Hi, I have installed freeswitch through SVN in centos.OutBound is working fine .But not always .Once we make 8 to 10 call from a sip extension we get service unavailable error in xlite . Error and configuration are pasted below .we observed the problem is getting rectified after 5 to 10 mins .and we are able to make calls and again after 8 to 10 calls Errors happen how to check. what will be the issue my configuration is: *wanpipe1.conf * [devices] wanpipe1 = WAN_AFT_TE1, Comment [interfaces] w1g1 = wanpipe1, , TDM_VOICE_API, Comment [wanpipe1] CARD_TYPE = AFT S514CPU = A CommPort = PRI AUTO_PCISLOT = NO PCISLOT = 9 PCIBUS = 0 FE_MEDIA = E1 FE_LCODE = HDB3 FE_FRAME = CRC4 FE_LINE = 1 TE_CLOCK = NORMAL TE_REF_CLOCK = 0 TE_SIG_MODE = CCS TE_HIGHIMPEDANCE = NO LBO = 120OH FE_TXTRISTATE = NO MTU = 1500 UDPPORT = 9000 TTL = 255 IGNORE_FRONT_END = NO TDMV_SPAN = 1 TDMV_DCHAN = 16 TDMV_HW_DTMF = NO [w1g1] ACTIVE_CH = ALL TDMV_ECHO_OFF = NO TDMV_HWEC = YES MTU = 80 * openzap.conf* [span wanpipe] name => OpenZAP number => 1 trunk_type => E1 b-channel => 1:1-15 d-channel => 1:16 b-channel => 1:17-31 *openzap.conf.xml * <configuration name="openzap.conf" description="OpenZAP Configuration"> <settings> <param name="debug" value="0"/> </settings> <pri_spans> <span id="1"> <param name="mode" value="user"/> <param name="dialect" value="euro"/> <param name="dialplan" value="XML"/> <param name="context" value="default"/> </span> </pri_spans> </configuration> *default.xml* <?xml version="1.0" encoding="utf-8"?> <!-- http://wiki.freeswitch.org/wiki/Dialplan_XML --> <include> <context name="default"> <extension name="Long Distance - wanpipe"> <condition field="destination_number" expression="^9(\d{5,15})$"> <action application="set" data="dialed_ext=$1"/> <action application="bridge" data="OpenZAP/1/a/${dialed_ext}"/> </condition> </extension> </context> </include> After starting the freeswitch . In console i type oz dump 1 a *my status before calling is:* span_id: 1 chan_id: 16 physical_span_id: 1 physical_chan_id: 16 type: DQ921 state: UP last_state: DOWN cid_date: cid_name: cid_num: ani: aniII: dnis: rdnis: cause: NONE * my (oz dump 1 a) status After calling is:* span_id: 1 chan_id: 16 physical_span_id: 1 physical_chan_id: 16 type: DQ921 state: UP last_state: DOWN cid_date: cid_name: cid_num: ani: aniII: dnis: rdnis: cause: NONE But while i try to make a outbound call continously, i am getting following error [08 02 00 00 4e 18 03 a1 83 81 79 01 80] 2008-09-23 01:05:50 [DEBUG] Span:0 Q.931() Sending message to Layer4 (size: 119) 2008-09-23 01:05:50 [DEBUG] ozmod_isdn.c:319 zap_isdn_931_34() Yay I got an event! Type:[46] Size:[119] CRV: 0 (0, CTX: Originator) 2008-09-23 01:05:50 [DEBUG] ozmod_isdn.c:351 zap_isdn_931_34() zchan 0 (-1:-1) source isdn_data->channels_remote_crv[0] 2008-09-23 01:05:50 [DEBUG] ozmod_isdn.c:399 zap_isdn_931_34() Changing state on 1:1 from DOWN to RESTART 2008-09-23 01:05:50 [DEBUG] Span:0 Q.931() Sending message to Q.921 (size: 119) 2008-09-23 01:05:50 [DEBUG] Span:0 Q.931() Creating Q.931 Message Header: ProtDisc 8 (0x8), CRV 0 (0), CRVflag: 0 (0), MesType: 78 (0x4e) 2008-09-23 01:05:50 [DEBUG] ozmod_isdn.c:1499 q931_rx_32() WRITE 13 -------------------------------------------------------------------------------- [08 02 00 00 4e 18 03 a1 83 81 79 01 80] 2008-09-23 01:05:50 [DEBUG] ozmod_isdn.c:796 state_advance() 1:1 STATE [RESTART] 2008-09-23 01:05:50 [DEBUG] mod_openzap.c:1368 on_clear_channel_signal() got clear channel sig [RESTART] 2008-09-23 01:05:50 [DEBUG] ozmod_isdn.c:882 state_advance() Changing state on 1:1 from RESTART to DOWN 2008-09-23 01:05:50 [DEBUG] ozmod_isdn.c:796 state_advance() 1:1 STATE [DOWN] 2008-09-23 01:05:50 [DEBUG] zap_io.c:1088 zap_channel_done() channel done 1:1 -- Thanks & Regards, Palanivel.S
That shows the other end is sending a RESTART command. Can you make a trace of the debug log on the console or the logfile from mod_logfile showing the calls working and then on to when you get the issue including the several failed call attempts in their entirety and post them to http://jira.freeswitch.org under the openzap category. On Mon, Sep 22, 2008 at 9:29 AM, palani sivagurunathan < palani.sivagurunathan@gmail.com> wrote:
Hi,
I have installed freeswitch through SVN in centos.OutBound is working fine .But not always .Once we make 8 to 10 call from a sip extension we get service unavailable error in xlite . Error and configuration are pasted below .we observed the problem is getting rectified after 5 to 10 mins .and we are able to make calls and again after 8 to 10 calls Errors happen
how to check. what will be the issue
my configuration is:
*wanpipe1.conf *
[devices] wanpipe1 = WAN_AFT_TE1, Comment
[interfaces] w1g1 = wanpipe1, , TDM_VOICE_API, Comment
[wanpipe1] CARD_TYPE = AFT S514CPU = A CommPort = PRI AUTO_PCISLOT = NO PCISLOT = 9 PCIBUS = 0 FE_MEDIA = E1 FE_LCODE = HDB3 FE_FRAME = CRC4 FE_LINE = 1 TE_CLOCK = NORMAL TE_REF_CLOCK = 0 TE_SIG_MODE = CCS TE_HIGHIMPEDANCE = NO LBO = 120OH FE_TXTRISTATE = NO MTU = 1500 UDPPORT = 9000 TTL = 255 IGNORE_FRONT_END = NO TDMV_SPAN = 1 TDMV_DCHAN = 16 TDMV_HW_DTMF = NO
[w1g1] ACTIVE_CH = ALL TDMV_ECHO_OFF = NO TDMV_HWEC = YES MTU = 80
* openzap.conf*
[span wanpipe] name => OpenZAP number => 1 trunk_type => E1 b-channel => 1:1-15 d-channel => 1:16 b-channel => 1:17-31
*openzap.conf.xml *
<configuration name="openzap.conf" description="OpenZAP Configuration"> <settings> <param name="debug" value="0"/> </settings> <pri_spans> <span id="1"> <param name="mode" value="user"/> <param name="dialect" value="euro"/> <param name="dialplan" value="XML"/> <param name="context" value="default"/> </span> </pri_spans> </configuration>
*default.xml* <?xml version="1.0" encoding="utf-8"?> <!-- http://wiki.freeswitch.org/wiki/Dialplan_XML --> <include> <context name="default"> <extension name="Long Distance - wanpipe"> <condition field="destination_number" expression="^9(\d{5,15})$"> <action application="set" data="dialed_ext=$1"/> <action application="bridge" data="OpenZAP/1/a/${dialed_ext}"/> </condition> </extension> </context> </include>
After starting the freeswitch . In console i type oz dump 1 a
*my status before calling is:*
span_id: 1 chan_id: 16 physical_span_id: 1 physical_chan_id: 16 type: DQ921 state: UP last_state: DOWN cid_date: cid_name: cid_num: ani: aniII: dnis: rdnis: cause: NONE * my (oz dump 1 a) status After calling is:*
span_id: 1 chan_id: 16 physical_span_id: 1 physical_chan_id: 16 type: DQ921 state: UP last_state: DOWN cid_date: cid_name: cid_num: ani: aniII: dnis: rdnis: cause: NONE
But while i try to make a outbound call continously, i am getting following error
[08 02 00 00 4e 18 03 a1 83 81 79 01 80]
2008-09-23 01:05:50 [DEBUG] Span:0 Q.931() Sending message to Layer4 (size: 119) 2008-09-23 01:05:50 [DEBUG] ozmod_isdn.c:319 zap_isdn_931_34() Yay I got an event! Type:[46] Size:[119] CRV: 0 (0, CTX: Originator) 2008-09-23 01:05:50 [DEBUG] ozmod_isdn.c:351 zap_isdn_931_34() zchan 0 (-1:-1) source isdn_data->channels_remote_crv[0] 2008-09-23 01:05:50 [DEBUG] ozmod_isdn.c:399 zap_isdn_931_34() Changing state on 1:1 from DOWN to RESTART 2008-09-23 01:05:50 [DEBUG] Span:0 Q.931() Sending message to Q.921 (size: 119) 2008-09-23 01:05:50 [DEBUG] Span:0 Q.931() Creating Q.931 Message Header: ProtDisc 8 (0x8), CRV 0 (0), CRVflag: 0 (0), MesType: 78 (0x4e) 2008-09-23 01:05:50 [DEBUG] ozmod_isdn.c:1499 q931_rx_32() WRITE 13
-------------------------------------------------------------------------------- [08 02 00 00 4e 18 03 a1 83 81 79 01 80]
2008-09-23 01:05:50 [DEBUG] ozmod_isdn.c:796 state_advance() 1:1 STATE [RESTART] 2008-09-23 01:05:50 [DEBUG] mod_openzap.c:1368 on_clear_channel_signal() got clear channel sig [RESTART] 2008-09-23 01:05:50 [DEBUG] ozmod_isdn.c:882 state_advance() Changing state on 1:1 from RESTART to DOWN 2008-09-23 01:05:50 [DEBUG] ozmod_isdn.c:796 state_advance() 1:1 STATE [DOWN] 2008-09-23 01:05:50 [DEBUG] zap_io.c:1088 zap_channel_done() channel done 1:1
--
Thanks & Regards, Palanivel.S
_______________________________________________ Freeswitch-users mailing list Freeswitch-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- Anthony Minessale II FreeSWITCH http://www.freeswitch.org/ ClueCon http://www.cluecon.com/ AIM: anthm MSN:anthony_minessale@hotmail.com <MSN%3Aanthony_minessale@hotmail.com> GTALK/JABBER/PAYPAL:anthony.minessale@gmail.com<PAYPAL%3Aanthony.minessale@gmail.com> IRC: irc.freenode.net #freeswitch FreeSWITCH Developer Conference sip:888@conference.freeswitch.org <sip%3A888@conference.freeswitch.org> iax:guest@conference.freeswitch.org/888 googletalk:conf+888@conference.freeswitch.org<googletalk%3Aconf%2B888@conference.freeswitch.org> pstn:213-799-1400
Antony, Thanks for the reply .I have posted in http://jira.freeswitch.org/browse/FSBUILD-79 Thanks & Regards, Palanivel.S On 9/22/08, Anthony Minessale <anthony.minessale@gmail.com> wrote:
That shows the other end is sending a RESTART command. Can you make a trace of the debug log on the console or the logfile from mod_logfile showing the calls working and then on to when you get the issue including the several failed call attempts in their entirety and post them to http://jira.freeswitch.org under the openzap category.
On Mon, Sep 22, 2008 at 9:29 AM, palani sivagurunathan < palani.sivagurunathan@gmail.com> wrote:
Hi,
I have installed freeswitch through SVN in centos.OutBound is working fine .But not always .Once we make 8 to 10 call from a sip extension we get service unavailable error in xlite . Error and configuration are pasted below .we observed the problem is getting rectified after 5 to 10 mins .and we are able to make calls and again after 8 to 10 calls Errors happen
how to check. what will be the issue
my configuration is:
*wanpipe1.conf *
[devices] wanpipe1 = WAN_AFT_TE1, Comment
[interfaces] w1g1 = wanpipe1, , TDM_VOICE_API, Comment
[wanpipe1] CARD_TYPE = AFT S514CPU = A CommPort = PRI AUTO_PCISLOT = NO PCISLOT = 9 PCIBUS = 0 FE_MEDIA = E1 FE_LCODE = HDB3 FE_FRAME = CRC4 FE_LINE = 1 TE_CLOCK = NORMAL TE_REF_CLOCK = 0 TE_SIG_MODE = CCS TE_HIGHIMPEDANCE = NO LBO = 120OH FE_TXTRISTATE = NO MTU = 1500 UDPPORT = 9000 TTL = 255 IGNORE_FRONT_END = NO TDMV_SPAN = 1 TDMV_DCHAN = 16 TDMV_HW_DTMF = NO
[w1g1] ACTIVE_CH = ALL TDMV_ECHO_OFF = NO TDMV_HWEC = YES MTU = 80
* openzap.conf*
[span wanpipe] name => OpenZAP number => 1 trunk_type => E1 b-channel => 1:1-15 d-channel => 1:16 b-channel => 1:17-31
*openzap.conf.xml *
<configuration name="openzap.conf" description="OpenZAP Configuration"> <settings> <param name="debug" value="0"/> </settings> <pri_spans> <span id="1"> <param name="mode" value="user"/> <param name="dialect" value="euro"/> <param name="dialplan" value="XML"/> <param name="context" value="default"/> </span> </pri_spans> </configuration>
*default.xml* <?xml version="1.0" encoding="utf-8"?> <!-- http://wiki.freeswitch.org/wiki/Dialplan_XML --> <include> <context name="default"> <extension name="Long Distance - wanpipe"> <condition field="destination_number" expression="^9(\d{5,15})$"> <action application="set" data="dialed_ext=$1"/> <action application="bridge" data="OpenZAP/1/a/${dialed_ext}"/> </condition> </extension> </context> </include>
After starting the freeswitch . In console i type oz dump 1 a
*my status before calling is:*
span_id: 1 chan_id: 16 physical_span_id: 1 physical_chan_id: 16 type: DQ921 state: UP last_state: DOWN cid_date: cid_name: cid_num: ani: aniII: dnis: rdnis: cause: NONE * my (oz dump 1 a) status After calling is:*
span_id: 1 chan_id: 16 physical_span_id: 1 physical_chan_id: 16 type: DQ921 state: UP last_state: DOWN cid_date: cid_name: cid_num: ani: aniII: dnis: rdnis: cause: NONE
But while i try to make a outbound call continously, i am getting following error
[08 02 00 00 4e 18 03 a1 83 81 79 01 80]
2008-09-23 01:05:50 [DEBUG] Span:0 Q.931() Sending message to Layer4 (size: 119) 2008-09-23 01:05:50 [DEBUG] ozmod_isdn.c:319 zap_isdn_931_34() Yay I got an event! Type:[46] Size:[119] CRV: 0 (0, CTX: Originator) 2008-09-23 01:05:50 [DEBUG] ozmod_isdn.c:351 zap_isdn_931_34() zchan 0 (-1:-1) source isdn_data->channels_remote_crv[0] 2008-09-23 01:05:50 [DEBUG] ozmod_isdn.c:399 zap_isdn_931_34() Changing state on 1:1 from DOWN to RESTART 2008-09-23 01:05:50 [DEBUG] Span:0 Q.931() Sending message to Q.921 (size: 119) 2008-09-23 01:05:50 [DEBUG] Span:0 Q.931() Creating Q.931 Message Header: ProtDisc 8 (0x8), CRV 0 (0), CRVflag: 0 (0), MesType: 78 (0x4e) 2008-09-23 01:05:50 [DEBUG] ozmod_isdn.c:1499 q931_rx_32() WRITE 13
-------------------------------------------------------------------------------- [08 02 00 00 4e 18 03 a1 83 81 79 01 80]
2008-09-23 01:05:50 [DEBUG] ozmod_isdn.c:796 state_advance() 1:1 STATE [RESTART] 2008-09-23 01:05:50 [DEBUG] mod_openzap.c:1368 on_clear_channel_signal() got clear channel sig [RESTART] 2008-09-23 01:05:50 [DEBUG] ozmod_isdn.c:882 state_advance() Changing state on 1:1 from RESTART to DOWN 2008-09-23 01:05:50 [DEBUG] ozmod_isdn.c:796 state_advance() 1:1 STATE [DOWN] 2008-09-23 01:05:50 [DEBUG] zap_io.c:1088 zap_channel_done() channel done 1:1
--
Thanks & Regards, Palanivel.S
_______________________________________________ Freeswitch-users mailing list Freeswitch-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- Anthony Minessale II
FreeSWITCH http://www.freeswitch.org/ ClueCon http://www.cluecon.com/
AIM: anthm MSN:anthony_minessale@hotmail.com <MSN%3Aanthony_minessale@hotmail.com> GTALK/JABBER/PAYPAL:anthony.minessale@gmail.com<PAYPAL%3Aanthony.minessale@gmail.com> IRC: irc.freenode.net #freeswitch
FreeSWITCH Developer Conference sip:888@conference.freeswitch.org <sip%3A888@conference.freeswitch.org> iax:guest@conference.freeswitch.org/888 googletalk:conf+888@conference.freeswitch.org<googletalk%3Aconf%2B888@conference.freeswitch.org> pstn:213-799-1400
_______________________________________________ Freeswitch-users mailing list Freeswitch-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- Thanks & Regards, Palanivel.S
I have moved your issue to http://jira.freeswitch.org/browse/OPENZAP-18 since it's an openzap issue and not a build system issue. Please pay attention to the emails you receive regarding the issue and promptly reply to any comments. On Tue, Sep 23, 2008 at 9:01 AM, palani sivagurunathan < palani.sivagurunathan@gmail.com> wrote:
Antony,
Thanks for the reply .I have posted in http://jira.freeswitch.org/browse/FSBUILD-79
Thanks & Regards, Palanivel.S
On 9/22/08, Anthony Minessale <anthony.minessale@gmail.com> wrote:
That shows the other end is sending a RESTART command. Can you make a trace of the debug log on the console or the logfile from mod_logfile showing the calls working and then on to when you get the issue including the several failed call attempts in their entirety and post them to http://jira.freeswitch.org under the openzap category.
On Mon, Sep 22, 2008 at 9:29 AM, palani sivagurunathan < palani.sivagurunathan@gmail.com> wrote:
Hi,
I have installed freeswitch through SVN in centos.OutBound is working fine .But not always .Once we make 8 to 10 call from a sip extension we get service unavailable error in xlite . Error and configuration are pasted below .we observed the problem is getting rectified after 5 to 10 mins .and we are able to make calls and again after 8 to 10 calls Errors happen
how to check. what will be the issue
my configuration is:
*wanpipe1.conf *
[devices] wanpipe1 = WAN_AFT_TE1, Comment
[interfaces] w1g1 = wanpipe1, , TDM_VOICE_API, Comment
[wanpipe1] CARD_TYPE = AFT S514CPU = A CommPort = PRI AUTO_PCISLOT = NO PCISLOT = 9 PCIBUS = 0 FE_MEDIA = E1 FE_LCODE = HDB3 FE_FRAME = CRC4 FE_LINE = 1 TE_CLOCK = NORMAL TE_REF_CLOCK = 0 TE_SIG_MODE = CCS TE_HIGHIMPEDANCE = NO LBO = 120OH FE_TXTRISTATE = NO MTU = 1500 UDPPORT = 9000 TTL = 255 IGNORE_FRONT_END = NO TDMV_SPAN = 1 TDMV_DCHAN = 16 TDMV_HW_DTMF = NO
[w1g1] ACTIVE_CH = ALL TDMV_ECHO_OFF = NO TDMV_HWEC = YES MTU = 80
* openzap.conf*
[span wanpipe] name => OpenZAP number => 1 trunk_type => E1 b-channel => 1:1-15 d-channel => 1:16 b-channel => 1:17-31
*openzap.conf.xml *
<configuration name="openzap.conf" description="OpenZAP Configuration"> <settings> <param name="debug" value="0"/> </settings> <pri_spans> <span id="1"> <param name="mode" value="user"/> <param name="dialect" value="euro"/> <param name="dialplan" value="XML"/> <param name="context" value="default"/> </span> </pri_spans> </configuration>
*default.xml* <?xml version="1.0" encoding="utf-8"?> <!-- http://wiki.freeswitch.org/wiki/Dialplan_XML --> <include> <context name="default"> <extension name="Long Distance - wanpipe"> <condition field="destination_number" expression="^9(\d{5,15})$"> <action application="set" data="dialed_ext=$1"/> <action application="bridge" data="OpenZAP/1/a/${dialed_ext}"/> </condition> </extension> </context> </include>
After starting the freeswitch . In console i type oz dump 1 a
*my status before calling is:*
span_id: 1 chan_id: 16 physical_span_id: 1 physical_chan_id: 16 type: DQ921 state: UP last_state: DOWN cid_date: cid_name: cid_num: ani: aniII: dnis: rdnis: cause: NONE * my (oz dump 1 a) status After calling is:*
span_id: 1 chan_id: 16 physical_span_id: 1 physical_chan_id: 16 type: DQ921 state: UP last_state: DOWN cid_date: cid_name: cid_num: ani: aniII: dnis: rdnis: cause: NONE
But while i try to make a outbound call continously, i am getting following error
[08 02 00 00 4e 18 03 a1 83 81 79 01 80]
2008-09-23 01:05:50 [DEBUG] Span:0 Q.931() Sending message to Layer4 (size: 119) 2008-09-23 01:05:50 [DEBUG] ozmod_isdn.c:319 zap_isdn_931_34() Yay I got an event! Type:[46] Size:[119] CRV: 0 (0, CTX: Originator) 2008-09-23 01:05:50 [DEBUG] ozmod_isdn.c:351 zap_isdn_931_34() zchan 0 (-1:-1) source isdn_data->channels_remote_crv[0] 2008-09-23 01:05:50 [DEBUG] ozmod_isdn.c:399 zap_isdn_931_34() Changing state on 1:1 from DOWN to RESTART 2008-09-23 01:05:50 [DEBUG] Span:0 Q.931() Sending message to Q.921 (size: 119) 2008-09-23 01:05:50 [DEBUG] Span:0 Q.931() Creating Q.931 Message Header: ProtDisc 8 (0x8), CRV 0 (0), CRVflag: 0 (0), MesType: 78 (0x4e) 2008-09-23 01:05:50 [DEBUG] ozmod_isdn.c:1499 q931_rx_32() WRITE 13
-------------------------------------------------------------------------------- [08 02 00 00 4e 18 03 a1 83 81 79 01 80]
2008-09-23 01:05:50 [DEBUG] ozmod_isdn.c:796 state_advance() 1:1 STATE [RESTART] 2008-09-23 01:05:50 [DEBUG] mod_openzap.c:1368 on_clear_channel_signal() got clear channel sig [RESTART] 2008-09-23 01:05:50 [DEBUG] ozmod_isdn.c:882 state_advance() Changing state on 1:1 from RESTART to DOWN 2008-09-23 01:05:50 [DEBUG] ozmod_isdn.c:796 state_advance() 1:1 STATE [DOWN] 2008-09-23 01:05:50 [DEBUG] zap_io.c:1088 zap_channel_done() channel done 1:1
--
Thanks & Regards, Palanivel.S
_______________________________________________ Freeswitch-users mailing list Freeswitch-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- Anthony Minessale II
FreeSWITCH http://www.freeswitch.org/ ClueCon http://www.cluecon.com/
AIM: anthm MSN:anthony_minessale@hotmail.com <MSN%3Aanthony_minessale@hotmail.com> GTALK/JABBER/PAYPAL:anthony.minessale@gmail.com<PAYPAL%3Aanthony.minessale@gmail.com> IRC: irc.freenode.net #freeswitch
FreeSWITCH Developer Conference sip:888@conference.freeswitch.org <sip%3A888@conference.freeswitch.org> iax:guest@conference.freeswitch.org/888 googletalk:conf+888@conference.freeswitch.org<googletalk%3Aconf%2B888@conference.freeswitch.org> pstn:213-799-1400
_______________________________________________ Freeswitch-users mailing list Freeswitch-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
--
Thanks & Regards, Palanivel.S _______________________________________________ Freeswitch-users mailing list Freeswitch-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- Anthony Minessale II FreeSWITCH http://www.freeswitch.org/ ClueCon http://www.cluecon.com/ AIM: anthm MSN:anthony_minessale@hotmail.com <MSN%3Aanthony_minessale@hotmail.com> GTALK/JABBER/PAYPAL:anthony.minessale@gmail.com<PAYPAL%3Aanthony.minessale@gmail.com> IRC: irc.freenode.net #freeswitch FreeSWITCH Developer Conference sip:888@conference.freeswitch.org <sip%3A888@conference.freeswitch.org> iax:guest@conference.freeswitch.org/888 googletalk:conf+888@conference.freeswitch.org<googletalk%3Aconf%2B888@conference.freeswitch.org> pstn:213-799-1400
On Sep 23, 2008, at 7:13 AM, Anthony Minessale wrote:
I have moved your issue to http://jira.freeswitch.org/browse/ OPENZAP-18 since it's an openzap issue and not a build system issue.
Please pay attention to the emails you receive regarding the issue and promptly reply to any comments.
I must say that when I posted to the Jira and received emails regarding my input, it was quite annoying that my responses to the emails went to the bit bucket? I think it would be really helpful if the emails about Jira posts could be replied to and then the replies could be incorporated back into the Jira or at least reach the Jira admin. It a minimum making it much clearer that the emails cannot be replied to and providing a link to the appropriate place to reply in the Jira would be great. Just a thought, Marty
On Tue, Sep 23, 2008 at 9:01 AM, palani sivagurunathan <palani.sivagurunathan@gmail.com> wrote:
Antony,
Thanks for the reply .I have posted in http:// jira.freeswitch.org/browse/FSBUILD-79
Thanks & Regards, Palanivel.S
On 9/22/08, Anthony Minessale <anthony.minessale@gmail.com> wrote: That shows the other end is sending a RESTART command. Can you make a trace of the debug log on the console or the logfile from mod_logfile showing the calls working and then on to when you get the issue including the several failed call attempts in their entirety and post them to http://jira.freeswitch.org under the openzap category.
On Mon, Sep 22, 2008 at 9:29 AM, palani sivagurunathan <palani.sivagurunathan@gmail.com> wrote:
Hi,
I have installed freeswitch through SVN in centos.OutBound is working fine .But not always .Once we make 8 to 10 call from a sip extension we get service unavailable error in xlite . Error and configuration are pasted below .we observed the problem is getting rectified after 5 to 10 mins .and we are able to make calls and again after 8 to 10 calls Errors happen
how to check. what will be the issue
my configuration is:
wanpipe1.conf
[devices] wanpipe1 = WAN_AFT_TE1, Comment
[interfaces] w1g1 = wanpipe1, , TDM_VOICE_API, Comment
[wanpipe1] CARD_TYPE = AFT S514CPU = A CommPort = PRI AUTO_PCISLOT = NO PCISLOT = 9 PCIBUS = 0 FE_MEDIA = E1 FE_LCODE = HDB3 FE_FRAME = CRC4 FE_LINE = 1 TE_CLOCK = NORMAL TE_REF_CLOCK = 0 TE_SIG_MODE = CCS TE_HIGHIMPEDANCE = NO LBO = 120OH FE_TXTRISTATE = NO MTU = 1500 UDPPORT = 9000 TTL = 255 IGNORE_FRONT_END = NO TDMV_SPAN = 1 TDMV_DCHAN = 16 TDMV_HW_DTMF = NO
[w1g1] ACTIVE_CH = ALL TDMV_ECHO_OFF = NO TDMV_HWEC = YES MTU = 80
openzap.conf
[span wanpipe] name => OpenZAP number => 1 trunk_type => E1 b-channel => 1:1-15 d-channel => 1:16 b-channel => 1:17-31
openzap.conf.xml
<configuration name="openzap.conf" description="OpenZAP Configuration"> <settings> <param name="debug" value="0"/> </settings> <pri_spans> <span id="1"> <param name="mode" value="user"/> <param name="dialect" value="euro"/> <param name="dialplan" value="XML"/> <param name="context" value="default"/> </span> </pri_spans> </configuration>
default.xml <?xml version="1.0" encoding="utf-8"?> <!-- http://wiki.freeswitch.org/wiki/Dialplan_XML --> <include> <context name="default"> <extension name="Long Distance - wanpipe"> <condition field="destination_number" expression="^9(\d {5,15})$"> <action application="set" data="dialed_ext=$1"/> <action application="bridge" data="OpenZAP/1/a/$ {dialed_ext}"/> </condition> </extension> </context> </include>
After starting the freeswitch . In console i type oz dump 1 a
my status before calling is:
span_id: 1 chan_id: 16 physical_span_id: 1 physical_chan_id: 16 type: DQ921 state: UP last_state: DOWN cid_date: cid_name: cid_num: ani: aniII: dnis: rdnis: cause: NONE
my (oz dump 1 a) status After calling is:
span_id: 1 chan_id: 16 physical_span_id: 1 physical_chan_id: 16 type: DQ921 state: UP last_state: DOWN cid_date: cid_name: cid_num: ani: aniII: dnis: rdnis: cause: NONE
But while i try to make a outbound call continously, i am getting following error
[08 02 00 00 4e 18 03 a1 83 81 79 01 80]
2008-09-23 01:05:50 [DEBUG] Span:0 Q.931() Sending message to Layer4 (size: 119) 2008-09-23 01:05:50 [DEBUG] ozmod_isdn.c:319 zap_isdn_931_34() Yay I got an event! Type:[46] Size:[119] CRV: 0 (0, CTX: Originator) 2008-09-23 01:05:50 [DEBUG] ozmod_isdn.c:351 zap_isdn_931_34() zchan 0 (-1:-1) source isdn_data->channels_remote_crv[0] 2008-09-23 01:05:50 [DEBUG] ozmod_isdn.c:399 zap_isdn_931_34() Changing state on 1:1 from DOWN to RESTART 2008-09-23 01:05:50 [DEBUG] Span:0 Q.931() Sending message to Q.921 (size: 119) 2008-09-23 01:05:50 [DEBUG] Span:0 Q.931() Creating Q.931 Message Header: ProtDisc 8 (0x8), CRV 0 (0), CRVflag: 0 (0), MesType: 78 (0x4e) 2008-09-23 01:05:50 [DEBUG] ozmod_isdn.c:1499 q931_rx_32() WRITE 13 ---------------------------------------------------------------------- ---------- [08 02 00 00 4e 18 03 a1 83 81 79 01 80]
2008-09-23 01:05:50 [DEBUG] ozmod_isdn.c:796 state_advance() 1:1 STATE [RESTART] 2008-09-23 01:05:50 [DEBUG] mod_openzap.c:1368 on_clear_channel_signal() got clear channel sig [RESTART] 2008-09-23 01:05:50 [DEBUG] ozmod_isdn.c:882 state_advance() Changing state on 1:1 from RESTART to DOWN 2008-09-23 01:05:50 [DEBUG] ozmod_isdn.c:796 state_advance() 1:1 STATE [DOWN] 2008-09-23 01:05:50 [DEBUG] zap_io.c:1088 zap_channel_done() channel done 1:1
--
Thanks & Regards, Palanivel.S
_______________________________________________ Freeswitch-users mailing list Freeswitch-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch- users http://www.freeswitch.org
-- Anthony Minessale II
FreeSWITCH http://www.freeswitch.org/ ClueCon http://www.cluecon.com/
AIM: anthm MSN:anthony_minessale@hotmail.com GTALK/JABBER/PAYPAL:anthony.minessale@gmail.com IRC: irc.freenode.net #freeswitch
FreeSWITCH Developer Conference sip:888@conference.freeswitch.org iax:guest@conference.freeswitch.org/888 googletalk:conf+888@conference.freeswitch.org pstn:213-799-1400
_______________________________________________ Freeswitch-users mailing list Freeswitch-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch- users http://www.freeswitch.org
--
Thanks & Regards, Palanivel.S _______________________________________________ Freeswitch-users mailing list Freeswitch-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch- users http://www.freeswitch.org
-- Anthony Minessale II
FreeSWITCH http://www.freeswitch.org/ ClueCon http://www.cluecon.com/
AIM: anthm MSN:anthony_minessale@hotmail.com GTALK/JABBER/PAYPAL:anthony.minessale@gmail.com IRC: irc.freenode.net #freeswitch
FreeSWITCH Developer Conference sip:888@conference.freeswitch.org iax:guest@conference.freeswitch.org/888 googletalk:conf+888@conference.freeswitch.org pstn:213-799-1400 _______________________________________________ Freeswitch-users mailing list Freeswitch-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch- users http://www.freeswitch.org
We didn't make jira, It's a commercial solution that gives free license to open source projects. You could probably request the feature from them but if it is possible I have never known about it. I always click the link at the top of the emails which puts you in the issue's main page so you can fill in comments. On Thu, Sep 25, 2008 at 1:18 PM, Martin Joseph <astmac@stillnewt.org> wrote:
On Sep 23, 2008, at 7:13 AM, Anthony Minessale wrote:
I have moved your issue to http://jira.freeswitch.org/browse/ OPENZAP-18 since it's an openzap issue and not a build system issue.
Please pay attention to the emails you receive regarding the issue and promptly reply to any comments.
I must say that when I posted to the Jira and received emails regarding my input, it was quite annoying that my responses to the emails went to the bit bucket?
I think it would be really helpful if the emails about Jira posts could be replied to and then the replies could be incorporated back into the Jira or at least reach the Jira admin.
It a minimum making it much clearer that the emails cannot be replied to and providing a link to the appropriate place to reply in the Jira would be great.
Just a thought, Marty
On Tue, Sep 23, 2008 at 9:01 AM, palani sivagurunathan <palani.sivagurunathan@gmail.com> wrote:
Antony,
Thanks for the reply .I have posted in http:// jira.freeswitch.org/browse/FSBUILD-79
Thanks & Regards, Palanivel.S
On 9/22/08, Anthony Minessale <anthony.minessale@gmail.com> wrote: That shows the other end is sending a RESTART command. Can you make a trace of the debug log on the console or the logfile from mod_logfile showing the calls working and then on to when you get the issue including the several failed call attempts in their entirety and post them to http://jira.freeswitch.org under the openzap category.
On Mon, Sep 22, 2008 at 9:29 AM, palani sivagurunathan <palani.sivagurunathan@gmail.com> wrote:
Hi,
I have installed freeswitch through SVN in centos.OutBound is working fine .But not always .Once we make 8 to 10 call from a sip extension we get service unavailable error in xlite . Error and configuration are pasted below .we observed the problem is getting rectified after 5 to 10 mins .and we are able to make calls and again after 8 to 10 calls Errors happen
how to check. what will be the issue
my configuration is:
wanpipe1.conf
[devices] wanpipe1 = WAN_AFT_TE1, Comment
[interfaces] w1g1 = wanpipe1, , TDM_VOICE_API, Comment
[wanpipe1] CARD_TYPE = AFT S514CPU = A CommPort = PRI AUTO_PCISLOT = NO PCISLOT = 9 PCIBUS = 0 FE_MEDIA = E1 FE_LCODE = HDB3 FE_FRAME = CRC4 FE_LINE = 1 TE_CLOCK = NORMAL TE_REF_CLOCK = 0 TE_SIG_MODE = CCS TE_HIGHIMPEDANCE = NO LBO = 120OH FE_TXTRISTATE = NO MTU = 1500 UDPPORT = 9000 TTL = 255 IGNORE_FRONT_END = NO TDMV_SPAN = 1 TDMV_DCHAN = 16 TDMV_HW_DTMF = NO
[w1g1] ACTIVE_CH = ALL TDMV_ECHO_OFF = NO TDMV_HWEC = YES MTU = 80
openzap.conf
[span wanpipe] name => OpenZAP number => 1 trunk_type => E1 b-channel => 1:1-15 d-channel => 1:16 b-channel => 1:17-31
openzap.conf.xml
<configuration name="openzap.conf" description="OpenZAP Configuration"> <settings> <param name="debug" value="0"/> </settings> <pri_spans> <span id="1"> <param name="mode" value="user"/> <param name="dialect" value="euro"/> <param name="dialplan" value="XML"/> <param name="context" value="default"/> </span> </pri_spans> </configuration>
default.xml <?xml version="1.0" encoding="utf-8"?> <!-- http://wiki.freeswitch.org/wiki/Dialplan_XML --> <include> <context name="default"> <extension name="Long Distance - wanpipe"> <condition field="destination_number" expression="^9(\d {5,15})$"> <action application="set" data="dialed_ext=$1"/> <action application="bridge" data="OpenZAP/1/a/$ {dialed_ext}"/> </condition> </extension> </context> </include>
After starting the freeswitch . In console i type oz dump 1 a
my status before calling is:
span_id: 1 chan_id: 16 physical_span_id: 1 physical_chan_id: 16 type: DQ921 state: UP last_state: DOWN cid_date: cid_name: cid_num: ani: aniII: dnis: rdnis: cause: NONE
my (oz dump 1 a) status After calling is:
span_id: 1 chan_id: 16 physical_span_id: 1 physical_chan_id: 16 type: DQ921 state: UP last_state: DOWN cid_date: cid_name: cid_num: ani: aniII: dnis: rdnis: cause: NONE
But while i try to make a outbound call continously, i am getting following error
[08 02 00 00 4e 18 03 a1 83 81 79 01 80]
2008-09-23 01:05:50 [DEBUG] Span:0 Q.931() Sending message to Layer4 (size: 119) 2008-09-23 01:05:50 [DEBUG] ozmod_isdn.c:319 zap_isdn_931_34() Yay I got an event! Type:[46] Size:[119] CRV: 0 (0, CTX: Originator) 2008-09-23 01:05:50 [DEBUG] ozmod_isdn.c:351 zap_isdn_931_34() zchan 0 (-1:-1) source isdn_data->channels_remote_crv[0] 2008-09-23 01:05:50 [DEBUG] ozmod_isdn.c:399 zap_isdn_931_34() Changing state on 1:1 from DOWN to RESTART 2008-09-23 01:05:50 [DEBUG] Span:0 Q.931() Sending message to Q.921 (size: 119) 2008-09-23 01:05:50 [DEBUG] Span:0 Q.931() Creating Q.931 Message Header: ProtDisc 8 (0x8), CRV 0 (0), CRVflag: 0 (0), MesType: 78 (0x4e) 2008-09-23 01:05:50 [DEBUG] ozmod_isdn.c:1499 q931_rx_32() WRITE 13 ---------------------------------------------------------------------- ---------- [08 02 00 00 4e 18 03 a1 83 81 79 01 80]
2008-09-23 01:05:50 [DEBUG] ozmod_isdn.c:796 state_advance() 1:1 STATE [RESTART] 2008-09-23 01:05:50 [DEBUG] mod_openzap.c:1368 on_clear_channel_signal() got clear channel sig [RESTART] 2008-09-23 01:05:50 [DEBUG] ozmod_isdn.c:882 state_advance() Changing state on 1:1 from RESTART to DOWN 2008-09-23 01:05:50 [DEBUG] ozmod_isdn.c:796 state_advance() 1:1 STATE [DOWN] 2008-09-23 01:05:50 [DEBUG] zap_io.c:1088 zap_channel_done() channel done 1:1
--
Thanks & Regards, Palanivel.S
_______________________________________________ Freeswitch-users mailing list Freeswitch-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch- users http://www.freeswitch.org
-- Anthony Minessale II
FreeSWITCH http://www.freeswitch.org/ ClueCon http://www.cluecon.com/
AIM: anthm MSN:anthony_minessale@hotmail.com <MSN%3Aanthony_minessale@hotmail.com> GTALK/JABBER/PAYPAL:anthony.minessale@gmail.com<PAYPAL%3Aanthony.minessale@gmail.com> IRC: irc.freenode.net #freeswitch
FreeSWITCH Developer Conference sip:888@conference.freeswitch.org <sip%3A888@conference.freeswitch.org> iax:guest@conference.freeswitch.org/888 googletalk:conf+888@conference.freeswitch.org<googletalk%3Aconf%2B888@conference.freeswitch.org> pstn:213-799-1400
_______________________________________________ Freeswitch-users mailing list Freeswitch-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch- users http://www.freeswitch.org
--
Thanks & Regards, Palanivel.S _______________________________________________ Freeswitch-users mailing list Freeswitch-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch- users http://www.freeswitch.org
-- Anthony Minessale II
FreeSWITCH http://www.freeswitch.org/ ClueCon http://www.cluecon.com/
AIM: anthm MSN:anthony_minessale@hotmail.com <MSN%3Aanthony_minessale@hotmail.com> GTALK/JABBER/PAYPAL:anthony.minessale@gmail.com<PAYPAL%3Aanthony.minessale@gmail.com> IRC: irc.freenode.net #freeswitch
FreeSWITCH Developer Conference sip:888@conference.freeswitch.org <sip%3A888@conference.freeswitch.org> iax:guest@conference.freeswitch.org/888 googletalk:conf+888@conference.freeswitch.org<googletalk%3Aconf%2B888@conference.freeswitch.org> pstn:213-799-1400 _______________________________________________ Freeswitch-users mailing list Freeswitch-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch- users http://www.freeswitch.org
_______________________________________________ Freeswitch-users mailing list Freeswitch-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- Anthony Minessale II FreeSWITCH http://www.freeswitch.org/ ClueCon http://www.cluecon.com/ AIM: anthm MSN:anthony_minessale@hotmail.com <MSN%3Aanthony_minessale@hotmail.com> GTALK/JABBER/PAYPAL:anthony.minessale@gmail.com<PAYPAL%3Aanthony.minessale@gmail.com> IRC: irc.freenode.net #freeswitch FreeSWITCH Developer Conference sip:888@conference.freeswitch.org <sip%3A888@conference.freeswitch.org> iax:guest@conference.freeswitch.org/888 googletalk:conf+888@conference.freeswitch.org<googletalk%3Aconf%2B888@conference.freeswitch.org> pstn:213-799-1400
-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 H Anthony, I have same problem on each 7th outgoing call. Then a sort of timeout occurs. During that time, no incomming call is possible. regards helmut Am 23.09.2008 16:13, schrieb Anthony Minessale:
I have moved your issue to http://jira.freeswitch.org/browse/OPENZAP-18 since it's an openzap issue and not a build system issue.
Please pay attention to the emails you receive regarding the issue and promptly reply to any comments.
-----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.9 (MingW32) iEYEARECAAYFAklHy8sACgkQ4tZeNddg3dynXgCeLco/4Pmu3hFVVFHP/glucTtS o4oAoIo1q2bA5ItCwGx4y9kZsy1KPWlp =Rv7D -----END PGP SIGNATURE-----
-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hello again, hm the bug OPENZAP-18 is not really the same problem as I have. OZ-18 is about network congestion while mine is about a pri blocking timeout on every 7th outgoing call. So, shall I open a seperate bug on jira? regards helmut Am 16.12.2008 16:39, schrieb Helmut Kuper:
H Anthony,
I have same problem on each 7th outgoing call. Then a sort of timeout occurs. During that time, no incomming call is possible.
regards helmut -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.9 (MingW32)
iEYEARECAAYFAklH2uEACgkQ4tZeNddg3dxZ1ACgs5wZKty2kvzbqa57NONhJ67R 0ugAnj1kX0w1wI45zjeouVz7VMA3d1UN =H2ic -----END PGP SIGNATURE-----
Yes please. Also, if you can attach some debug information, preferably reproducing the symptoms with the full debug turned on (F8) and attach it as a file that would assist with the research. -MC On Tue, Dec 16, 2008 at 8:44 AM, Helmut Kuper <helmut.kuper@ewetel.de> wrote:
-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1
Hello again,
hm the bug OPENZAP-18 is not really the same problem as I have. OZ-18 is about network congestion while mine is about a pri blocking timeout on every 7th outgoing call. So, shall I open a seperate bug on jira?
regards helmut
Am 16.12.2008 16:39, schrieb Helmut Kuper:
H Anthony,
I have same problem on each 7th outgoing call. Then a sort of timeout occurs. During that time, no incomming call is possible.
regards helmut -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.9 (MingW32)
iEYEARECAAYFAklH2uEACgkQ4tZeNddg3dxZ1ACgs5wZKty2kvzbqa57NONhJ67R 0ugAnj1kX0w1wI45zjeouVz7VMA3d1UN =H2ic -----END PGP SIGNATURE-----
_______________________________________________ Freeswitch-users mailing list Freeswitch-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
It looks like the other side is not responding at all to the setup message so the span is locked waiting to see which channel should be assigned. There is a mutex here stopping the span from using any more channels until it gets a reply to that setup message. We could either lower the 60 second timeout to a smaller val, unlock the mutex before we make the call (possible race condition) or figure out why you are getting no reply at all from your setup message. On Tue, Dec 16, 2008 at 11:00 AM, Michael Collins <msc@freeswitch.org>wrote:
Yes please. Also, if you can attach some debug information, preferably reproducing the symptoms with the full debug turned on (F8) and attach it as a file that would assist with the research.
-MC
On Tue, Dec 16, 2008 at 8:44 AM, Helmut Kuper <helmut.kuper@ewetel.de> wrote:
-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1
Hello again,
hm the bug OPENZAP-18 is not really the same problem as I have. OZ-18 is about network congestion while mine is about a pri blocking timeout on every 7th outgoing call. So, shall I open a seperate bug on jira?
regards helmut
Am 16.12.2008 16:39, schrieb Helmut Kuper:
H Anthony,
I have same problem on each 7th outgoing call. Then a sort of timeout occurs. During that time, no incomming call is possible.
regards helmut -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.9 (MingW32)
iEYEARECAAYFAklH2uEACgkQ4tZeNddg3dxZ1ACgs5wZKty2kvzbqa57NONhJ67R 0ugAnj1kX0w1wI45zjeouVz7VMA3d1UN =H2ic -----END PGP SIGNATURE-----
_______________________________________________ Freeswitch-users mailing list Freeswitch-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ Freeswitch-users mailing list Freeswitch-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- Anthony Minessale II FreeSWITCH http://www.freeswitch.org/ ClueCon http://www.cluecon.com/ AIM: anthm MSN:anthony_minessale@hotmail.com <MSN%3Aanthony_minessale@hotmail.com> GTALK/JABBER/PAYPAL:anthony.minessale@gmail.com<PAYPAL%3Aanthony.minessale@gmail.com> IRC: irc.freenode.net #freeswitch FreeSWITCH Developer Conference sip:888@conference.freeswitch.org <sip%3A888@conference.freeswitch.org> iax:guest@conference.freeswitch.org/888 googletalk:conf+888@conference.freeswitch.org<googletalk%3Aconf%2B888@conference.freeswitch.org> pstn:213-799-1400
-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi Anthony, yes I agree, but hey, the other side is a matured EWSD unlikely that there is an issue left on protocol level after 30 years. I check that tomorrow. regards helmut Am 16.12.2008 18:35, schrieb Anthony Minessale:
It looks like the other side is not responding at all to the setup message so the span is locked waiting to see which channel should be assigned. There is a mutex here stopping the span from using any more channels until it gets a reply to that setup message.
We could either lower the 60 second timeout to a smaller val, unlock the mutex before we make the call (possible race condition) or figure out why you are getting no reply at all from your setup message.
On Tue, Dec 16, 2008 at 11:00 AM, Michael Collins <msc@freeswitch.org>wrote:
Yes please. Also, if you can attach some debug information, preferably reproducing the symptoms with the full debug turned on (F8) and attach it as a file that would assist with the research.
-MC
On Tue, Dec 16, 2008 at 8:44 AM, Helmut Kuper <helmut.kuper@ewetel.de> wrote: Hello again,
hm the bug OPENZAP-18 is not really the same problem as I have. OZ-18 is about network congestion while mine is about a pri blocking timeout on every 7th outgoing call. So, shall I open a seperate bug on jira?
regards helmut
Am 16.12.2008 16:39, schrieb Helmut Kuper:
H Anthony,
I have same problem on each 7th outgoing call. Then a sort of timeout occurs. During that time, no incomming call is possible.
regards helmut
Freeswitch-users mailing list Freeswitch-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ Freeswitch-users mailing list Freeswitch-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
------------------------------------------------------------------------
_______________________________________________ Freeswitch-users mailing list Freeswitch-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.9 (MingW32)
iEYEARECAAYFAklH67IACgkQ4tZeNddg3dyuyQCeJYjTLdCCWjE3pIrFnwbw/cY2 ZP4AoIFVFdWEPuIcy0Lbi5yhZ4/4sT/5 =Q1vB -----END PGP SIGNATURE-----
yes I doubt your EWSD is doing anything wrong, but the communication channel must be interrupted somehow to never get any replies so yes we can try to figure out what has gone wrong in the communication layer. On Tue, Dec 16, 2008 at 11:56 AM, Helmut Kuper <helmut.kuper@ewetel.de>wrote:
-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1
Hi Anthony,
yes I agree, but hey, the other side is a matured EWSD unlikely that there is an issue left on protocol level after 30 years. I check that tomorrow.
regards helmut
Am 16.12.2008 18:35, schrieb Anthony Minessale:
It looks like the other side is not responding at all to the setup message so the span is locked waiting to see which channel should be assigned. There is a mutex here stopping the span from using any more channels until it gets a reply to that setup message.
We could either lower the 60 second timeout to a smaller val, unlock the mutex before we make the call (possible race condition) or figure out why you are getting no reply at all from your setup message.
On Tue, Dec 16, 2008 at 11:00 AM, Michael Collins <msc@freeswitch.org wrote:
Yes please. Also, if you can attach some debug information, preferably reproducing the symptoms with the full debug turned on (F8) and attach it as a file that would assist with the research.
-MC
On Tue, Dec 16, 2008 at 8:44 AM, Helmut Kuper <helmut.kuper@ewetel.de> wrote: Hello again,
hm the bug OPENZAP-18 is not really the same problem as I have. OZ-18 is about network congestion while mine is about a pri blocking timeout on every 7th outgoing call. So, shall I open a seperate bug on jira?
regards helmut
Am 16.12.2008 16:39, schrieb Helmut Kuper:
H Anthony,
I have same problem on each 7th outgoing call. Then a sort of timeout occurs. During that time, no incomming call is possible.
regards helmut
Freeswitch-users mailing list Freeswitch-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ Freeswitch-users mailing list Freeswitch-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE: http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
------------------------------------------------------------------------
_______________________________________________ Freeswitch-users mailing list Freeswitch-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.9 (MingW32)
iEYEARECAAYFAklH67IACgkQ4tZeNddg3dyuyQCeJYjTLdCCWjE3pIrFnwbw/cY2 ZP4AoIFVFdWEPuIcy0Lbi5yhZ4/4sT/5 =Q1vB -----END PGP SIGNATURE-----
_______________________________________________ Freeswitch-users mailing list Freeswitch-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- Anthony Minessale II FreeSWITCH http://www.freeswitch.org/ ClueCon http://www.cluecon.com/ AIM: anthm MSN:anthony_minessale@hotmail.com <MSN%3Aanthony_minessale@hotmail.com> GTALK/JABBER/PAYPAL:anthony.minessale@gmail.com<PAYPAL%3Aanthony.minessale@gmail.com> IRC: irc.freenode.net #freeswitch FreeSWITCH Developer Conference sip:888@conference.freeswitch.org <sip%3A888@conference.freeswitch.org> iax:guest@conference.freeswitch.org/888 googletalk:conf+888@conference.freeswitch.org<googletalk%3Aconf%2B888@conference.freeswitch.org> pstn:213-799-1400
-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi, I updated the jira bug. I did a Q931/Q921 trace. Currently there is no direct hint, that FS is doing something wrong. NT side is just not anwering the SETUP of FS, buuut, I was asked if FS is able to allow NT side the channel management, so NT says what channel is to use instead of FS. Can FS do this? If so, how can I configure that? Analyzing the trace throws a new bug: Sometimes our EWSD finds a checksum errors in FS's RR messages. more here: http://jira.freeswitch.org/browse/OPENZAP-40 If one of FS board wants the whole decoded trace just raise your hand. regards Helmut -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.9 (MingW32) iEYEARECAAYFAklJEnIACgkQ4tZeNddg3dxIdwCbBbTw7a3bG/mnVvVmDSpbH5Bw SU0AniHPV4qTIpuI8ENclxXyOn6pcueR =Ey+M -----END PGP SIGNATURE-----
try <param name="suggest-channel" value="true"/> in the <span> in openzap.conf.xml On Wed, Dec 17, 2008 at 8:53 AM, Helmut Kuper <helmut.kuper@ewetel.de>wrote:
-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1
Hi,
I updated the jira bug. I did a Q931/Q921 trace. Currently there is no direct hint, that FS is doing something wrong. NT side is just not anwering the SETUP of FS, buuut, I was asked if FS is able to allow NT side the channel management, so NT says what channel is to use instead of FS.
Can FS do this? If so, how can I configure that?
Analyzing the trace throws a new bug: Sometimes our EWSD finds a checksum errors in FS's RR messages.
more here: http://jira.freeswitch.org/browse/OPENZAP-40
If one of FS board wants the whole decoded trace just raise your hand.
regards Helmut -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.9 (MingW32)
iEYEARECAAYFAklJEnIACgkQ4tZeNddg3dxIdwCbBbTw7a3bG/mnVvVmDSpbH5Bw SU0AniHPV4qTIpuI8ENclxXyOn6pcueR =Ey+M -----END PGP SIGNATURE-----
_______________________________________________ Freeswitch-users mailing list Freeswitch-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- Anthony Minessale II FreeSWITCH http://www.freeswitch.org/ ClueCon http://www.cluecon.com/ AIM: anthm MSN:anthony_minessale@hotmail.com <MSN%3Aanthony_minessale@hotmail.com> GTALK/JABBER/PAYPAL:anthony.minessale@gmail.com<PAYPAL%3Aanthony.minessale@gmail.com> IRC: irc.freenode.net #freeswitch FreeSWITCH Developer Conference sip:888@conference.freeswitch.org <sip%3A888@conference.freeswitch.org> iax:guest@conference.freeswitch.org/888 googletalk:conf+888@conference.freeswitch.org<googletalk%3Aconf%2B888@conference.freeswitch.org> pstn:213-799-1400
-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi Anthony, thx, but that doesn't work very good. Outgoing calls ring only once and then this error rises in console: 2008-12-17 16:23:19 [DEBUG] Span:0 Q.931() Sending message to Layer4 (size: 103) 2008-12-17 16:23:19 [DEBUG] ozmod_isdn.c:320 zap_isdn_931_34() Yay I got an event! Type:[02] Size:[103] CRV: 7 (0x7, CTX: Terminator) 2008-12-17 16:23:19 [DEBUG] ozmod_isdn.c:352 zap_isdn_931_34() zchan 810f590 (1:1) source isdn_data->channels_local_crv[0x7] 2008-12-17 16:23:19 [CRIT] ozmod_isdn.c:701 zap_isdn_931_34() Received CALL PROCEEDING message for channel 0 2008-12-17 16:23:19 [DEBUG] ozmod_isdn.c:702 zap_isdn_931_34() Changing state on 1:1 from DIALING to PROGRESS regards Helmut -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.9 (MingW32) iEYEARECAAYFAklJGw4ACgkQ4tZeNddg3dyeoACfeM6hYQF45T2gg18RQsOpZIjS SB0AoIQp+ixmWUGBKyMFXIZQ6AbQsWK0 =I2L3 -----END PGP SIGNATURE-----
Helmut, Can you turn on full debug and capture the output? It's a lot so put it in a pastebin. -MC Sent from my iPhone On Dec 17, 2008, at 7:30 AM, Helmut Kuper <helmut.kuper@ewetel.de> wrote:
-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1
Hi Anthony,
thx, but that doesn't work very good. Outgoing calls ring only once and then this error rises in console:
2008-12-17 16:23:19 [DEBUG] Span:0 Q.931() Sending message to Layer4 (size: 103) 2008-12-17 16:23:19 [DEBUG] ozmod_isdn.c:320 zap_isdn_931_34() Yay I got an event! Type:[02] Size:[103] CRV: 7 (0x7, CTX: Terminator) 2008-12-17 16:23:19 [DEBUG] ozmod_isdn.c:352 zap_isdn_931_34() zchan 810f590 (1:1) source isdn_data->channels_local_crv[0x7] 2008-12-17 16:23:19 [CRIT] ozmod_isdn.c:701 zap_isdn_931_34() Received CALL PROCEEDING message for channel 0 2008-12-17 16:23:19 [DEBUG] ozmod_isdn.c:702 zap_isdn_931_34() Changing state on 1:1 from DIALING to PROGRESS
regards Helmut -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.9 (MingW32)
iEYEARECAAYFAklJGw4ACgkQ4tZeNddg3dyeoACfeM6hYQF45T2gg18RQsOpZIjS SB0AoIQp+ixmWUGBKyMFXIZQ6AbQsWK0 =I2L3 -----END PGP SIGNATURE-----
_______________________________________________ Freeswitch-users mailing list Freeswitch-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
participants (6)
-
Anthony Minessale
-
Helmut Kuper
-
Martin Joseph
-
Michael Collins
-
Michael S Collins
-
palani sivagurunathan