iLBC and spandsp codecs not available in stock install
Hi, When I do a show codecs in fs_cli, none of the spandsp codecs show up, even though GSM and G722 are enabled in vars.xml and mod_spandsp is enabled in modules.conf.xml. The module was compiled and installed. I'm having the same issue with iLBC. This isn't consistent with all modules however, since speex works just fine. Any ideas? Francis
Sounds like mod_spandsp isn't loading. Did you try loading it manually to see what error its throwing? On Dec 24, 2013, at 4:39 AM, Francis <sms@icefire.qza.net.au> wrote:
Hi,
When I do a show codecs in fs_cli, none of the spandsp codecs show up, even though GSM and G722 are enabled in vars.xml and mod_spandsp is enabled in modules.conf.xml.
The module was compiled and installed. I'm having the same issue with iLBC. This isn't consistent with all modules however, since speex works just fine. Any ideas?
Francis
This is what I got: freeswitch@internal> load mod_spandsp +OK Reloading XML -ERR [module load file routine returned an error] 2013-12-25 03:58:47.599760 [INFO] mod_enum.c:876 ENUM Reloaded 2013-12-25 03:58:47.599760 [INFO] switch_time.c:1191 Timezone reloaded 530 definitions 2013-12-25 03:58:47.599760 [CRIT] switch_loadable_module.c:1391 Error Loading module /usr/local/freeswitch/mod/mod_spandsp.so **/usr/local/freeswitch/mod/mod_spandsp.so: undefined symbol: lzma_stream_encoder** On 25/12/13 01:42, Michael Jerris wrote:
Sounds like mod_spandsp isn't loading. Did you try loading it manually to see what error its throwing?
On Dec 24, 2013, at 4:39 AM, Francis <sms@icefire.qza.net.au> wrote:
Hi,
When I do a show codecs in fs_cli, none of the spandsp codecs show up, even though GSM and G722 are enabled in vars.xml and mod_spandsp is enabled in modules.conf.xml.
The module was compiled and installed. I'm having the same issue with iLBC. This isn't consistent with all modules however, since speex works just fine. Any ideas?
Francis
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
Try going to the build root and running make spandsp-reconf make mod_spandsp-install On Dec 24, 2013 12:09 PM, "Francis" <sms@icefire.qza.net.au> wrote:
This is what I got:
freeswitch@internal> load mod_spandsp +OK Reloading XML -ERR [module load file routine returned an error]
2013-12-25 03:58:47.599760 [INFO] mod_enum.c:876 ENUM Reloaded 2013-12-25 03:58:47.599760 [INFO] switch_time.c:1191 Timezone reloaded 530 definitions 2013-12-25 03:58:47.599760 [CRIT] switch_loadable_module.c:1391 Error Loading module /usr/local/freeswitch/mod/mod_spandsp.so **/usr/local/freeswitch/mod/mod_spandsp.so: undefined symbol: lzma_stream_encoder**
On 25/12/13 01:42, Michael Jerris wrote:
Sounds like mod_spandsp isn't loading. Did you try loading it manually to see what error its throwing?
On Dec 24, 2013, at 4:39 AM, Francis <sms@icefire.qza.net.au> wrote:
Hi,
When I do a show codecs in fs_cli, none of the spandsp codecs show up, even though GSM and G722 are enabled in vars.xml and mod_spandsp is enabled in modules.conf.xml.
The module was compiled and installed. I'm having the same issue with iLBC. This isn't consistent with all modules however, since speex works just fine. Any ideas?
Francis
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
Nope, same error, thought the compile runs without a hitch. I tried building the Debian packages on a fresh Debain install and got the same problem. Is there anything in the compile or console logs worth looking for? Also, is there any library path variables I need to set? In both systems, I'm using the Vanilla config. On 25/12/2013 11:28 AM, Anthony Minessale wrote:
Try going to the build root and running
make spandsp-reconf make mod_spandsp-install
On Dec 24, 2013 12:09 PM, "Francis" <sms@icefire.qza.net.au <mailto:sms@icefire.qza.net.au>> wrote:
This is what I got:
freeswitch@internal> load mod_spandsp +OK Reloading XML -ERR [module load file routine returned an error]
2013-12-25 03:58:47.599760 [INFO] mod_enum.c:876 ENUM Reloaded 2013-12-25 03:58:47.599760 [INFO] switch_time.c:1191 Timezone reloaded 530 definitions 2013-12-25 03:58:47.599760 [CRIT] switch_loadable_module.c:1391 Error Loading module /usr/local/freeswitch/mod/mod_spandsp.so **/usr/local/freeswitch/mod/mod_spandsp.so: undefined symbol: lzma_stream_encoder**
On 25/12/13 01:42, Michael Jerris wrote: > Sounds like mod_spandsp isn't loading. Did you try loading it manually to see what error its throwing? > > On Dec 24, 2013, at 4:39 AM, Francis <sms@icefire.qza.net.au <mailto:sms@icefire.qza.net.au>> wrote: > >> Hi, >> >> When I do a show codecs in fs_cli, none of the spandsp codecs show up, >> even though GSM and G722 are enabled in vars.xml and mod_spandsp is >> enabled in modules.conf.xml. >> >> The module was compiled and installed. I'm having the same issue with >> iLBC. This isn't consistent with all modules however, since speex works >> just fine. Any ideas? >> >> Francis > > > _________________________________________________________________________ > Professional FreeSWITCH Consulting Services: > consulting@freeswitch.org <mailto:consulting@freeswitch.org> > http://www.freeswitchsolutions.com > > FreeSWITCH-powered IP PBX: The CudaTel Communication Server > http://www.cudatel.com > > Official FreeSWITCH Sites > http://www.freeswitch.org > http://wiki.freeswitch.org > http://www.cluecon.com > > FreeSWITCH-users mailing list > FreeSWITCH-users@lists.freeswitch.org <mailto:FreeSWITCH-users@lists.freeswitch.org> > http://lists.freeswitch.org/mailman/listinfo/freeswitch-users > UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users > http://www.freeswitch.org >
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org <mailto:consulting@freeswitch.org> http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org <mailto:FreeSWITCH-users@lists.freeswitch.org> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
I tried a fresh git compile just now and got the same error: 2013-12-29 00:33:09.762125 [CRIT] switch_loadable_module.c:1391 Error Loading module /usr/local/freeswitch/mod/mod_spandsp.so **/usr/local/freeswitch/mod/mod_spandsp.so: undefined symbol: lzma_stream_encoder** On 25/12/13 21:02, Francis wrote:
Nope, same error, thought the compile runs without a hitch. I tried building the Debian packages on a fresh Debain install and got the same problem.
Is there anything in the compile or console logs worth looking for?
Also, is there any library path variables I need to set? In both systems, I'm using the Vanilla config.
On 25/12/2013 11:28 AM, Anthony Minessale wrote:
Try going to the build root and running
make spandsp-reconf make mod_spandsp-install
On Dec 24, 2013 12:09 PM, "Francis" <sms@icefire.qza.net.au <mailto:sms@icefire.qza.net.au>> wrote:
This is what I got:
freeswitch@internal> load mod_spandsp +OK Reloading XML -ERR [module load file routine returned an error]
2013-12-25 03:58:47.599760 [INFO] mod_enum.c:876 ENUM Reloaded 2013-12-25 03:58:47.599760 [INFO] switch_time.c:1191 Timezone reloaded 530 definitions 2013-12-25 03:58:47.599760 [CRIT] switch_loadable_module.c:1391 Error Loading module /usr/local/freeswitch/mod/mod_spandsp.so **/usr/local/freeswitch/mod/mod_spandsp.so: undefined symbol: lzma_stream_encoder**
On 25/12/13 01:42, Michael Jerris wrote: > Sounds like mod_spandsp isn't loading. Did you try loading it manually to see what error its throwing? > > On Dec 24, 2013, at 4:39 AM, Francis <sms@icefire.qza.net.au <mailto:sms@icefire.qza.net.au>> wrote: > >> Hi, >> >> When I do a show codecs in fs_cli, none of the spandsp codecs show up, >> even though GSM and G722 are enabled in vars.xml and mod_spandsp is >> enabled in modules.conf.xml. >> >> The module was compiled and installed. I'm having the same issue with >> iLBC. This isn't consistent with all modules however, since speex works >> just fine. Any ideas? >> >> Francis > > > _________________________________________________________________________ > Professional FreeSWITCH Consulting Services: > consulting@freeswitch.org <mailto:consulting@freeswitch.org> > http://www.freeswitchsolutions.com > > FreeSWITCH-powered IP PBX: The CudaTel Communication Server > http://www.cudatel.com > > Official FreeSWITCH Sites > http://www.freeswitch.org > http://wiki.freeswitch.org > http://www.cluecon.com > > FreeSWITCH-users mailing list > FreeSWITCH-users@lists.freeswitch.org <mailto:FreeSWITCH-users@lists.freeswitch.org> > http://lists.freeswitch.org/mailman/listinfo/freeswitch-users > UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users > http://www.freeswitch.org >
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org <mailto:consulting@freeswitch.org> http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org <mailto:FreeSWITCH-users@lists.freeswitch.org> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
Hi Francis, Make sure liblzma.so was successfully built. Then try doing something like this right before you launch freeswitch: export LD_PRELOAD=/usr/lib/i386-linux-gnu/liblzma.so Note that that location is for 32-bit, your liblzma.so may be somewhere different. Danny Iland On Sat, Dec 28, 2013 at 8:36 AM, Francis <sms@skyline.qza.net.au> wrote:
I tried a fresh git compile just now and got the same error:
2013-12-29 00:33:09.762125 [CRIT] switch_loadable_module.c:1391 Error Loading module /usr/local/freeswitch/mod/mod_spandsp.so **/usr/local/freeswitch/mod/mod_spandsp.so: undefined symbol: lzma_stream_encoder**
On 25/12/13 21:02, Francis wrote:
Nope, same error, thought the compile runs without a hitch. I tried building the Debian packages on a fresh Debain install and got the same problem.
Is there anything in the compile or console logs worth looking for?
Also, is there any library path variables I need to set? In both systems, I'm using the Vanilla config.
On 25/12/2013 11:28 AM, Anthony Minessale wrote:
Try going to the build root and running
make spandsp-reconf make mod_spandsp-install
On Dec 24, 2013 12:09 PM, "Francis" <sms@icefire.qza.net.au <mailto:sms@icefire.qza.net.au>> wrote:
This is what I got:
freeswitch@internal> load mod_spandsp +OK Reloading XML -ERR [module load file routine returned an error]
2013-12-25 03:58:47.599760 [INFO] mod_enum.c:876 ENUM Reloaded 2013-12-25 03:58:47.599760 [INFO] switch_time.c:1191 Timezone
reloaded
530 definitions 2013-12-25 03:58:47.599760 [CRIT] switch_loadable_module.c:1391
Error
Loading module /usr/local/freeswitch/mod/mod_spandsp.so **/usr/local/freeswitch/mod/mod_spandsp.so: undefined symbol: lzma_stream_encoder**
On 25/12/13 01:42, Michael Jerris wrote: > Sounds like mod_spandsp isn't loading. Did you try loading it manually to see what error its throwing? > > On Dec 24, 2013, at 4:39 AM, Francis <sms@icefire.qza.net.au <mailto:sms@icefire.qza.net.au>> wrote: > >> Hi, >> >> When I do a show codecs in fs_cli, none of the spandsp codecs show up, >> even though GSM and G722 are enabled in vars.xml and mod_spandsp
is
>> enabled in modules.conf.xml. >> >> The module was compiled and installed. I'm having the same issue with >> iLBC. This isn't consistent with all modules however, since speex works >> just fine. Any ideas? >> >> Francis > > >
> Professional FreeSWITCH Consulting Services: > consulting@freeswitch.org <mailto:consulting@freeswitch.org> > http://www.freeswitchsolutions.com > > FreeSWITCH-powered IP PBX: The CudaTel Communication Server > http://www.cudatel.com > > Official FreeSWITCH Sites > http://www.freeswitch.org > http://wiki.freeswitch.org > http://www.cluecon.com > > FreeSWITCH-users mailing list > FreeSWITCH-users@lists.freeswitch.org <mailto:FreeSWITCH-users@lists.freeswitch.org> > http://lists.freeswitch.org/mailman/listinfo/freeswitch-users > UNSUBSCRIBE:
http://lists.freeswitch.org/mailman/options/freeswitch-users
Professional FreeSWITCH Consulting Services: consulting@freeswitch.org <mailto:consulting@freeswitch.org> http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org <mailto:FreeSWITCH-users@lists.freeswitch.org> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:
http://lists.freeswitch.org/mailman/options/freeswitch-users
Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE: http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
Thanks Danny, I tried export and it worked, though the path was /lib, not /usr/lib. Building the latest git on Debian 7.3 32bit, creating the deb packages works, codecs all show up fine without using export. Francis On 1/01/2014 8:20 AM, Danny Iland wrote:
Hi Francis,
Make sure liblzma.so was successfully built. Then try doing something like this right before you launch freeswitch:
export LD_PRELOAD=/usr/lib/i386-linux-gnu/liblzma.so
Note that that location is for 32-bit, your liblzma.so may be somewhere different.
Danny Iland
On Sat, Dec 28, 2013 at 8:36 AM, Francis <sms@skyline.qza.net.au <mailto:sms@skyline.qza.net.au>> wrote:
I tried a fresh git compile just now and got the same error:
2013-12-29 00:33:09.762125 [CRIT] switch_loadable_module.c:1391 Error Loading module /usr/local/freeswitch/mod/mod_spandsp.so **/usr/local/freeswitch/mod/mod_spandsp.so: undefined symbol: lzma_stream_encoder**
On 25/12/13 21:02, Francis wrote: > Nope, same error, thought the compile runs without a hitch. I tried > building the Debian packages on a fresh Debain install and got the same > problem. > > Is there anything in the compile or console logs worth looking for? > > Also, is there any library path variables I need to set? In both > systems, I'm using the Vanilla config. > > > On 25/12/2013 11:28 AM, Anthony Minessale wrote: >> >> Try going to the build root and running >> >> make spandsp-reconf >> make mod_spandsp-install >> >> On Dec 24, 2013 12:09 PM, "Francis" <sms@icefire.qza.net.au <mailto:sms@icefire.qza.net.au> >> <mailto:sms@icefire.qza.net.au <mailto:sms@icefire.qza.net.au>>> wrote: >> >> This is what I got: >> >> freeswitch@internal> load mod_spandsp >> +OK Reloading XML >> -ERR [module load file routine returned an error] >> >> 2013-12-25 03:58:47.599760 [INFO] mod_enum.c:876 ENUM Reloaded >> 2013-12-25 03:58:47.599760 [INFO] switch_time.c:1191 Timezone reloaded >> 530 definitions >> 2013-12-25 03:58:47.599760 [CRIT] switch_loadable_module.c:1391 Error >> Loading module /usr/local/freeswitch/mod/mod_spandsp.so >> **/usr/local/freeswitch/mod/mod_spandsp.so: undefined symbol: >> lzma_stream_encoder** >> >> >> On 25/12/13 01:42, Michael Jerris wrote: >> > Sounds like mod_spandsp isn't loading. Did you try loading it >> manually to see what error its throwing? >> > >> > On Dec 24, 2013, at 4:39 AM, Francis <sms@icefire.qza.net.au <mailto:sms@icefire.qza.net.au> >> <mailto:sms@icefire.qza.net.au <mailto:sms@icefire.qza.net.au>>> wrote: >> > >> >> Hi, >> >> >> >> When I do a show codecs in fs_cli, none of the spandsp codecs >> show up, >> >> even though GSM and G722 are enabled in vars.xml and mod_spandsp is >> >> enabled in modules.conf.xml. >> >> >> >> The module was compiled and installed. I'm having the same >> issue with >> >> iLBC. This isn't consistent with all modules however, since >> speex works >> >> just fine. Any ideas? >> >> >> >> Francis >> > >> > >> > >> _________________________________________________________________________ >> > Professional FreeSWITCH Consulting Services: >> > consulting@freeswitch.org <mailto:consulting@freeswitch.org> <mailto:consulting@freeswitch.org <mailto:consulting@freeswitch.org>> >> > http://www.freeswitchsolutions.com >> > >> > FreeSWITCH-powered IP PBX: The CudaTel Communication Server >> > http://www.cudatel.com >> > >> > Official FreeSWITCH Sites >> > http://www.freeswitch.org >> > http://wiki.freeswitch.org >> > http://www.cluecon.com >> > >> > FreeSWITCH-users mailing list >> > FreeSWITCH-users@lists.freeswitch.org <mailto:FreeSWITCH-users@lists.freeswitch.org> >> <mailto:FreeSWITCH-users@lists.freeswitch.org <mailto:FreeSWITCH-users@lists.freeswitch.org>> >> > http://lists.freeswitch.org/mailman/listinfo/freeswitch-users >> > >> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users >> > http://www.freeswitch.org >> > >> >> _________________________________________________________________________ >> Professional FreeSWITCH Consulting Services: >> consulting@freeswitch.org <mailto:consulting@freeswitch.org> <mailto:consulting@freeswitch.org <mailto:consulting@freeswitch.org>> >> http://www.freeswitchsolutions.com >> >> FreeSWITCH-powered IP PBX: The CudaTel Communication Server >> http://www.cudatel.com >> >> Official FreeSWITCH Sites >> http://www.freeswitch.org >> http://wiki.freeswitch.org >> http://www.cluecon.com >> >> FreeSWITCH-users mailing list >> FreeSWITCH-users@lists.freeswitch.org <mailto:FreeSWITCH-users@lists.freeswitch.org> >> <mailto:FreeSWITCH-users@lists.freeswitch.org <mailto:FreeSWITCH-users@lists.freeswitch.org>> >> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users >> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users >> http://www.freeswitch.org >> >> >> >> _________________________________________________________________________ >> Professional FreeSWITCH Consulting Services: >> consulting@freeswitch.org <mailto:consulting@freeswitch.org> >> http://www.freeswitchsolutions.com >> >> FreeSWITCH-powered IP PBX: The CudaTel Communication Server >> http://www.cudatel.com >> >> Official FreeSWITCH Sites >> http://www.freeswitch.org >> http://wiki.freeswitch.org >> http://www.cluecon.com >> >> FreeSWITCH-users mailing list >> FreeSWITCH-users@lists.freeswitch.org <mailto:FreeSWITCH-users@lists.freeswitch.org> >> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users >> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users >> http://www.freeswitch.org > > > > _________________________________________________________________________ > Professional FreeSWITCH Consulting Services: > consulting@freeswitch.org <mailto:consulting@freeswitch.org> > http://www.freeswitchsolutions.com > > FreeSWITCH-powered IP PBX: The CudaTel Communication Server > http://www.cudatel.com > > Official FreeSWITCH Sites > http://www.freeswitch.org > http://wiki.freeswitch.org > http://www.cluecon.com > > FreeSWITCH-users mailing list > FreeSWITCH-users@lists.freeswitch.org <mailto:FreeSWITCH-users@lists.freeswitch.org> > http://lists.freeswitch.org/mailman/listinfo/freeswitch-users > UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users > http://www.freeswitch.org >
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org <mailto:consulting@freeswitch.org> http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org <mailto:FreeSWITCH-users@lists.freeswitch.org> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
participants (4)
-
Anthony Minessale
-
Danny Iland
-
Francis
-
Michael Jerris