3Com 3102 (3C10402B) Phone with FreeSwitch
Help please . . . . Is anyone using the 3Com 3102 (3C10402B) Phone with FreeSwitch ? I have got FreeSwitch up and running with the SoftPhone, but can't get a 3Com hardware phone to talk to FreeSwitch. I have the phone getting its IP Address from DHCP and it can see the FreeSwitch server but I can't find anything in the phone to allow the extension & password to be configured. Can FreeSwitch send this data to the phone (and if so, which configuration files are involved) or must the phone be configured manually before it can talk to FreeSwitch ? Any help would be really appreciated as I'm pulling my hair out here ! Regards Dave
you might read this before you bigin :P http://support.3com.com/documents/asterisk/Asterisk_TeleGd_Business_AB.pdf T. On Tue, Nov 3, 2009 at 6:30 PM, Dave Stevenson <stevendt@primrosebank.net>wrote:
Help please . . . .
Is anyone using the 3Com 3102 (3C10402B) Phone with FreeSwitch ?
I have got FreeSwitch up and running with the SoftPhone, but can't get a 3Com hardware phone to talk to FreeSwitch. I have the phone getting its IP Address from DHCP and it can see the FreeSwitch server but I can't find anything in the phone to allow the extension & password to be configured. Can FreeSwitch send this data to the phone (and if so, which configuration files are involved) or must the phone be configured manually before it can talk to FreeSwitch ?
Any help would be really appreciated as I'm pulling my hair out here !
Regards Dave
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
Tihomir, thanks for the link, but actually, I had already found/downloaded/read and almost understood that document ! However, the options to log into the phone and configure the extension number etc. do not appear on my phone.
From reading another post on the web, I don't think that the phone has the SIP software loaded until it is downloaded from the Server - I think that there is a "special" version of Asterix for 3Com that does this, maybe the same functionality does not exist in FreeSwitch ?
Maybe I should have been clearer in the post below, but I think that this is the root of the problem. I think that the 3Com phone is looking for the Switch to download the SIP firmware to it and FreeSwitch does not seem to do that. Given that you have pointed me in the direction of that document, are you using 3Com Phones with FreeSwitch ? If so, I'm obviously on the wrong track, but please let me know how you've made it work regards Dave ----- Original Message ----- From: Tihomir Culjaga To: freeswitch-users@lists.freeswitch.org Sent: Tuesday, November 03, 2009 7:53 PM Subject: Re: [Freeswitch-users] 3Com 3102 (3C10402B) Phone with FreeSwitch you might read this before you bigin :P http://support.3com.com/documents/asterisk/Asterisk_TeleGd_Business_AB.pdf T. On Tue, Nov 3, 2009 at 6:30 PM, Dave Stevenson <stevendt@primrosebank.net> wrote: Help please . . . . Is anyone using the 3Com 3102 (3C10402B) Phone with FreeSwitch ? I have got FreeSwitch up and running with the SoftPhone, but can't get a 3Com hardware phone to talk to FreeSwitch. I have the phone getting its IP Address from DHCP and it can see the FreeSwitch server but I can't find anything in the phone to allow the extension & password to be configured. Can FreeSwitch send this data to the phone (and if so, which configuration files are involved) or must the phone be configured manually before it can talk to FreeSwitch ? Any help would be really appreciated as I'm pulling my hair out here ! Regards Dave _______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org ------------------------------------------------------------------------------ _______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
I think you are most likely on the wrong track, 3COM phones are locked to either 3COM PBX or the special Asterisk edition locked-down by 3COM. You cannot make them work with either FreeSWITCH or any other open SIP server other than 3COM IP PBX systems. I learned this over one year ago by playing with 3COm 3102 phones myself. Chris On Tue, Nov 3, 2009 at 3:03 PM, Dave Stevenson <stevendt@primrosebank.net>wrote:
Tihomir,
thanks for the link, but actually, I had already found/downloaded/read and almost understood that document !
However, the options to log into the phone and configure the extension number etc. do not appear on my phone.
From reading another post on the web, I don't think that the phone has the SIP software loaded until it is downloaded from the Server - I think that there is a "special" version of Asterix for 3Com that does this, maybe the same functionality does not exist in FreeSwitch ?
Maybe I should have been clearer in the post below, but I think that this is the root of the problem. I think that the 3Com phone is looking for the Switch to download the SIP firmware to it and FreeSwitch does not seem to do that.
Given that you have pointed me in the direction of that document, are you using 3Com Phones with FreeSwitch ? If so, I'm obviously on the wrong track, but please let me know how you've made it work
regards Dave
----- Original Message ----- *From:* Tihomir Culjaga <tculjaga@gmail.com> *To:* freeswitch-users@lists.freeswitch.org *Sent:* Tuesday, November 03, 2009 7:53 PM *Subject:* Re: [Freeswitch-users] 3Com 3102 (3C10402B) Phone with FreeSwitch
you might read this before you bigin :P
http://support.3com.com/documents/asterisk/Asterisk_TeleGd_Business_AB.pdf
T.
On Tue, Nov 3, 2009 at 6:30 PM, Dave Stevenson <stevendt@primrosebank.net>wrote:
Help please . . . .
Is anyone using the 3Com 3102 (3C10402B) Phone with FreeSwitch ?
I have got FreeSwitch up and running with the SoftPhone, but can't get a 3Com hardware phone to talk to FreeSwitch. I have the phone getting its IP Address from DHCP and it can see the FreeSwitch server but I can't find anything in the phone to allow the extension & password to be configured. Can FreeSwitch send this data to the phone (and if so, which configuration files are involved) or must the phone be configured manually before it can talk to FreeSwitch ?
Any help would be really appreciated as I'm pulling my hair out here !
Regards Dave
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
------------------------------
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
Chris, thanks a lot for the response. It's not the answer that I wanted, but it is what I was coming round to thinking. As much as I'm disappointed (particularly as I've just got the phone), but at least it's a definitive answer and I can avoid wasting any more time with it, so thanks again. Oh well, off to try and find some open SIP phones that will actually work for me, regards Dave ----- Original Message ----- From: Chris Chen To: freeswitch-users@lists.freeswitch.org Sent: Tuesday, November 03, 2009 8:18 PM Subject: Re: [Freeswitch-users] 3Com 3102 (3C10402B) Phone with FreeSwitch I think you are most likely on the wrong track, 3COM phones are locked to either 3COM PBX or the special Asterisk edition locked-down by 3COM. You cannot make them work with either FreeSWITCH or any other open SIP server other than 3COM IP PBX systems. I learned this over one year ago by playing with 3COm 3102 phones myself. Chris On Tue, Nov 3, 2009 at 3:03 PM, Dave Stevenson <stevendt@primrosebank.net> wrote: Tihomir, thanks for the link, but actually, I had already found/downloaded/read and almost understood that document ! However, the options to log into the phone and configure the extension number etc. do not appear on my phone. From reading another post on the web, I don't think that the phone has the SIP software loaded until it is downloaded from the Server - I think that there is a "special" version of Asterix for 3Com that does this, maybe the same functionality does not exist in FreeSwitch ? Maybe I should have been clearer in the post below, but I think that this is the root of the problem. I think that the 3Com phone is looking for the Switch to download the SIP firmware to it and FreeSwitch does not seem to do that. Given that you have pointed me in the direction of that document, are you using 3Com Phones with FreeSwitch ? If so, I'm obviously on the wrong track, but please let me know how you've made it work regards Dave ----- Original Message ----- From: Tihomir Culjaga To: freeswitch-users@lists.freeswitch.org Sent: Tuesday, November 03, 2009 7:53 PM Subject: Re: [Freeswitch-users] 3Com 3102 (3C10402B) Phone with FreeSwitch you might read this before you bigin :P http://support.3com.com/documents/asterisk/Asterisk_TeleGd_Business_AB.pdf T. On Tue, Nov 3, 2009 at 6:30 PM, Dave Stevenson <stevendt@primrosebank.net> wrote: Help please . . . . Is anyone using the 3Com 3102 (3C10402B) Phone with FreeSwitch ? I have got FreeSwitch up and running with the SoftPhone, but can't get a 3Com hardware phone to talk to FreeSwitch. I have the phone getting its IP Address from DHCP and it can see the FreeSwitch server but I can't find anything in the phone to allow the extension & password to be configured. Can FreeSwitch send this data to the phone (and if so, which configuration files are involved) or must the phone be configured manually before it can talk to FreeSwitch ? Any help would be really appreciated as I'm pulling my hair out here ! Regards Dave _______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org -------------------------------------------------------------------------- _______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org _______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org ------------------------------------------------------------------------------ _______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
Hi again, sorry to be here again ! OK, now that I know that 3Com phones and FreeSwitch don't mix, my next question is about Cisco ! I see that the FreeSwitch Interoperability list includes Cisco phones such as the 7940 and 7960. I believe that these phones need user licenses to work with Cisco Call Manager. What I'd like to confirm is that I would not need any Cisco licenses or anything else to get a Cisco IP phone working with FreeSwitch. Again, I'd really appreciate feedback from anyone using either of these (or other) Cisco phones with FreeSwitch on whether any additional licenses or software are required to work with an "out of the box" FreeSwitch installation ? regards Dave
Any of the Cisco phones with a SIP image should work fine ... no license required. SDR Dave Stevenson wrote:
Hi again,
sorry to be here again !
OK, now that I know that 3Com phones and FreeSwitch don't mix, my next question is about Cisco !
I see that the FreeSwitch Interoperability list includes Cisco phones such as the 7940 and 7960.
I believe that these phones need user licenses to work with Cisco Call Manager.
What I'd like to confirm is that I would not need any Cisco licenses or anything else to get a Cisco IP phone working with FreeSwitch.
Again, I'd really appreciate feedback from anyone using either of these (or other) Cisco phones with FreeSwitch on whether any additional licenses or software are required to work with an "out of the box" FreeSwitch installation ?
regards Dave ------------------------------------------------------------------------
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
Cisco 7960 and the like that they push on the enterprise level for call manager also can be flashed with sip based firmware. I've only used the 7960 with the sip firmware. SPA942 and the like that used to be under Linksys/Sipura before that are targeted more toward smaller businesses and run SIP out of the box without any license complications. -- W
Thanks a lot - to both William and Shelby, that makes me more confident about trying out at least one Cisco and Rupa has just given me a few more options, so, hopefully, I won't make the 3Com mistake again ! regards Dave ----- Original Message ----- From: "William Suffill" <william.suffill@gmail.com> To: <freeswitch-users@lists.freeswitch.org> Sent: Tuesday, November 03, 2009 9:10 PM Subject: Re: [Freeswitch-users] IP Phones with FreeSwitch
Cisco 7960 and the like that they push on the enterprise level for call manager also can be flashed with sip based firmware. I've only used the 7960 with the sip firmware.
SPA942 and the like that used to be under Linksys/Sipura before that are targeted more toward smaller businesses and run SIP out of the box without any license complications.
-- W
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
FYI, you can't do "presence" with the Cisco phones, so you can't see if someone is on the phone. -----Original Message----- From: freeswitch-users-bounces@lists.freeswitch.org [mailto:freeswitch-users-bounces@lists.freeswitch.org] On Behalf Of Dave Stevenson Sent: Tuesday, November 03, 2009 3:29 PM To: freeswitch-users@lists.freeswitch.org Subject: Re: [Freeswitch-users] IP Phones with FreeSwitch Thanks a lot - to both William and Shelby, that makes me more confident about trying out at least one Cisco and Rupa has just given me a few more options, so, hopefully, I won't make the 3Com mistake again ! regards Dave ----- Original Message ----- From: "William Suffill" <william.suffill@gmail.com> To: <freeswitch-users@lists.freeswitch.org> Sent: Tuesday, November 03, 2009 9:10 PM Subject: Re: [Freeswitch-users] IP Phones with FreeSwitch
Cisco 7960 and the like that they push on the enterprise level for call manager also can be flashed with sip based firmware. I've only used the 7960 with the sip firmware.
SPA942 and the like that used to be under Linksys/Sipura before that are targeted more toward smaller businesses and run SIP out of the box without any license complications.
-- W
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
These phones work with FS, come by irc and you can talk to sekil about his use of them. In general, if you haven't invested in a bunch of phones, I'd recommend: Polycom 330,450,550 -- pick your price point snom - again, pick your price point These are generally well supported over the rest. On Tue, Nov 3, 2009 at 2:57 PM, Dave Stevenson <stevendt@primrosebank.net> wrote:
Hi again,
sorry to be here again !
OK, now that I know that 3Com phones and FreeSwitch don't mix, my next question is about Cisco !
I see that the FreeSwitch Interoperability list includes Cisco phones such as the 7940 and 7960.
I believe that these phones need user licenses to work with Cisco Call Manager.
What I'd like to confirm is that I would not need any Cisco licenses or anything else to get a Cisco IP phone working with FreeSwitch.
Again, I'd really appreciate feedback from anyone using either of these (or other) Cisco phones with FreeSwitch on whether any additional licenses or software are required to work with an "out of the box" FreeSwitch installation ?
regards Dave _______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- -Rupa
Rupa, thanks a lot for the pointers - I'm just about to try to pick up some phones, so the tips are timely. Actually, I have been trying the IRC thing today, but keep getting "connection refused", it's been a few years since I used IRC, but I think I have a Firewall problem that I'm working on. Hopefully, I'll be there soon, regards Dave ----- Original Message ----- From: "Rupa Schomaker" <rupa@rupa.com> To: <freeswitch-users@lists.freeswitch.org> Sent: Tuesday, November 03, 2009 9:19 PM Subject: Re: [Freeswitch-users] IP Phones with FreeSwitch
These phones work with FS, come by irc and you can talk to sekil about his use of them.
In general, if you haven't invested in a bunch of phones, I'd recommend:
Polycom 330,450,550 -- pick your price point snom - again, pick your price point
These are generally well supported over the rest.
On Tue, Nov 3, 2009 at 2:57 PM, Dave Stevenson <stevendt@primrosebank.net> wrote:
Hi again,
sorry to be here again !
OK, now that I know that 3Com phones and FreeSwitch don't mix, my next question is about Cisco !
I see that the FreeSwitch Interoperability list includes Cisco phones such as the 7940 and 7960.
I believe that these phones need user licenses to work with Cisco Call Manager.
What I'd like to confirm is that I would not need any Cisco licenses or anything else to get a Cisco IP phone working with FreeSwitch.
Again, I'd really appreciate feedback from anyone using either of these (or other) Cisco phones with FreeSwitch on whether any additional licenses or software are required to work with an "out of the box" FreeSwitch installation ?
regards Dave _______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- -Rupa
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
pity,the phone looks quite nice... On Tue, Nov 3, 2009 at 9:18 PM, Chris Chen <chris.chen2004@gmail.com> wrote:
I think you are most likely on the wrong track, 3COM phones are locked to either 3COM PBX or the special Asterisk edition locked-down by 3COM. You cannot make them work with either FreeSWITCH or any other open SIP server other than 3COM IP PBX systems. I learned this over one year ago by playing with 3COm 3102 phones myself.
Chris
On Tue, Nov 3, 2009 at 3:03 PM, Dave Stevenson <stevendt@primrosebank.net>wrote:
Tihomir,
thanks for the link, but actually, I had already found/downloaded/read and almost understood that document !
However, the options to log into the phone and configure the extension number etc. do not appear on my phone.
From reading another post on the web, I don't think that the phone has the SIP software loaded until it is downloaded from the Server - I think that there is a "special" version of Asterix for 3Com that does this, maybe the same functionality does not exist in FreeSwitch ?
Maybe I should have been clearer in the post below, but I think that this is the root of the problem. I think that the 3Com phone is looking for the Switch to download the SIP firmware to it and FreeSwitch does not seem to do that.
Given that you have pointed me in the direction of that document, are you using 3Com Phones with FreeSwitch ? If so, I'm obviously on the wrong track, but please let me know how you've made it work
regards Dave
----- Original Message ----- *From:* Tihomir Culjaga <tculjaga@gmail.com> *To:* freeswitch-users@lists.freeswitch.org *Sent:* Tuesday, November 03, 2009 7:53 PM *Subject:* Re: [Freeswitch-users] 3Com 3102 (3C10402B) Phone with FreeSwitch
you might read this before you bigin :P
http://support.3com.com/documents/asterisk/Asterisk_TeleGd_Business_AB.pdf
T.
On Tue, Nov 3, 2009 at 6:30 PM, Dave Stevenson <stevendt@primrosebank.net
wrote:
Help please . . . .
Is anyone using the 3Com 3102 (3C10402B) Phone with FreeSwitch ?
I have got FreeSwitch up and running with the SoftPhone, but can't get a 3Com hardware phone to talk to FreeSwitch. I have the phone getting its IP Address from DHCP and it can see the FreeSwitch server but I can't find anything in the phone to allow the extension & password to be configured. Can FreeSwitch send this data to the phone (and if so, which configuration files are involved) or must the phone be configured manually before it can talk to FreeSwitch ?
Any help would be really appreciated as I'm pulling my hair out here !
Regards Dave
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
------------------------------
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
well, if it is a sip phone than you should be able to input your username&password somewhere. Usually, SIP phones downloads their configuration using dhcp/tftp|http method... the FW is downloaded just once if you need to upgrade the phone... I don't have any of these phones on my desk, just found the manual on the web. anyhow, freeswitch is expecting a SIP phone to register and thats it :P ... there is no specific phone provisioning from FS side. T. On Tue, Nov 3, 2009 at 9:03 PM, Dave Stevenson <stevendt@primrosebank.net>wrote:
Tihomir,
thanks for the link, but actually, I had already found/downloaded/read and almost understood that document !
However, the options to log into the phone and configure the extension number etc. do not appear on my phone.
From reading another post on the web, I don't think that the phone has the SIP software loaded until it is downloaded from the Server - I think that there is a "special" version of Asterix for 3Com that does this, maybe the same functionality does not exist in FreeSwitch ?
Maybe I should have been clearer in the post below, but I think that this is the root of the problem. I think that the 3Com phone is looking for the Switch to download the SIP firmware to it and FreeSwitch does not seem to do that.
Given that you have pointed me in the direction of that document, are you using 3Com Phones with FreeSwitch ? If so, I'm obviously on the wrong track, but please let me know how you've made it work
regards Dave
----- Original Message ----- *From:* Tihomir Culjaga <tculjaga@gmail.com> *To:* freeswitch-users@lists.freeswitch.org *Sent:* Tuesday, November 03, 2009 7:53 PM *Subject:* Re: [Freeswitch-users] 3Com 3102 (3C10402B) Phone with FreeSwitch
you might read this before you bigin :P
http://support.3com.com/documents/asterisk/Asterisk_TeleGd_Business_AB.pdf
T.
On Tue, Nov 3, 2009 at 6:30 PM, Dave Stevenson <stevendt@primrosebank.net>wrote:
Help please . . . .
Is anyone using the 3Com 3102 (3C10402B) Phone with FreeSwitch ?
I have got FreeSwitch up and running with the SoftPhone, but can't get a 3Com hardware phone to talk to FreeSwitch. I have the phone getting its IP Address from DHCP and it can see the FreeSwitch server but I can't find anything in the phone to allow the extension & password to be configured. Can FreeSwitch send this data to the phone (and if so, which configuration files are involved) or must the phone be configured manually before it can talk to FreeSwitch ?
Any help would be really appreciated as I'm pulling my hair out here !
Regards Dave
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
------------------------------
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
participants (7)
-
Chris Chen
-
Dave Stevenson
-
Peder
-
Rupa Schomaker
-
Shelby Ramsey
-
Tihomir Culjaga
-
William Suffill