Reading the wiki, I have Line 1 (the fxs port) configured as ext 1001 and PSTN User (the fxo port) configured as ext 1000. I am a bit unsure of the dial plan part of the wiki's config? Under "VoIP-To-PSTN Gateway Setup" I set "Line 1 VoIP Caller DP:" to a dial plan with (xx.) which dials whatever is sent to it? Under "PSTN-To-VoIP Gateway Setup" I set "PSTN Caller Default DP:" to a dial plan with (<:ABCD>S0) where ABCD could be a group dial for example like 2000 as in the default config? Do I understand this correctly? I would try this out, but I don't have a pstn here and want to pass this off configured for delivery tomorrow and be prepared for any adjustments via ssh if need be... Thanks! jlc