Re: [Freeswitch-users] Hardware requirement for 1000 Calls
Hi, I have developed few future and interface and some modification in old version of freeswitch so my modification is not working in 1.6. This is reason to use old. Its not possible for me to again develop all those changes in new version. I tried in new version but didn't worked so I have only option to use 1.4. Please advise server. Thanks Uday. On Sep 10, 2016 10:55 PM, "Michael Jerris" <mike@jerris.com> wrote: Why would you use an old unsupported version? On Saturday, September 10, 2016, Uday kumar <udy786@gmail.com> wrote:
Hi All,
I need your help to setup Freeswitch server for 1000 concurrent call on CentOS. Freeswitch version 1.4.26 for below modules:-
*1.* Conference *2.* CallCenter:- In CallCenter Module will use ring group, queue etc. *3.* Extension to extension Calls, Extention to Mobile/Landline call using SIP. *4.* IVR *5.* Recording:- Record all Calls (Conference, CallCenter, Extension, IVR etc) *6.* To tracking RTP, use tool Voipmonitor. *7. *For security iptables. *8.* Database is MySQL.
To make outgoing and incoming calls will configure multiple Carrier provider and DID.
*Please suggest server configuration for above setup and also how much Internet speed is required. *
*Currently I have one dedicated server in cloud with below configuration. *
*Intel(R) Xeon ** @ 3.30GHz* *12GB RAM* *8MB Casche* *500GB HDD with 7k RPM*
*Please suggest if this is capable to handle above requirements. *
-- Thanks & Regard Uday Site:- www.shareyourknowledge.in Mobile:- +91-9377579349
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
If you have patch freeswitch you should pdat those patches so that the original authors can review them. This is your obligation under the license Sent from my iPhone
On Sep 10, 2016, at 2:31 PM, Uday kumar <udy786@gmail.com> wrote:
Hi,
I have developed few future and interface and some modification in old version of freeswitch so my modification is not working in 1.6. This is reason to use old. Its not possible for me to again develop all those changes in new version. I tried in new version but didn't worked so I have only option to use 1.4.
Please advise server.
Thanks Uday.
On Sep 10, 2016 10:55 PM, "Michael Jerris" <mike@jerris.com> wrote: Why would you use an old unsupported version?
On Saturday, September 10, 2016, Uday kumar <udy786@gmail.com> wrote: Hi All,
I need your help to setup Freeswitch server for 1000 concurrent call on CentOS. Freeswitch version 1.4.26 for below modules:-
1. Conference 2. CallCenter:- In CallCenter Module will use ring group, queue etc. 3. Extension to extension Calls, Extention to Mobile/Landline call using SIP. 4. IVR 5. Recording:- Record all Calls (Conference, CallCenter, Extension, IVR etc) 6. To tracking RTP, use tool Voipmonitor. 7. For security iptables. 8. Database is MySQL.
To make outgoing and incoming calls will configure multiple Carrier provider and DID.
Please suggest server configuration for above setup and also how much Internet speed is required.
Currently I have one dedicated server in cloud with below configuration.
Intel(R) Xeon @ 3.30GHz 12GB RAM 8MB Casche 500GB HDD with 7k RPM
Please suggest if this is capable to handle above requirements.
-- Thanks & Regard Uday Site:- www.shareyourknowledge.in Mobile:- +91-9377579349
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
I have not done any patch or core modification. Developed interface to access those functional from interface. I need information to setup server in such senior that I included above. On Sep 11, 2016 1:32 AM, "Ken Rice" <krice@freeswitch.org> wrote:
If you have patch freeswitch you should pdat those patches so that the original authors can review them. This is your obligation under the license
Sent from my iPhone
On Sep 10, 2016, at 2:31 PM, Uday kumar <udy786@gmail.com> wrote:
Hi,
I have developed few future and interface and some modification in old version of freeswitch so my modification is not working in 1.6. This is reason to use old. Its not possible for me to again develop all those changes in new version. I tried in new version but didn't worked so I have only option to use 1.4.
Please advise server.
Thanks Uday.
On Sep 10, 2016 10:55 PM, "Michael Jerris" <mike@jerris.com> wrote:
Why would you use an old unsupported version?
On Saturday, September 10, 2016, Uday kumar <udy786@gmail.com> wrote:
Hi All,
I need your help to setup Freeswitch server for 1000 concurrent call on CentOS. Freeswitch version 1.4.26 for below modules:-
*1.* Conference *2.* CallCenter:- In CallCenter Module will use ring group, queue etc. *3.* Extension to extension Calls, Extention to Mobile/Landline call using SIP. *4.* IVR *5.* Recording:- Record all Calls (Conference, CallCenter, Extension, IVR etc) *6.* To tracking RTP, use tool Voipmonitor. *7. *For security iptables. *8.* Database is MySQL.
To make outgoing and incoming calls will configure multiple Carrier provider and DID.
*Please suggest server configuration for above setup and also how much Internet speed is required. *
*Currently I have one dedicated server in cloud with below configuration. *
*Intel(R) Xeon ** @ 3.30GHz* *12GB RAM* *8MB Casche* *500GB HDD with 7k RPM*
*Please suggest if this is capable to handle above requirements. *
-- Thanks & Regard Uday Site:- www.shareyourknowledge.in Mobile:- +91-9377579349
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
Impossible for someone to guess what hardware you need without knowing more about your application. Your best bet would be contacting consulting@freeswitch.org<mailto:consulting@freeswitch.org>, they would be glad to help. Thanks, Moishe Grunstein Tornado Computer Systems, Inc. 212.400.7650 888.IPPBX.US Service Request Email: support@nysolutions.com<mailto:support@nysolutions.com> [cid:image001.jpg@01C72F94.9EE45D60]<http://www.nysolutions.com/> Computer Networking * Managed Services * IP Video Surveillance * Network Assessments * Web Solutions * Voice over IP * Disaster Recovery * Network Security * Site Surveys * CMS From: freeswitch-users-bounces@lists.freeswitch.org [mailto:freeswitch-users-bounces@lists.freeswitch.org] On Behalf Of Uday kumar Sent: Saturday, September 10, 2016 4:30 PM To: FreeSWITCH Users Help <freeswitch-users@lists.freeswitch.org> Subject: Re: [Freeswitch-users] Hardware requirement for 1000 Calls I have not done any patch or core modification. Developed interface to access those functional from interface. I need information to setup server in such senior that I included above. On Sep 11, 2016 1:32 AM, "Ken Rice" <krice@freeswitch.org<mailto:krice@freeswitch.org>> wrote: If you have patch freeswitch you should pdat those patches so that the original authors can review them. This is your obligation under the license Sent from my iPhone On Sep 10, 2016, at 2:31 PM, Uday kumar <udy786@gmail.com<mailto:udy786@gmail.com>> wrote: Hi, I have developed few future and interface and some modification in old version of freeswitch so my modification is not working in 1.6. This is reason to use old. Its not possible for me to again develop all those changes in new version. I tried in new version but didn't worked so I have only option to use 1.4. Please advise server. Thanks Uday. On Sep 10, 2016 10:55 PM, "Michael Jerris" <mike@jerris.com<mailto:mike@jerris.com>> wrote: Why would you use an old unsupported version? On Saturday, September 10, 2016, Uday kumar <udy786@gmail.com<mailto:udy786@gmail.com>> wrote: Hi All, I need your help to setup Freeswitch server for 1000 concurrent call on CentOS. Freeswitch version 1.4.26 for below modules:- 1. Conference 2. CallCenter:- In CallCenter Module will use ring group, queue etc. 3. Extension to extension Calls, Extention to Mobile/Landline call using SIP. 4. IVR 5. Recording:- Record all Calls (Conference, CallCenter, Extension, IVR etc) 6. To tracking RTP, use tool Voipmonitor. 7. For security iptables. 8. Database is MySQL. To make outgoing and incoming calls will configure multiple Carrier provider and DID. Please suggest server configuration for above setup and also how much Internet speed is required. Currently I have one dedicated server in cloud with below configuration. Intel(R) Xeon @ 3.30GHz 12GB RAM 8MB Casche 500GB HDD with 7k RPM Please suggest if this is capable to handle above requirements. -- Thanks & Regard Uday Site:- www.shareyourknowledge.in<http://www.shareyourknowledge.in/> Mobile:- +91-9377579349<tel:%2B91-9377579349> _________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org<mailto:consulting@freeswitch.org> http://www.freeswitchsolutions.com Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org<mailto:FreeSWITCH-users@lists.freeswitch.org> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org _________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org<mailto:consulting@freeswitch.org> http://www.freeswitchsolutions.com Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org<mailto:FreeSWITCH-users@lists.freeswitch.org> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users<http://lists.freeswitch.org/mailman/options/freeswitch-users> http://www.freeswitch.org _________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org<mailto:consulting@freeswitch.org> http://www.freeswitchsolutions.com Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org<mailto:FreeSWITCH-users@lists.freeswitch.org> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
Actually Ken, the MIT license allows you to do almost anything you want with modified code. There's no obligation to publish the changes. Even the Gnu GPL doesn't obligate to publish the changes, it only allows anyone to publish them for you )) On 10 Sep 2016 22:02, "Ken Rice" <krice@freeswitch.org> wrote:
If you have patch freeswitch you should pdat those patches so that the original authors can review them. This is your obligation under the license
Sent from my iPhone
On Sep 10, 2016, at 2:31 PM, Uday kumar <udy786@gmail.com> wrote:
Hi,
I have developed few future and interface and some modification in old version of freeswitch so my modification is not working in 1.6. This is reason to use old. Its not possible for me to again develop all those changes in new version. I tried in new version but didn't worked so I have only option to use 1.4.
Please advise server.
Thanks Uday.
On Sep 10, 2016 10:55 PM, "Michael Jerris" <mike@jerris.com> wrote:
Why would you use an old unsupported version?
On Saturday, September 10, 2016, Uday kumar <udy786@gmail.com> wrote:
Hi All,
I need your help to setup Freeswitch server for 1000 concurrent call on CentOS. Freeswitch version 1.4.26 for below modules:-
*1.* Conference *2.* CallCenter:- In CallCenter Module will use ring group, queue etc. *3.* Extension to extension Calls, Extention to Mobile/Landline call using SIP. *4.* IVR *5.* Recording:- Record all Calls (Conference, CallCenter, Extension, IVR etc) *6.* To tracking RTP, use tool Voipmonitor. *7. *For security iptables. *8.* Database is MySQL.
To make outgoing and incoming calls will configure multiple Carrier provider and DID.
*Please suggest server configuration for above setup and also how much Internet speed is required. *
*Currently I have one dedicated server in cloud with below configuration. *
*Intel(R) Xeon ** @ 3.30GHz* *12GB RAM* *8MB Casche* *500GB HDD with 7k RPM*
*Please suggest if this is capable to handle above requirements. *
-- Thanks & Regard Uday Site:- www.shareyourknowledge.in Mobile:- +91-9377579349
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
Going back to the original discussion why not to install multiple FS servers and add a Load balancer to distribute the call load. (Kamailio Opensource SIP proxy) Regardless of your testing relying on a single server is not a good idea for 1K CPS production infrastructure. Definitely you should be the one testing 1K simultaneous calls per second and all the features you described, many tools to do this (SIPP, Asterisk, ESL interface) On Sun, Sep 11, 2016 at 5:36 PM, Stanislav Sinyagin <ssinyagin@gmail.com> wrote:
Actually Ken, the MIT license allows you to do almost anything you want with modified code. There's no obligation to publish the changes.
Even the Gnu GPL doesn't obligate to publish the changes, it only allows anyone to publish them for you ))
On 10 Sep 2016 22:02, "Ken Rice" <krice@freeswitch.org> wrote:
If you have patch freeswitch you should pdat those patches so that the original authors can review them. This is your obligation under the license
Sent from my iPhone
On Sep 10, 2016, at 2:31 PM, Uday kumar <udy786@gmail.com> wrote:
Hi,
I have developed few future and interface and some modification in old version of freeswitch so my modification is not working in 1.6. This is reason to use old. Its not possible for me to again develop all those changes in new version. I tried in new version but didn't worked so I have only option to use 1.4.
Please advise server.
Thanks Uday.
On Sep 10, 2016 10:55 PM, "Michael Jerris" <mike@jerris.com> wrote:
Why would you use an old unsupported version?
On Saturday, September 10, 2016, Uday kumar <udy786@gmail.com> wrote:
Hi All,
I need your help to setup Freeswitch server for 1000 concurrent call on CentOS. Freeswitch version 1.4.26 for below modules:-
*1.* Conference *2.* CallCenter:- In CallCenter Module will use ring group, queue etc. *3.* Extension to extension Calls, Extention to Mobile/Landline call using SIP. *4.* IVR *5.* Recording:- Record all Calls (Conference, CallCenter, Extension, IVR etc) *6.* To tracking RTP, use tool Voipmonitor. *7. *For security iptables. *8.* Database is MySQL.
To make outgoing and incoming calls will configure multiple Carrier provider and DID.
*Please suggest server configuration for above setup and also how much Internet speed is required. *
*Currently I have one dedicated server in cloud with below configuration. *
*Intel(R) Xeon ** @ 3.30GHz* *12GB RAM* *8MB Casche* *500GB HDD with 7k RPM*
*Please suggest if this is capable to handle above requirements. *
-- Thanks & Regard Uday Site:- www.shareyourknowledge.in Mobile:- +91-9377579349
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
What does the mit or the gpl have to do with freeswitch? Sent from my iPhone
On Sep 11, 2016, at 7:36 PM, Stanislav Sinyagin <ssinyagin@gmail.com> wrote:
Actually Ken, the MIT license allows you to do almost anything you want with modified code. There's no obligation to publish the changes.
Even the Gnu GPL doesn't obligate to publish the changes, it only allows anyone to publish them for you ))
On 10 Sep 2016 22:02, "Ken Rice" <krice@freeswitch.org> wrote: If you have patch freeswitch you should pdat those patches so that the original authors can review them. This is your obligation under the license
Sent from my iPhone
On Sep 10, 2016, at 2:31 PM, Uday kumar <udy786@gmail.com> wrote:
Hi,
I have developed few future and interface and some modification in old version of freeswitch so my modification is not working in 1.6. This is reason to use old. Its not possible for me to again develop all those changes in new version. I tried in new version but didn't worked so I have only option to use 1.4.
Please advise server.
Thanks Uday.
On Sep 10, 2016 10:55 PM, "Michael Jerris" <mike@jerris.com> wrote: Why would you use an old unsupported version?
On Saturday, September 10, 2016, Uday kumar <udy786@gmail.com> wrote: Hi All,
I need your help to setup Freeswitch server for 1000 concurrent call on CentOS. Freeswitch version 1.4.26 for below modules:-
1. Conference 2. CallCenter:- In CallCenter Module will use ring group, queue etc. 3. Extension to extension Calls, Extention to Mobile/Landline call using SIP. 4. IVR 5. Recording:- Record all Calls (Conference, CallCenter, Extension, IVR etc) 6. To tracking RTP, use tool Voipmonitor. 7. For security iptables. 8. Database is MySQL.
To make outgoing and incoming calls will configure multiple Carrier provider and DID.
Please suggest server configuration for above setup and also how much Internet speed is required.
Currently I have one dedicated server in cloud with below configuration.
Intel(R) Xeon @ 3.30GHz 12GB RAM 8MB Casche 500GB HDD with 7k RPM
Please suggest if this is capable to handle above requirements.
-- Thanks & Regard Uday Site:- www.shareyourknowledge.in Mobile:- +91-9377579349
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
I would like to see future versions of FreeSWITCH support load balancing out the box somehow, without ever needing Kamailio. On Sun, Sep 11, 2016 at 8:57 PM, Ken Rice <krice@freeswitch.org> wrote:
What does the mit or the gpl have to do with freeswitch?
Sent from my iPhone
On Sep 11, 2016, at 7:36 PM, Stanislav Sinyagin <ssinyagin@gmail.com> wrote:
Actually Ken, the MIT license allows you to do almost anything you want with modified code. There's no obligation to publish the changes.
Even the Gnu GPL doesn't obligate to publish the changes, it only allows anyone to publish them for you ))
On 10 Sep 2016 22:02, "Ken Rice" <krice@freeswitch.org> wrote:
If you have patch freeswitch you should pdat those patches so that the original authors can review them. This is your obligation under the license
Sent from my iPhone
On Sep 10, 2016, at 2:31 PM, Uday kumar <udy786@gmail.com> wrote:
Hi,
I have developed few future and interface and some modification in old version of freeswitch so my modification is not working in 1.6. This is reason to use old. Its not possible for me to again develop all those changes in new version. I tried in new version but didn't worked so I have only option to use 1.4.
Please advise server.
Thanks Uday.
On Sep 10, 2016 10:55 PM, "Michael Jerris" <mike@jerris.com> wrote:
Why would you use an old unsupported version?
On Saturday, September 10, 2016, Uday kumar <udy786@gmail.com> wrote:
Hi All,
I need your help to setup Freeswitch server for 1000 concurrent call on CentOS. Freeswitch version 1.4.26 for below modules:-
*1.* Conference *2.* CallCenter:- In CallCenter Module will use ring group, queue etc. *3.* Extension to extension Calls, Extention to Mobile/Landline call using SIP. *4.* IVR *5.* Recording:- Record all Calls (Conference, CallCenter, Extension, IVR etc) *6.* To tracking RTP, use tool Voipmonitor. *7. *For security iptables. *8.* Database is MySQL.
To make outgoing and incoming calls will configure multiple Carrier provider and DID.
*Please suggest server configuration for above setup and also how much Internet speed is required. *
*Currently I have one dedicated server in cloud with below configuration. *
*Intel(R) Xeon ** @ 3.30GHz* *12GB RAM* *8MB Casche* *500GB HDD with 7k RPM*
*Please suggest if this is capable to handle above requirements. *
-- Thanks & Regard Uday Site:- www.shareyourknowledge.in Mobile:- +91-9377579349
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- Sincerely, Don Hawkins CEO Hawkins Enterprise Group LLC http://hawkinsegroup.com Zello PTT <http://zello.com>: push2don P: 469-214-5044
You can without Kamailio, you can use Postgresql Multimaster replication for the FS DB. https://wiki.postgresql.org/wiki/BDR_Quick_Start Thanks, Moishe Grunstein Tornado Computer Systems, Inc. 212.400.7650 888.IPPBX.US Service Request Email: support@nysolutions.com<mailto:support@nysolutions.com> [cid:image001.jpg@01C72F94.9EE45D60]<http://www.nysolutions.com/> Computer Networking * Managed Services * IP Video Surveillance * Network Assessments * Web Solutions * Voice over IP * Disaster Recovery * Network Security * Site Surveys * CMS From: freeswitch-users-bounces@lists.freeswitch.org [mailto:freeswitch-users-bounces@lists.freeswitch.org] On Behalf Of Don Hawkins Sent: Sunday, September 11, 2016 10:45 PM To: FreeSWITCH Users Help <freeswitch-users@lists.freeswitch.org> Subject: Re: [Freeswitch-users] Hardware requirement for 1000 Calls I would like to see future versions of FreeSWITCH support load balancing out the box somehow, without ever needing Kamailio. On Sun, Sep 11, 2016 at 8:57 PM, Ken Rice <krice@freeswitch.org<mailto:krice@freeswitch.org>> wrote: What does the mit or the gpl have to do with freeswitch? Sent from my iPhone On Sep 11, 2016, at 7:36 PM, Stanislav Sinyagin <ssinyagin@gmail.com<mailto:ssinyagin@gmail.com>> wrote: Actually Ken, the MIT license allows you to do almost anything you want with modified code. There's no obligation to publish the changes. Even the Gnu GPL doesn't obligate to publish the changes, it only allows anyone to publish them for you )) On 10 Sep 2016 22:02, "Ken Rice" <krice@freeswitch.org<mailto:krice@freeswitch.org>> wrote: If you have patch freeswitch you should pdat those patches so that the original authors can review them. This is your obligation under the license Sent from my iPhone On Sep 10, 2016, at 2:31 PM, Uday kumar <udy786@gmail.com<mailto:udy786@gmail.com>> wrote: Hi, I have developed few future and interface and some modification in old version of freeswitch so my modification is not working in 1.6. This is reason to use old. Its not possible for me to again develop all those changes in new version. I tried in new version but didn't worked so I have only option to use 1.4. Please advise server. Thanks Uday. On Sep 10, 2016 10:55 PM, "Michael Jerris" <mike@jerris.com<mailto:mike@jerris.com>> wrote: Why would you use an old unsupported version? On Saturday, September 10, 2016, Uday kumar <udy786@gmail.com<mailto:udy786@gmail.com>> wrote: Hi All, I need your help to setup Freeswitch server for 1000 concurrent call on CentOS. Freeswitch version 1.4.26 for below modules:- 1. Conference 2. CallCenter:- In CallCenter Module will use ring group, queue etc. 3. Extension to extension Calls, Extention to Mobile/Landline call using SIP. 4. IVR 5. Recording:- Record all Calls (Conference, CallCenter, Extension, IVR etc) 6. To tracking RTP, use tool Voipmonitor. 7. For security iptables. 8. Database is MySQL. To make outgoing and incoming calls will configure multiple Carrier provider and DID. Please suggest server configuration for above setup and also how much Internet speed is required. Currently I have one dedicated server in cloud with below configuration. Intel(R) Xeon @ 3.30GHz 12GB RAM 8MB Casche 500GB HDD with 7k RPM Please suggest if this is capable to handle above requirements. -- Thanks & Regard Uday Site:- www.shareyourknowledge.in<http://www.shareyourknowledge.in/> Mobile:- +91-9377579349<tel:%2B91-9377579349> _________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org<mailto:consulting@freeswitch.org> http://www.freeswitchsolutions.com Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org<mailto:FreeSWITCH-users@lists.freeswitch.org> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org _________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org<mailto:consulting@freeswitch.org> http://www.freeswitchsolutions.com Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org<mailto:FreeSWITCH-users@lists.freeswitch.org> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users<http://lists.freeswitch.org/mailman/options/freeswitch-users> http://www.freeswitch.org _________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org<mailto:consulting@freeswitch.org> http://www.freeswitchsolutions.com Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org<mailto:FreeSWITCH-users@lists.freeswitch.org> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org _________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org<mailto:consulting@freeswitch.org> http://www.freeswitchsolutions.com Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org<mailto:FreeSWITCH-users@lists.freeswitch.org> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users<http://lists.freeswitch.org/mailman/options/freeswitch-users> http://www.freeswitch.org _________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org<mailto:consulting@freeswitch.org> http://www.freeswitchsolutions.com Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org<mailto:FreeSWITCH-users@lists.freeswitch.org> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org -- Sincerely, Don Hawkins CEO Hawkins Enterprise Group LLC http://hawkinsegroup.com Zello PTT<http://zello.com>: push2don P: 469-214-5044
That would replicate the database for sure (allow two servers to use it). However, all of our call flow is handled off site with a database already so technically two FS servers could already go live, problem is each has it's own IP (different address for registering SIP clients). I'm thinking more along the lines of load balancing. If FS server 1 has 500 calls already then send the next call to FS server 2. Many web host (Linode in my case) offer load balancing, but I'm not sure if they support UDP, seems like only TCP. On Sun, Sep 11, 2016 at 10:00 PM, Moishe Grunstein <max@nysolutions.com> wrote:
You can without Kamailio, you can use Postgresql Multimaster replication for the FS DB. https://wiki.postgresql.org/wiki/BDR_Quick_Start
Thanks,
Moishe Grunstein
Tornado Computer Systems, Inc.
212.400.7650 888.IPPBX.US *Service Request Email: support@nysolutions.com <support@nysolutions.com> *
[image: cid:image001.jpg@01C72F94.9EE45D60] <http://www.nysolutions.com/>
Computer Networking * Managed Services * IP Video Surveillance * Network Assessments * Web Solutions * Voice over IP * Disaster Recovery * Network Security * Site Surveys * CMS
*From:* freeswitch-users-bounces@lists.freeswitch.org [mailto: freeswitch-users-bounces@lists.freeswitch.org] *On Behalf Of *Don Hawkins *Sent:* Sunday, September 11, 2016 10:45 PM *To:* FreeSWITCH Users Help <freeswitch-users@lists.freeswitch.org> *Subject:* Re: [Freeswitch-users] Hardware requirement for 1000 Calls
I would like to see future versions of FreeSWITCH support load balancing out the box somehow, without ever needing Kamailio.
On Sun, Sep 11, 2016 at 8:57 PM, Ken Rice <krice@freeswitch.org> wrote:
What does the mit or the gpl have to do with freeswitch?
Sent from my iPhone
On Sep 11, 2016, at 7:36 PM, Stanislav Sinyagin <ssinyagin@gmail.com> wrote:
Actually Ken, the MIT license allows you to do almost anything you want with modified code. There's no obligation to publish the changes.
Even the Gnu GPL doesn't obligate to publish the changes, it only allows anyone to publish them for you ))
On 10 Sep 2016 22:02, "Ken Rice" <krice@freeswitch.org> wrote:
If you have patch freeswitch you should pdat those patches so that the original authors can review them. This is your obligation under the license
Sent from my iPhone
On Sep 10, 2016, at 2:31 PM, Uday kumar <udy786@gmail.com> wrote:
Hi,
I have developed few future and interface and some modification in old version of freeswitch so my modification is not working in 1.6. This is reason to use old. Its not possible for me to again develop all those changes in new version. I tried in new version but didn't worked so I have only option to use 1.4.
Please advise server.
Thanks Uday.
On Sep 10, 2016 10:55 PM, "Michael Jerris" <mike@jerris.com> wrote:
Why would you use an old unsupported version?
On Saturday, September 10, 2016, Uday kumar <udy786@gmail.com> wrote:
Hi All,
I need your help to setup Freeswitch server for 1000 concurrent call on CentOS. Freeswitch version 1.4.26 for below modules:-
*1.* Conference
*2.* CallCenter:- In CallCenter Module will use ring group, queue etc.
*3.* Extension to extension Calls, Extention to Mobile/Landline call using SIP.
*4.* IVR
*5.* Recording:- Record all Calls (Conference, CallCenter, Extension, IVR etc)
*6.* To tracking RTP, use tool Voipmonitor.
*7. *For security iptables.
*8.* Database is MySQL.
To make outgoing and incoming calls will configure multiple Carrier provider and DID.
*Please suggest server configuration for above setup and also how much Internet speed is required. *
*Currently I have one dedicated server in cloud with below configuration. *
*Intel(R) Xeon @ 3.30GHz*
*12GB RAM*
*8MB Casche*
*500GB HDD with 7k RPM*
*Please suggest if this is capable to handle above requirements. *
--
Thanks & Regard
Uday
Site:- www.shareyourknowledge.in
Mobile:- +91-9377579349
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
--
Sincerely, Don Hawkins CEO Hawkins Enterprise Group LLC http://hawkinsegroup.com Zello PTT <http://zello.com>: push2don
P: 469-214-5044
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- Sincerely, Don Hawkins CEO Hawkins Enterprise Group LLC http://hawkinsegroup.com Zello PTT <http://zello.com>: push2don P: 469-214-5044
You can do that on the DNS level with many DNS providers. Or using srv records. Thanks, Moishe Grunstein Tornado Computer Systems, Inc. 212.400.7650 888.IPPBX.US Service Request Email: support@nysolutions.com<mailto:support@nysolutions.com> [cid:image001.jpg@01C72F94.9EE45D60]<http://www.nysolutions.com/> Computer Networking * Managed Services * IP Video Surveillance * Network Assessments * Web Solutions * Voice over IP * Disaster Recovery * Network Security * Site Surveys * CMS From: freeswitch-users-bounces@lists.freeswitch.org [mailto:freeswitch-users-bounces@lists.freeswitch.org] On Behalf Of Don Hawkins Sent: Sunday, September 11, 2016 11:33 PM To: FreeSWITCH Users Help <freeswitch-users@lists.freeswitch.org> Subject: Re: [Freeswitch-users] Hardware requirement for 1000 Calls That would replicate the database for sure (allow two servers to use it). However, all of our call flow is handled off site with a database already so technically two FS servers could already go live, problem is each has it's own IP (different address for registering SIP clients). I'm thinking more along the lines of load balancing. If FS server 1 has 500 calls already then send the next call to FS server 2. Many web host (Linode in my case) offer load balancing, but I'm not sure if they support UDP, seems like only TCP. On Sun, Sep 11, 2016 at 10:00 PM, Moishe Grunstein <max@nysolutions.com<mailto:max@nysolutions.com>> wrote: You can without Kamailio, you can use Postgresql Multimaster replication for the FS DB. https://wiki.postgresql.org/wiki/BDR_Quick_Start Thanks, Moishe Grunstein Tornado Computer Systems, Inc. 212.400.7650<tel:212.400.7650> 888.IPPBX.US<http://888.IPPBX.US> Service Request Email: support@nysolutions.com<mailto:support@nysolutions.com> [cid:image001.jpg@01C72F94.9EE45D60]<http://www.nysolutions.com/> Computer Networking * Managed Services * IP Video Surveillance * Network Assessments * Web Solutions * Voice over IP * Disaster Recovery * Network Security * Site Surveys * CMS From: freeswitch-users-bounces@lists.freeswitch.org<mailto:freeswitch-users-bounces@lists.freeswitch.org> [mailto:freeswitch-users-bounces@lists.freeswitch.org<mailto:freeswitch-users-bounces@lists.freeswitch.org>] On Behalf Of Don Hawkins Sent: Sunday, September 11, 2016 10:45 PM To: FreeSWITCH Users Help <freeswitch-users@lists.freeswitch.org<mailto:freeswitch-users@lists.freeswitch.org>> Subject: Re: [Freeswitch-users] Hardware requirement for 1000 Calls I would like to see future versions of FreeSWITCH support load balancing out the box somehow, without ever needing Kamailio. On Sun, Sep 11, 2016 at 8:57 PM, Ken Rice <krice@freeswitch.org<mailto:krice@freeswitch.org>> wrote: What does the mit or the gpl have to do with freeswitch? Sent from my iPhone On Sep 11, 2016, at 7:36 PM, Stanislav Sinyagin <ssinyagin@gmail.com<mailto:ssinyagin@gmail.com>> wrote: Actually Ken, the MIT license allows you to do almost anything you want with modified code. There's no obligation to publish the changes. Even the Gnu GPL doesn't obligate to publish the changes, it only allows anyone to publish them for you )) On 10 Sep 2016 22:02, "Ken Rice" <krice@freeswitch.org<mailto:krice@freeswitch.org>> wrote: If you have patch freeswitch you should pdat those patches so that the original authors can review them. This is your obligation under the license Sent from my iPhone On Sep 10, 2016, at 2:31 PM, Uday kumar <udy786@gmail.com<mailto:udy786@gmail.com>> wrote: Hi, I have developed few future and interface and some modification in old version of freeswitch so my modification is not working in 1.6. This is reason to use old. Its not possible for me to again develop all those changes in new version. I tried in new version but didn't worked so I have only option to use 1.4. Please advise server. Thanks Uday. On Sep 10, 2016 10:55 PM, "Michael Jerris" <mike@jerris.com<mailto:mike@jerris.com>> wrote: Why would you use an old unsupported version? On Saturday, September 10, 2016, Uday kumar <udy786@gmail.com<mailto:udy786@gmail.com>> wrote: Hi All, I need your help to setup Freeswitch server for 1000 concurrent call on CentOS. Freeswitch version 1.4.26 for below modules:- 1. Conference 2. CallCenter:- In CallCenter Module will use ring group, queue etc. 3. Extension to extension Calls, Extention to Mobile/Landline call using SIP. 4. IVR 5. Recording:- Record all Calls (Conference, CallCenter, Extension, IVR etc) 6. To tracking RTP, use tool Voipmonitor. 7. For security iptables. 8. Database is MySQL. To make outgoing and incoming calls will configure multiple Carrier provider and DID. Please suggest server configuration for above setup and also how much Internet speed is required. Currently I have one dedicated server in cloud with below configuration. Intel(R) Xeon @ 3.30GHz 12GB RAM 8MB Casche 500GB HDD with 7k RPM Please suggest if this is capable to handle above requirements. -- Thanks & Regard Uday Site:- www.shareyourknowledge.in<http://www.shareyourknowledge.in/> Mobile:- +91-9377579349<tel:%2B91-9377579349> _________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org<mailto:consulting@freeswitch.org> http://www.freeswitchsolutions.com Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org<mailto:FreeSWITCH-users@lists.freeswitch.org> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org _________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org<mailto:consulting@freeswitch.org> http://www.freeswitchsolutions.com Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org<mailto:FreeSWITCH-users@lists.freeswitch.org> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users<http://lists.freeswitch.org/mailman/options/freeswitch-users> http://www.freeswitch.org _________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org<mailto:consulting@freeswitch.org> http://www.freeswitchsolutions.com Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org<mailto:FreeSWITCH-users@lists.freeswitch.org> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org _________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org<mailto:consulting@freeswitch.org> http://www.freeswitchsolutions.com Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org<mailto:FreeSWITCH-users@lists.freeswitch.org> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users<http://lists.freeswitch.org/mailman/options/freeswitch-users> http://www.freeswitch.org _________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org<mailto:consulting@freeswitch.org> http://www.freeswitchsolutions.com Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org<mailto:FreeSWITCH-users@lists.freeswitch.org> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org -- Sincerely, Don Hawkins CEO Hawkins Enterprise Group LLC http://hawkinsegroup.com Zello PTT<http://zello.com>: push2don P: 469-214-5044<tel:469-214-5044> _________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org<mailto:consulting@freeswitch.org> http://www.freeswitchsolutions.com Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org<mailto:FreeSWITCH-users@lists.freeswitch.org> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org -- Sincerely, Don Hawkins CEO Hawkins Enterprise Group LLC http://hawkinsegroup.com Zello PTT<http://zello.com>: push2don P: 469-214-5044
Last time I checked, freeswitch was distributed under MIT license. Has it changed? On 12 Sep 2016 03:59, "Ken Rice" <krice@freeswitch.org> wrote:
What does the mit or the gpl have to do with freeswitch?
Sent from my iPhone
On Sep 11, 2016, at 7:36 PM, Stanislav Sinyagin <ssinyagin@gmail.com> wrote:
Actually Ken, the MIT license allows you to do almost anything you want with modified code. There's no obligation to publish the changes.
Even the Gnu GPL doesn't obligate to publish the changes, it only allows anyone to publish them for you ))
On 10 Sep 2016 22:02, "Ken Rice" <krice@freeswitch.org> wrote:
If you have patch freeswitch you should pdat those patches so that the original authors can review them. This is your obligation under the license
Sent from my iPhone
On Sep 10, 2016, at 2:31 PM, Uday kumar <udy786@gmail.com> wrote:
Hi,
I have developed few future and interface and some modification in old version of freeswitch so my modification is not working in 1.6. This is reason to use old. Its not possible for me to again develop all those changes in new version. I tried in new version but didn't worked so I have only option to use 1.4.
Please advise server.
Thanks Uday.
On Sep 10, 2016 10:55 PM, "Michael Jerris" <mike@jerris.com> wrote:
Why would you use an old unsupported version?
On Saturday, September 10, 2016, Uday kumar <udy786@gmail.com> wrote:
Hi All,
I need your help to setup Freeswitch server for 1000 concurrent call on CentOS. Freeswitch version 1.4.26 for below modules:-
*1.* Conference *2.* CallCenter:- In CallCenter Module will use ring group, queue etc. *3.* Extension to extension Calls, Extention to Mobile/Landline call using SIP. *4.* IVR *5.* Recording:- Record all Calls (Conference, CallCenter, Extension, IVR etc) *6.* To tracking RTP, use tool Voipmonitor. *7. *For security iptables. *8.* Database is MySQL.
To make outgoing and incoming calls will configure multiple Carrier provider and DID.
*Please suggest server configuration for above setup and also how much Internet speed is required. *
*Currently I have one dedicated server in cloud with below configuration. *
*Intel(R) Xeon ** @ 3.30GHz* *12GB RAM* *8MB Casche* *500GB HDD with 7k RPM*
*Please suggest if this is capable to handle above requirements. *
-- Thanks & Regard Uday Site:- www.shareyourknowledge.in Mobile:- +91-9377579349
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
my bad, I see now On Mon, Sep 12, 2016 at 10:14 AM, Stanislav Sinyagin <ssinyagin@gmail.com> wrote:
Last time I checked, freeswitch was distributed under MIT license. Has it changed?
On 12 Sep 2016 03:59, "Ken Rice" <krice@freeswitch.org> wrote:
What does the mit or the gpl have to do with freeswitch?
Sent from my iPhone
On Sep 11, 2016, at 7:36 PM, Stanislav Sinyagin <ssinyagin@gmail.com> wrote:
Actually Ken, the MIT license allows you to do almost anything you want with modified code. There's no obligation to publish the changes.
Even the Gnu GPL doesn't obligate to publish the changes, it only allows anyone to publish them for you ))
On 10 Sep 2016 22:02, "Ken Rice" <krice@freeswitch.org> wrote:
If you have patch freeswitch you should pdat those patches so that the original authors can review them. This is your obligation under the license
Sent from my iPhone
On Sep 10, 2016, at 2:31 PM, Uday kumar <udy786@gmail.com> wrote:
Hi,
I have developed few future and interface and some modification in old version of freeswitch so my modification is not working in 1.6. This is reason to use old. Its not possible for me to again develop all those changes in new version. I tried in new version but didn't worked so I have only option to use 1.4.
Please advise server.
Thanks Uday.
On Sep 10, 2016 10:55 PM, "Michael Jerris" <mike@jerris.com> wrote:
Why would you use an old unsupported version?
On Saturday, September 10, 2016, Uday kumar <udy786@gmail.com> wrote:
Hi All,
I need your help to setup Freeswitch server for 1000 concurrent call on CentOS. Freeswitch version 1.4.26 for below modules:-
1. Conference 2. CallCenter:- In CallCenter Module will use ring group, queue etc. 3. Extension to extension Calls, Extention to Mobile/Landline call using SIP. 4. IVR 5. Recording:- Record all Calls (Conference, CallCenter, Extension, IVR etc) 6. To tracking RTP, use tool Voipmonitor. 7. For security iptables. 8. Database is MySQL.
To make outgoing and incoming calls will configure multiple Carrier provider and DID.
Please suggest server configuration for above setup and also how much Internet speed is required.
Currently I have one dedicated server in cloud with below configuration.
Intel(R) Xeon @ 3.30GHz 12GB RAM 8MB Casche 500GB HDD with 7k RPM
Please suggest if this is capable to handle above requirements.
-- Thanks & Regard Uday Site:- www.shareyourknowledge.in Mobile:- +91-9377579349
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
пн, 12 сент. 2016 г. в 3:37, Stanislav Sinyagin <ssinyagin@gmail.com>:
Actually Ken, the MIT license allows you to do almost anything you want with modified code. There's no obligation to publish the changes.
Even the Gnu GPL doesn't obligate to publish the changes, it only allows anyone to publish them for you ))
Hello Stanislav Please look at term "Made available". This term requires "Any Modification which You create or to which You contribute must be made available in Source Code ... to anyone to whom you made an Executable version available". http://website-archive.mozilla.org/www.mozilla.org/mpl/MPL/1.0/annotated/ https://www.mozilla.org/en-US/MPL/1.1/annotated/ https://www.mozilla.org/en-US/MPL/2.0/FAQ/
Isn’t FreeSWITCH MPL not MIT? From: <freeswitch-users-bounces@lists.freeswitch.org> on behalf of Sergey Safarov <s.safarov@gmail.com> Reply-To: FreeSWITCH Users Help <freeswitch-users@lists.freeswitch.org> Date: Sunday, September 11, 2016 at 9:34 PM To: FreeSWITCH Users Help <freeswitch-users@lists.freeswitch.org> Subject: Re: [Freeswitch-users] Hardware requirement for 1000 Calls пн, 12 сент. 2016 г. в 3:37, Stanislav Sinyagin <ssinyagin@gmail.com<mailto:ssinyagin@gmail.com>>: Actually Ken, the MIT license allows you to do almost anything you want with modified code. There's no obligation to publish the changes. Even the Gnu GPL doesn't obligate to publish the changes, it only allows anyone to publish them for you )) Hello Stanislav Please look at term "Made available". This term requires "Any Modification which You create or to which You contribute must be made available in Source Code ... to anyone to whom you made an Executable version available". http://website-archive.mozilla.org/www.mozilla.org/mpl/MPL/1.0/annotated/ https://www.mozilla.org/en-US/MPL/1.1/annotated/ https://www.mozilla.org/en-US/MPL/2.0/FAQ/
correct From: freeswitch-users-bounces@lists.freeswitch.org [mailto:freeswitch-users-bounces@lists.freeswitch.org] On Behalf Of Darren Sent: Sunday, September 11, 2016 11:39 PM To: FreeSWITCH Users Help <freeswitch-users@lists.freeswitch.org> Subject: Re: [Freeswitch-users] Hardware requirement for 1000 Calls Isn’t FreeSWITCH MPL not MIT? From: <freeswitch-users-bounces@lists.freeswitch.org <mailto:freeswitch-users-bounces@lists.freeswitch.org> > on behalf of Sergey Safarov <s.safarov@gmail.com <mailto:s.safarov@gmail.com> > Reply-To: FreeSWITCH Users Help <freeswitch-users@lists.freeswitch.org <mailto:freeswitch-users@lists.freeswitch.org> > Date: Sunday, September 11, 2016 at 9:34 PM To: FreeSWITCH Users Help <freeswitch-users@lists.freeswitch.org <mailto:freeswitch-users@lists.freeswitch.org> > Subject: Re: [Freeswitch-users] Hardware requirement for 1000 Calls пн, 12 сент. 2016 г. в 3:37, Stanislav Sinyagin <ssinyagin@gmail.com <mailto:ssinyagin@gmail.com> >: Actually Ken, the MIT license allows you to do almost anything you want with modified code. There's no obligation to publish the changes. Even the Gnu GPL doesn't obligate to publish the changes, it only allows anyone to publish them for you )) Hello Stanislav Please look at term "Made available". This term requires "Any Modification which You create or to which You contribute must be made available in Source Code ... to anyone to whom you made an Executable version available". http://website-archive.mozilla.org/www.mozilla.org/mpl/MPL/1.0/annotated/ https://www.mozilla.org/en-US/MPL/1.1/annotated/ https://www.mozilla.org/en-US/MPL/2.0/FAQ/
participants (8)
-
Darren
-
Don Hawkins
-
Gonzalo Gasca Meza
-
Ken Rice
-
Moishe Grunstein
-
Sergey Safarov
-
Stanislav Sinyagin
-
Uday kumar