier export, so accumed it carried across. I make the assumption that it's not working based on the fact that the log only shows one "billing $x.xx for session x" entry. I can try moving the account code into the square brackets. On 1 December 2013 21:22, Avi Marcus <avi@avimarcus.net> wrote:
That's what the brackets are for to set the B leg. how do you know this isn't working? Did you set the account for the b leg?
-Avi On Dec 1, 2013 10:30 PM, "Andrew Cassidy" <andrew@cassidywebservices.co.uk> wrote:
Hi Avi,
I can set different rates on A and B fine normally but the B-leg rate needs to be different depending on which of the two endpoints picks up the call, which is what makes things difficult and why I tried the square bracket notation.
On 1 December 2013 03:48, Avi Marcus <avi@avimarcus.net> wrote:
Did you set nibble account on the b leg? Both vars are required I believe.
<variable name="nibble_rate" value="0.03"/> <variable name="nibble_account" value="18238"/>
-Avi On Dec 1, 2013 12:11 AM, "Andrew Cassidy" < andrew@cassidywebservices.co.uk> wrote:
So this is starting to get complicated and it looks like I might have to write some lua to do this...
So, say I want to bridge a freephone number to both a landline and a mobile in parallel. All 3 potential legs need different call rates, only 2 will be used when the call is picked up, of course, and I ideally need the CDR and cost for each leg separate. Here's an idea of what I have so far:
<action application="set" data="nibble_rate=0.01" /> <action application="bridge" data="[nibble_rate=0.01]sofia/gateway/x/landline,[nibble_rate=0.06]sofia/gateway/x/mobile" />
This doesn't work, and neither does setting the variables nolocal.
Can this be done in this way?
I can probably work around this by exporting the incoming rate as nolocal and the outgoing rate on the incoming channel. Confusing but might actually work.
-- *Andrew Cassidy BSc (Hons) MBCS SSCA* Managing Director
*T <info@cassidywebservices.co.uk> *03300 100 960 *F <info@cassidywebservices.co.uk> *03300 100 961 *E <info@cassidywebservices.co.uk> *andrew@cassidywebservices.co.uk *W <info@cassidywebservices.co.uk> *www.cassidywebservices.co.uk
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE: http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- *Andrew Cassidy BSc (Hons) MBCS SSCA* Managing Director
*T <info@cassidywebservices.co.uk> *03300 100 960 *F <info@cassidywebservices.co.uk> *03300 100 961 *E <info@cassidywebservices.co.uk> *andrew@cassidywebservices.co.uk *W <info@cassidywebservices.co.uk> *www.cassidywebservices.co.uk
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- *Andrew Cassidy BSc (Hons) MBCS SSCA* Managing Director *T <info@cassidywebservices.co.uk> *03300 100 960 *F <info@cassidywebservices.co.uk> *03300 100 961 *E <info@cassidywebservices.co.uk> *andrew@cassidywebservices.co.uk *W <info@cassidywebservices.co.uk> *www.cassidywebservices.co.uk
Well, you can check the b leg CDR to see if nibble_account is set. -Avi On Dec 2, 2013 11:29 AM, "Andrew Cassidy" <andrew@cassidywebservices.co.uk> wrote:
account is set on an earlier export, so accumed it carried across. I make the assumption that it's not working based on the fact that the log only shows one "billing $x.xx for session x" entry.
I can try moving the account code into the square brackets.
On 1 December 2013 21:22, Avi Marcus <avi@avimarcus.net> wrote:
That's what the brackets are for to set the B leg. how do you know this isn't working? Did you set the account for the b leg?
-Avi On Dec 1, 2013 10:30 PM, "Andrew Cassidy" < andrew@cassidywebservices.co.uk> wrote:
Hi Avi,
I can set different rates on A and B fine normally but the B-leg rate needs to be different depending on which of the two endpoints picks up the call, which is what makes things difficult and why I tried the square bracket notation.
On 1 December 2013 03:48, Avi Marcus <avi@avimarcus.net> wrote:
Did you set nibble account on the b leg? Both vars are required I believe.
<variable name="nibble_rate" value="0.03"/> <variable name="nibble_account" value="18238"/>
-Avi On Dec 1, 2013 12:11 AM, "Andrew Cassidy" < andrew@cassidywebservices.co.uk> wrote:
So this is starting to get complicated and it looks like I might have to write some lua to do this...
So, say I want to bridge a freephone number to both a landline and a mobile in parallel. All 3 potential legs need different call rates, only 2 will be used when the call is picked up, of course, and I ideally need the CDR and cost for each leg separate. Here's an idea of what I have so far:
<action application="set" data="nibble_rate=0.01" /> <action application="bridge" data="[nibble_rate=0.01]sofia/gateway/x/landline,[nibble_rate=0.06]sofia/gateway/x/mobile" />
This doesn't work, and neither does setting the variables nolocal.
Can this be done in this way?
I can probably work around this by exporting the incoming rate as nolocal and the outgoing rate on the incoming channel. Confusing but might actually work.
-- *Andrew Cassidy BSc (Hons) MBCS SSCA* Managing Director
*T <info@cassidywebservices.co.uk> *03300 100 960 *F <info@cassidywebservices.co.uk> *03300 100 961 *E <info@cassidywebservices.co.uk> *andrew@cassidywebservices.co.uk *W <info@cassidywebservices.co.uk> *www.cassidywebservices.co.uk
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE: http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE: http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- *Andrew Cassidy BSc (Hons) MBCS SSCA* Managing Director
*T <info@cassidywebservices.co.uk> *03300 100 960 *F <info@cassidywebservices.co.uk> *03300 100 961 *E <info@cassidywebservices.co.uk> *andrew@cassidywebservices.co.uk *W <info@cassidywebservices.co.uk> *www.cassidywebservices.co.uk
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- *Andrew Cassidy BSc (Hons) MBCS SSCA* Managing Director
*T <info@cassidywebservices.co.uk> *03300 100 960 *F <info@cassidywebservices.co.uk> *03300 100 961 *E <info@cassidywebservices.co.uk> *andrew@cassidywebservices.co.uk *W <info@cassidywebservices.co.uk> *www.cassidywebservices.co.uk
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
Hi Avi, I wibbled the variables a bit and it seems to work now. Haven't got a clue what exaclty sorted it but don't really want to touch it now it works! On 2 December 2013 10:11, Avi Marcus <avi@avimarcus.net> wrote:
Well, you can check the b leg CDR to see if nibble_account is set.
-Avi On Dec 2, 2013 11:29 AM, "Andrew Cassidy" <andrew@cassidywebservices.co.uk> wrote:
account is set on an earlier export, so accumed it carried across. I make the assumption that it's not working based on the fact that the log only shows one "billing $x.xx for session x" entry.
I can try moving the account code into the square brackets.
On 1 December 2013 21:22, Avi Marcus <avi@avimarcus.net> wrote:
That's what the brackets are for to set the B leg. how do you know this isn't working? Did you set the account for the b leg?
-Avi On Dec 1, 2013 10:30 PM, "Andrew Cassidy" < andrew@cassidywebservices.co.uk> wrote:
Hi Avi,
I can set different rates on A and B fine normally but the B-leg rate needs to be different depending on which of the two endpoints picks up the call, which is what makes things difficult and why I tried the square bracket notation.
On 1 December 2013 03:48, Avi Marcus <avi@avimarcus.net> wrote:
Did you set nibble account on the b leg? Both vars are required I believe.
<variable name="nibble_rate" value="0.03"/> <variable name="nibble_account" value="18238"/>
-Avi On Dec 1, 2013 12:11 AM, "Andrew Cassidy" < andrew@cassidywebservices.co.uk> wrote:
So this is starting to get complicated and it looks like I might have to write some lua to do this...
So, say I want to bridge a freephone number to both a landline and a mobile in parallel. All 3 potential legs need different call rates, only 2 will be used when the call is picked up, of course, and I ideally need the CDR and cost for each leg separate. Here's an idea of what I have so far:
<action application="set" data="nibble_rate=0.01" /> <action application="bridge" data="[nibble_rate=0.01]sofia/gateway/x/landline,[nibble_rate=0.06]sofia/gateway/x/mobile" />
This doesn't work, and neither does setting the variables nolocal.
Can this be done in this way?
I can probably work around this by exporting the incoming rate as nolocal and the outgoing rate on the incoming channel. Confusing but might actually work.
-- *Andrew Cassidy BSc (Hons) MBCS SSCA* Managing Director
*T <info@cassidywebservices.co.uk> *03300 100 960 *F <info@cassidywebservices.co.uk> *03300 100 961 *E <info@cassidywebservices.co.uk> *andrew@cassidywebservices.co.uk *W <info@cassidywebservices.co.uk> *www.cassidywebservices.co.uk
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE: http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE: http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- *Andrew Cassidy BSc (Hons) MBCS SSCA* Managing Director
*T <info@cassidywebservices.co.uk> *03300 100 960 *F <info@cassidywebservices.co.uk> *03300 100 961 *E <info@cassidywebservices.co.uk> *andrew@cassidywebservices.co.uk *W <info@cassidywebservices.co.uk> *www.cassidywebservices.co.uk
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE: http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- *Andrew Cassidy BSc (Hons) MBCS SSCA* Managing Director
*T <info@cassidywebservices.co.uk> *03300 100 960 *F <info@cassidywebservices.co.uk> *03300 100 961 *E <info@cassidywebservices.co.uk> *andrew@cassidywebservices.co.uk *W <info@cassidywebservices.co.uk> *www.cassidywebservices.co.uk
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- *Andrew Cassidy BSc (Hons) MBCS SSCA* Managing Director *T <info@cassidywebservices.co.uk> *03300 100 960 *F <info@cassidywebservices.co.uk> *03300 100 961 *E <info@cassidywebservices.co.uk> *andrew@cassidywebservices.co.uk *W <info@cassidywebservices.co.uk> *www.cassidywebservices.co.uk
participants (2)
-
Andrew Cassidy
-
Avi Marcus