Hi all, I've been playing with FS around weeks, with some level of success. Right now I'm stuck trying to dial an extension, or to bridge a call to an external extension. Briefly, the scenario is the following: - Cisco CCM forwarding SIP calls to FS - FS in outbound mode, forwarding calls to a Java application using freeswitch-esl jar The java application answers the call, says a dialogue using TTS and receives input using DTFM or speech commands; all this is working pretty well. Now I'm trying to put this call in hold, originate a call to another extension and, depending on the result (call answered, not answered, destination user presses an specific number generating an expected DTMF), I need to bridge both calls and finish the session. I try several ways to get this done with no luck yet: using api originate to make the call with different arguments ({ignore_early_media, etc). I even tried to skip this step and just do the bridge between the inbound call and the external extension, but this didn't work either. I can't see any errors thrown by FS, and the result of the command is +OK, but nothing happens, the external phone never rings. The FS log only says: [DEBUG] switch_core_session.c:954 Send signal sofia/external/5655@192.168.8.1 [BREAK] <= this ext/IP address is from the inbound caller, not the one I'm trying to connect to. My first impression was that I might have something wrong with the originate/bridge parameters. I changed the dialplan XML file to just do the bridge, and it worked like a charm. <include> <extension name="test"> <condition field="destination_number" expression="6114|5121"> <!-- <action application="socket" data="localhost:8044 async full"/> --> <action application="bridge" data="sofia/external/5562@192.168.2.14" /> </condition> </extension> </include> I don't know what path to follow here. I was unable to find relevant examples on google that guides me to solve this little issue. Can somebody please give me some advice? Thanks all, Hector