Hello fs_users. New to the list and to fs We're migrating to fs. (1) Is an Atom(TM) CPU D525 @ 1.80GHz (Dual-core, with hyper-threading) with 4GB of DDR2 (albeit locked at 800MHz FSB) motherboard adequate for a small legal office. Eight (8) desk sets and in use pretty hard throughout the day. As well, there's often a 6-8 session inbound teleconference. This low watt board is presently running 'the other guy,' but the without the conferencing. Desk sets 'prefer' G722 (g711 fallback) and our vsp, voicenetwork, supports g722 on the registered 'trunk.' (2) Target OS is CENTOS 6.3 x86_64 (unless repsonce here persuades otherwise). For optimum fs+os performance, should the mobo BIOS leave the hyper-threading enabled or should hyper-threading be disabled Also, (2) should we build fs native 64-bit or native 32-bit for this mobo setup? (heard unsupported /stories/ that some apps run better as 32-bit on this gen of ATOM) Thanks,
Hi Scott, I’m running Freeswitch on a Atom N270 with 2 GB RAM and a 120GB Solid State Disk on a industrial computer (no fans, no moving parts). This box easily can handle 70 users with basic pbx functions. One thing to notice: avoid transcoding! This is way too much for a Atom. One channel transcoding causes 40% CPU usage. We use G729 as the default codec. Im running FreeBSD 8.1 x86 on that box. No need for 64bit imho. Regards, Erik Van: freeswitch-users-bounces@lists.freeswitch.org [mailto:freeswitch-users-bounces@lists.freeswitch.org] Namens Scott Verzonden: vrijdag 19 oktober 2012 4:08 Aan: FreeSWITCH-users@lists.freeswitch.org Onderwerp: [Freeswitch-users] ATOM D500 Hello fs_users. New to the list and to fs We're migrating to fs. (1) Is an Atom(TM) CPU D525 @ 1.80GHz (Dual-core, with hyper-threading) with 4GB of DDR2 (albeit locked at 800MHz FSB) motherboard adequate for a small legal office. Eight (8) desk sets and in use pretty hard throughout the day. As well, there's often a 6-8 session inbound teleconference. This low watt board is presently running 'the other guy,' but the without the conferencing. Desk sets 'prefer' G722 (g711 fallback) and our vsp, voicenetwork, supports g722 on the registered 'trunk.' (2) Target OS is CENTOS 6.3 x86_64 (unless repsonce here persuades otherwise). For optimum fs+os performance, should the mobo BIOS leave the hyper-threading enabled or should hyper-threading be disabled Also, (2) should we build fs native 64-bit or native 32-bit for this mobo setup? (heard unsupported /stories/ that some apps run better as 32-bit on this gen of ATOM) Thanks, [cid:image1a5c44.PNG@294c740e.4783480e] Experience our latest innovations at the Hortifair. Register for free tickets<http://www.certhon.com/news/register-hortifair> Beleef onze nieuwste innovaties op de Hortifair. Schrijf u in voor gratis kaarten<http://www.certhon.nl/nieuws/inschrijven-hortifair> [cid:imageb07bfb.PNG@5efd9bd8.43b7103c] ABC Westland 555 Tel: +31 174 22 50 80 P.O. Box 90 Fax: +31 174 22 50 81 Mob: +31 624 423 009 2685 ZH Poeldijk erik.dekkers@certhon.com<mailto:erik.dekkers@certhon.com> The Netherlands www.certhon.com<http://www.certhon.com> DISCLAIMER All our quotations, all orders and all contracts are subject to the AVAG-CONDITIONS. Op alle offertes, opdrachten en overeenkomsten zijn de AVAG-verkoopvoorwaarden van toepassing.
Hi Scott, I'm not going to say it's adequate or not. But just an experience of an installation with D945GCLF2 w/ 2GB RAM. It was running as an outbound contact center PABX serving 10-seats. But voice recording is done to all calls 100%. So, this load somehow could be allocated to call conferencing. It was running almost 2 years without any major problem. To minimize the archive space, a script compresses them to OGG format after 2 days during off-shift. We would be glad to hear your result. Cheers! /Nandy On Fri, Oct 19, 2012 at 10:08 AM, Scott <8f27e956@gmail.com> wrote:
Hello fs_users. New to the list and to fs We're migrating to fs.
(1) Is an Atom(TM) CPU D525 @ 1.80GHz (Dual-core, with hyper-threading) with 4GB of DDR2 (albeit locked at 800MHz FSB) motherboard adequate for a small legal office. Eight (8) desk sets and in use pretty hard throughout the day. As well, there's often a 6-8 session inbound teleconference. This low watt board is presently running 'the other guy,' but the without the conferencing. Desk sets 'prefer' G722 (g711 fallback) and our vsp, voicenetwork, supports g722 on the registered 'trunk.'
(2) Target OS is CENTOS 6.3 x86_64 (unless repsonce here persuades otherwise). For optimum fs+os performance, should the mobo BIOS leave the hyper-threading enabled or should hyper-threading be disabled
Also,
(2) should we build fs native 64-bit or native 32-bit for this mobo setup? (heard unsupported /stories/ that some apps run better as 32-bit on this gen of ATOM)
Thanks,
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
participants (3)
-
Erik Dekkers
-
Nandy Dagondon
-
Scott