Hello, I'm trying to use mod_rtmp but everytime I tried on the console I see User not authorized. I was trying with user:1000 and password:1234. In the file rtmp.conf.xml I have all by default: <param name="bind-address" value="0.0.0.0:1935" /> <param name="context" value="public" /> <param name="dialplan" value="XML" /> <param name="auth-calls" value="true" /> <param name="buffer-len" value="50" /> <param name="chunksize" value="512" /> Best regards, Ricardo Saavedra
Ricardo, If your 1000 is default it is probably set up with <variable name="*user_context*"value="*default*"/> if you set the param in rtmp.conf.xml to match the context and then do a reloadxml or restart freeswitch it may authorize for you. <param name="context" value="default" /> Hope that helps! Jack On 10/25/2011 7:16 PM, rsaavedra@ecogizmos.com wrote:
Hello,
I'm trying to use mod_rtmp but everytime I tried on the console I see User not authorized. I was trying with user:1000 and password:1234.
In the file rtmp.conf.xml I have all by default: <param name="bind-address" value="0.0.0.0:1935" /> <param name="context" value="public" /> <param name="dialplan" value="XML" /> <param name="auth-calls" value="true" /> <param name="buffer-len" value="50" /> <param name="chunksize" value="512" />
Best regards,
Ricardo Saavedra
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
Thank you, so in the flex client I will write the user like 1000@1.2.3.4 Best regards, Ricardo
Ricardo, If your 1000 is default it is probably set up with <variable name="*user_context*"value="*default*"/>
if you set the param in rtmp.conf.xml to match the context and then do a reloadxml or restart freeswitch it may authorize for you. <param name="context" value="default" />
Hope that helps! Jack
On 10/25/2011 7:16 PM, rsaavedra@ecogizmos.com wrote:
Hello,
I'm trying to use mod_rtmp but everytime I tried on the console I see User not authorized. I was trying with user:1000 and password:1234.
In the file rtmp.conf.xml I have all by default: <param name="bind-address" value="0.0.0.0:1935" /> <param name="context" value="public" /> <param name="dialplan" value="XML" /> <param name="auth-calls" value="true" /> <param name="buffer-len" value="50" /> <param name="chunksize" value="512" />
Best regards,
Ricardo Saavedra
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
That would be correct if your FreeSwitch server IP address is 1.2.3.4 On 10/26/2011 10:04 AM, rsaavedra@ecogizmos.com wrote:
Thank you,
so in the flex client I will write the user like 1000@1.2.3.4
Best regards,
Ricardo
Ricardo, If your 1000 is default it is probably set up with <variable name="*user_context*"value="*default*"/>
if you set the param in rtmp.conf.xml to match the context and then do a reloadxml or restart freeswitch it may authorize for you. <param name="context" value="default" />
Hope that helps! Jack
On 10/25/2011 7:16 PM, rsaavedra@ecogizmos.com wrote:
Hello,
I'm trying to use mod_rtmp but everytime I tried on the console I see User not authorized. I was trying with user:1000 and password:1234.
In the file rtmp.conf.xml I have all by default: <param name="bind-address" value="0.0.0.0:1935" /> <param name="context" value="public" /> <param name="dialplan" value="XML" /> <param name="auth-calls" value="true" /> <param name="buffer-len" value="50" /> <param name="chunksize" value="512" />
Best regards,
Ricardo Saavedra
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
Thank you, I'm using on the flex client the user 1002@1.2.3.4, the user 1000@1.2.3.4 on a sip hard phone (aastra 480). My problem in this moment is: the user 1002 can hear but the user 1000 can't hear. Best regards, Ricardo Saavedra
That would be correct if your FreeSwitch server IP address is 1.2.3.4
On 10/26/2011 10:04 AM, rsaavedra@ecogizmos.com wrote:
Thank you,
so in the flex client I will write the user like 1000@1.2.3.4
Best regards,
Ricardo
Ricardo, If your 1000 is default it is probably set up with <variable name="*user_context*"value="*default*"/>
if you set the param in rtmp.conf.xml to match the context and then do a reloadxml or restart freeswitch it may authorize for you. <param name="context" value="default" />
Hope that helps! Jack
On 10/25/2011 7:16 PM, rsaavedra@ecogizmos.com wrote:
Hello,
I'm trying to use mod_rtmp but everytime I tried on the console I see User not authorized. I was trying with user:1000 and password:1234.
In the file rtmp.conf.xml I have all by default: <param name="bind-address" value="0.0.0.0:1935" /> <param name="context" value="public" /> <param name="dialplan" value="XML" /> <param name="auth-calls" value="true" /> <param name="buffer-len" value="50" /> <param name="chunksize" value="512" />
Best regards,
Ricardo Saavedra
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
Ricardo, It could be that your hard phone is coming in on port 5080 instead of port 5060 and ending up in your public dialplan instead of your default dialplan. Jack On 11/1/2011 12:43 PM, rsaavedra@ecogizmos.com wrote:
Thank you, I'm using on the flex client the user 1002@1.2.3.4, the user 1000@1.2.3.4 on a sip hard phone (aastra 480).
My problem in this moment is: the user 1002 can hear but the user 1000 can't hear.
Best regards,
Ricardo Saavedra
That would be correct if your FreeSwitch server IP address is 1.2.3.4
On 10/26/2011 10:04 AM, rsaavedra@ecogizmos.com wrote:
Thank you,
so in the flex client I will write the user like 1000@1.2.3.4
Best regards,
Ricardo
Ricardo, If your 1000 is default it is probably set up with <variable name="*user_context*"value="*default*"/>
if you set the param in rtmp.conf.xml to match the context and then do a reloadxml or restart freeswitch it may authorize for you. <param name="context" value="default" />
Hope that helps! Jack
On 10/25/2011 7:16 PM, rsaavedra@ecogizmos.com wrote:
Hello,
I'm trying to use mod_rtmp but everytime I tried on the console I see User not authorized. I was trying with user:1000 and password:1234.
In the file rtmp.conf.xml I have all by default: <param name="bind-address" value="0.0.0.0:1935" /> <param name="context" value="public" /> <param name="dialplan" value="XML" /> <param name="auth-calls" value="true" /> <param name="buffer-len" value="50" /> <param name="chunksize" value="512" />
Best regards,
Ricardo Saavedra
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
Thank you, now everything is working.
Ricardo, It could be that your hard phone is coming in on port 5080 instead of port 5060 and ending up in your public dialplan instead of your default dialplan. Jack
On 11/1/2011 12:43 PM, rsaavedra@ecogizmos.com wrote:
Thank you, I'm using on the flex client the user 1002@1.2.3.4, the user 1000@1.2.3.4 on a sip hard phone (aastra 480).
My problem in this moment is: the user 1002 can hear but the user 1000 can't hear.
Best regards,
Ricardo Saavedra
That would be correct if your FreeSwitch server IP address is 1.2.3.4
On 10/26/2011 10:04 AM, rsaavedra@ecogizmos.com wrote:
Thank you,
so in the flex client I will write the user like 1000@1.2.3.4
Best regards,
Ricardo
Ricardo, If your 1000 is default it is probably set up with <variable name="*user_context*"value="*default*"/>
if you set the param in rtmp.conf.xml to match the context and then do a reloadxml or restart freeswitch it may authorize for you. <param name="context" value="default" />
Hope that helps! Jack
On 10/25/2011 7:16 PM, rsaavedra@ecogizmos.com wrote:
Hello,
I'm trying to use mod_rtmp but everytime I tried on the console I see User not authorized. I was trying with user:1000 and password:1234.
In the file rtmp.conf.xml I have all by default: <param name="bind-address" value="0.0.0.0:1935" /> <param name="context" value="public" /> <param name="dialplan" value="XML" /> <param name="auth-calls" value="true" /> <param name="buffer-len" value="50" /> <param name="chunksize" value="512" />
Best regards,
Ricardo Saavedra
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
participants (2)
-
Jack
-
rsaavedra＠ecogizmos.com