Please see the attached file. On Tue, Oct 19, 2010 at 4:16 PM, Michael Collins <msc@freeswitch.org> wrote:

Latest PAP2T firmware is not required, but you might as well update.

Factory reset the PAP2T before you do anything else, just in case there are legacy settings in there. I have only used a PAP2T on a CudaTel and not actually on a straight FS install. However it did not seem overly complicated if you are familiar with the PAP2T configs. If someone has a sample config please post to the list here and we'll put it up on the wiki.

-MC

On Mon, Oct 18, 2010 at 11:39 AM, Charles Bujold <cjbujold@accra.ca>wrote:

...

Trying to connect a Linksys PAP2T-NA ATA to Freeswitch and trying to find a configuration example and settings to make it work. If anybody has a suggestion please forward it. Also do I need to upgrade the firmware of the Pap2T to the latest version for it to work with Freeswitch (v5.16)?

Thanks

*cjb*

_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org

_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org

It should be exactly the same as any other setup.... /b On Oct 19, 2010, at 6:16 PM, Michael Collins wrote:

Latest PAP2T firmware is not required, but you might as well update.

Factory reset the PAP2T before you do anything else, just in case there are legacy settings in there. I have only used a PAP2T on a CudaTel and not actually on a straight FS install. However it did not seem overly complicated if you are familiar with the PAP2T configs. If someone has a sample config please post to the list here and we'll put it up on the wiki.

-MC