Dear Joseph, thanks for the reply, the password is not real, but you're right, I should have deleted the field, it is not necessary. As for the solution I will try and answer the results, thanks El 9 sep. 2017 9:38 AM, "Joseph Waite" <joelists@tm.net.uk> escribió: Ok Firstly, you should always redact and sensitive parts of config files before posting to a public user group. And Hacker now has the access credential for your radius server, I would advise changing the password immediately. This line should have had the IP and password blanked out <param name="authserver" value="170.84.252.34:1812:J79RSaEh5dswcGdffyP5rg4u”/> In regards to the issue your having, I would be surprised if it is actually an issue with the radius module as Dmitriy suggests and would suspect that it is the way FS passes the 2 different values used. If you compare the radius packet in your original email, with the radius config file, dst-number-in is using FS variable sip_to_user with a secondary of dialed_extension which is passing the information correctly in the radius packet, however both Called-Station-Id & dst-number-out are using dialed_extension as the variable. A check of the values of the variables at the relevant time would confirm. Assuming I’m correct above the following change should resolve the issue for you. In the xml_radius config file change the following line <param vendor="Cisco" name="Cisco-AVPair" variable="destination_number" format="dst-number-out=%s”/> to look like this <param vendor="Cisco" name="Cisco-AVPair" variable="sip_to_user” secondary_ variable="destination_number" format="dst-number-out=%s”/> Also if you need the same for the Called-Station-Id the change the following line <param name="Called-Station-Id" variable="destination_number" format="%s"/> to look like <param name="Called-Station-Id" variable="sip_to_user” secondary_va riable="destination_number" format="%s"/> Hope this helps. Regards On 6 Sep 2017, at 18:39, Phonecall SRL - Nicolas Paleari < npaleari@phonecallsrl.com.ar> wrote: Hi, copy the contents of the file: <configuration name="xml_radius.conf" description="Radius XML Gateway"> <auth_invite> <connection name="jerasoft_vcs"> <param name="authserver" value="170.84.252.34:1812: J79RSaEh5dswcGdffyP5rg4u"/> <param name="radius_timeout" value="10"/> <param name="radius_retries" value="2"/> <param name="radius_deadtime" value="0"/> <param name="dictionary" value="/usr/local/freeswitch/ conf/dictionaries/dictionary"/> <param name="seqfile" value="/var/run/freeswitch/radius.seq"/> </connection> <fields> <param vendor="Cisco" name="Cisco-AVPair" variable="ip" format="src-gw-ip=%s"/> <param vendor="Cisco" name="Cisco-AVPair" variable="sip_from_user" format="src-gw-name=%s"/> <param vendor="Cisco" name="h323-conf-id" variable="Core-UUID" format="%s"/> <param vendor="Cisco" name="Cisco-AVPair" variable="ip" format="request-type=number"/> <param name="Called-Station-Id" variable="sip_to_user" format="%s"/> <param name="Calling-Station-Id" variable="sip_from_user" format="%s"/> <param name="User-Name" variable="sip_from_user" format="%s"/> <param name="Digest-Response" variable="sip_auth_response" format="%s"/> <param name="Digest-Realm" variable="sip_auth_realm" format="%s"/> <param name="Digest-Nonce" variable="sip_auth_nonce" format="%s"/> <param name="Digest-Username" variable="sip_auth_username" format="%s"/> <param name="Digest-URI" variable="sip_auth_uri" format="%s"/> <param name="Digest-Method" variable="sip_auth_method" format="%s"/> <param name="Digest-Algorithm" variable="sip_auth_method" format="MD5"/> <param name="Digest-Qop" variable="sip_auth_qop" format="%s"/> <param name="Digest-CNonce" variable="sip_auth_cnonce" format="%s"/> <param name="Digest-Nonce-Count" variable="sip_auth_nc" format="%s"/> </fields> </auth_invite> <auth_reg> <connection name="jerasoft_vcs"> <param name="authserver" value="170.84.252.34:1812: J79RSaEh5dswcGdffyP5rg4u"/> <param name="radius_timeout" value="10"/> <param name="radius_retries" value="2"/> <param name="radius_deadtime" value="0"/> <param name="dictionary" value="/usr/local/freeswitch/ conf/dictionaries/dictionary"/> <param name="seqfile" value="/var/run/freeswitch/radius.seq"/> </connection> <fields> <param vendor="Cisco" name="Cisco-AVPair" variable="ip" format="request-type=user"/> <param vendor="Cisco" name="Cisco-AVPair" variable="ip" format="src-gw-ip=%s"/> <param vendor="Cisco" name="Cisco-AVPair" variable="sip_from_user" format="src-gw-name=%s"/> <param name="User-Name" variable="sip_from_user" format="%s"/> <param name="Digest-Response" variable="sip_auth_response" format="%s"/> <param name="Digest-Realm" variable="sip_auth_realm" format="%s"/> <param name="Digest-Nonce" variable="sip_auth_nonce" format="%s"/> <param name="Digest-Username" variable="sip_auth_username" format="%s"/> <param name="Digest-URI" variable="sip_auth_uri" format="%s"/> <param name="Digest-Method" variable="sip_auth_method" format="%s"/> <param name="Digest-Algorithm" variable="sip_auth_method" format="MD5"/> <param name="Digest-Qop" variable="sip_auth_qop" format="%s"/> <param name="Digest-CNonce" variable="sip_auth_cnonce" format="%s"/> <param name="Digest-Nonce-Count" variable="sip_auth_nc" format="%s"/> </fields> </auth_reg> <auth_app> <connection name="jerasoft_vcs"> <param name="authserver" value="170.84.252.34:1812: J79RSaEh5dswcGdffyP5rg4u"/> <param name="radius_timeout" value="10"/> <param name="radius_retries" value="2"/> <param name="radius_deadtime" value="0"/> <param name="dictionary" value="/usr/local/freeswitch/ conf/dictionaries/dictionary"/> <param name="seqfile" value="/var/run/freeswitch/radius.seq"/> </connection> <fields> <param vendor="Cisco" name="h323-conf-id" variable_secondary="uuid" variable="originating_leg_uuid" format="%s"/> <param vendor="Cisco" name="Cisco-AVPair" variable="uuid" format="h323-call-id=%s"/> <param vendor="Cisco" name="Cisco-AVPair" variable="sip_network_ip" format="src-gw-ip=%s"/> <param vendor="Cisco" name="Cisco-AVPair" variable="sip_from_user" format="src-gw-name=%s"/> <param vendor="Cisco" name="Cisco-AVPair" variable="sip_from_user" format="src-number-in=%s" /> <param vendor="Cisco" name="Cisco-AVPair" variable="sip_to_user" format="dst-number-in=%s" /> <param name="Called-Station-Id" variable="sip_to_user" format="%s"/> <param name="Calling-Station-Id" variable="sip_from_user" format="%s"/> </fields> </auth_app> <acct_start> <connection name="jerasoft_vcs"> <param name="acctserver" value="170.84.252.34:1813: J79RSaEh5dswcGdffyP5rg4u"/> <param name="radius_timeout" value="10"/> <param name="radius_retries" value="0"/> <param name="radius_deadtime" value="0"/> <param name="dictionary" value="/usr/local/freeswitch/ conf/dictionaries/dictionary"/> <param name="seqfile" value="/var/run/freeswitch/radius.seq"/> </connection> <fields> <param vendor="Cisco" name="h323-call-origin" variable="h323-call-origin" default="answer" format="%s"/> <param vendor="Cisco" name="h323-conf-id" variable_secondary="uuid" variable="originating_leg_uuid" format="%s"/> <param vendor="Cisco" name="Cisco-AVPair" variable="uuid" format="h323-call-id=%s"/> <param vendor="Cisco" name="Cisco-AVPair" variable="sip_contact_host" format="src-gw-ip=%s"/> <param vendor="Cisco" name="Cisco-AVPair" variable="sip_from_user" variable_secondary="ani" format="src-gw-name=%s"/> <param vendor="Cisco" name="Cisco-AVPair" variable="sip_from_user" variable_secondary="ani" format="src-number-in=%s" /> <param vendor="Cisco" name="Cisco-AVPair" variable="sip_from_user" variable_secondary="ani" format="src-number-out=%s" /> <param name="Calling-Station-Id" variable="sip_from_user" variable_secondary="ani" format="%s"/> <param vendor="Cisco" name="Cisco-AVPair" variable="sip_to_host" format="dst-gw-ip=%s"/> <param vendor="Cisco" name="Cisco-AVPair" variable="destination_number" format="dst-gw-name=%s"/> <param vendor="Cisco" name="Cisco-AVPair" variable="sip_to_user" format="dst-number-in=%s" /> <param vendor="Cisco" name="Cisco-AVPair" variable="destination_number" format="dst-number-out=%s" /> <param name="Called-Station-Id" variable="destination_number" format="%s"/> <param vendor="Cisco" name="h323-setup-time"/> </fields> <conditions> <condition> <param var="sip_to_host" regex="^127\.0\.0\.1" anti="true"/> </condition> </conditions> </acct_start> <acct_end> <connection name="jerasoft_vcs"> <param name="acctserver" value="170.84.252.34:1813: J79RSaEh5dswcGdffyP5rg4u"/> <param name="radius_timeout" value="10"/> <param name="radius_retries" value="0"/> <param name="radius_deadtime" value="0"/> <param name="dictionary" value="/usr/local/freeswitch/ conf/dictionaries/dictionary"/> <param name="seqfile" value="/var/run/freeswitch/radius.seq"/> </connection> <fields> <param vendor="Cisco" name="h323-call-origin" variable="h323-call-origin" default="answer" format="%s"/> <param vendor="Cisco" name="h323-conf-id" variable_secondary="uuid" variable="originating_leg_uuid" format="%s"/> <param vendor="Cisco" name="Cisco-AVPair" variable="uuid" format="h323-call-id=%s"/> <param vendor="Cisco" name="Cisco-AVPair" variable="sip_contact_host" format="src-gw-ip=%s"/> <param vendor="Cisco" name="Cisco-AVPair" variable="sip_from_user" variable_secondary="ani" format="src-gw-name=%s"/> <param vendor="Cisco" name="Cisco-AVPair" variable="sip_from_user" variable_secondary="ani" format="src-number-in=%s" /> <param vendor="Cisco" name="Cisco-AVPair" variable="sip_from_user" variable_secondary="ani" format="src-number-out=%s" /> <param name="Calling-Station-Id" variable="sip_from_user" variable_secondary="ani" format="%s"/> <param vendor="Cisco" name="Cisco-AVPair" variable="sip_to_host" format="dst-gw-ip=%s"/> <param vendor="Cisco" name="Cisco-AVPair" variable="sip_to_user" variable_secondary="dialed_extension" format="dst-gw-name=%s"/> <param vendor="Cisco" name="Cisco-AVPair" variable="sip_to_user" variable_secondary="dialed_extension" format="dst-number-in=%s" /> <param name="Called-Station-Id" variable="destination_number" format="%s"/> <param vendor="Cisco" name="h323-setup-time"/> <param vendor="Cisco" name="h323-connect-time"/> <param vendor="Cisco" name="h323-disconnect-time"/> <param vendor="Cisco" name="h323-disconnect-cause"/> <param name="Acct-Session-Time" variable="billsec" format="%s"/> <param vendor="Cisco" name="Cisco-AVPair" variable_secondary="progresssec" variable="progress_mediasec" format="pdd-time=%s"/> <param vendor="Cisco" name="Cisco-AVPair" variable="destination_number" format="dst-number-out=%s"/> </fields> <conditions> <condition> <param var="sip_to_host" regex="^170\.84\.252\.34" anti="true"/> </condition> </conditions> </acct_end> </configuration> Best regards <Firma Nico Phonecall_new.jpg> El 6/9/2017 a las 11:59 a. m., Jospeh Waite escribió: Could you supply a copy of your xml_radius.conf.xml? Might have a clue in there. On 6 Sep 2017, at 12:03, Nicolas Paleari <npaleari@phonecallsrl.com.ar> wrote: Hello, change does Freeswitch, I understand why it does a coding, I need to receive #, this is how the carrier calls waiting El 6 sep. 2017 7:08 AM, "Joseph Waite" <joelists@tm.net.uk> escribió:

I'm your radius config are you using the same variable to set both?

If not and they will always be the same, may be worth trying changing to use the same. That way can figure out if it's the radius module or freeswitch making the change.

Joe Waite

On 5 Sep 2017, at 14:22, Nicolas Paleari <npaleari@phonecallsrl.com.ar> wrote:

Friends, I need help, I get incorrect information in the stop packet of raduis that sends freeswitch, in the field dst-number-out the number has %23 instead of #, I do not understand why it replaces it,dst-number-out should be equal to field dst-number-in = 492482 # 541151995330 Send stop package where you see the problem:

[2017-09-01 19:03:46,119] DEBUG WORKER 38 - [pkt#175515/ACCT-STOP] --- START: [pkt#175515/ACCT-STOP] -------------------------------------- pdd-time => 0 called-station-id => 492482%23541151995330 nas-port => 0 dst-number-out => 492482%23541151995330 h323-conf-id => cd0f2a0d-4b7f-414c-b5be-d1b937a414db h323-setup-time => 2017-09-01T15:03:36.328927-0400 acct-status-type => Stop h323-disconnect-cause => 10 dst-gw-ip => 190.210.240.37 h323-disconnect-time => 2017-09-01T15:03:43.929039-0400 h323-call-id => 7a34a7be-d643-4f82-a66a-cd1eb0658b6c src-gw-ip => 190.210.240.37 dst-number-in => 492482#541151995330 h323-call-origin => originate nas-ip-address => 107.170.35.75 src-number-in => 7680858053 dst-gw-name => 492482#541151995330 h323-connect-time => 2017-09-01T15:03:38.268917-0400 src-gw-name => 7680858053 acct-session-time => 5 acct-delay-time => 0 src-number-out => 7680858053 calling-station-id => 7680858053 --- END: [pkt#175515/ACCT-STOP] --------------------------------------

I hope you can help me Thank you

<https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=webmail> Libre de virus. www.avast.com <https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=webmail>

_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com

Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com

FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org

_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com

Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com

FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org

_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org _________________________________________________________________________ Professional FreeSWITCH Consulting Services:consulting@freeswitch.orghttp://www.freeswitchsolutions.com Official FreeSWITCH Siteshttp://www.freeswitch.orghttp://confluence.freeswitch.orghttp://www.cluecon.... FreeSWITCH-users mailing listFreeSWITCH-users@lists.freeswitch.orghttp://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-usershttp://www.frees... _________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org _________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org