Dear All, In this moment i am using Asterisk for my services VoIP; i am testing FS and i am very interest on change Asterisk for FS, my motivation is improve my qualify mainly ACD statics. But i have problem, G729 codec is only supported in passthrough mode. FreeSwitch does not do any transcoding with G729 yet, hence I can't fully move to FS without G729 support. I am receiving traffic in g729 in Asterisk(does very bad) i need a FS to receive this traffic and convert to ulaw and forward to other SIP provider, how i can do or anyone help me? I hope your comments or idea how i can do, Fernando.
You have a few choices. If you can hold out until g729 licensing is available in FreeSWITCH then that's a viable option. If not then you'll need to go the hardware route. Go to wiki.freeswitch.org and search for "mid_dahdi_codec" and you can learn more about the details. Essentially you can buy a card that does the g729 transcoding - license included - and still use FS. -MC Sent from my iPhone On May 30, 2009, at 8:23 PM, FERNANDO VILLARROEL <fvillarroel@yahoo.com> wrote:
Dear All,
In this moment i am using Asterisk for my services VoIP; i am testing FS and i am very interest on change Asterisk for FS, my motivation is improve my qualify mainly ACD statics.
But i have problem, G729 codec is only supported in passthrough mode. FreeSwitch does not do any transcoding with G729 yet, hence I can't fully move to FS without G729 support.
I am receiving traffic in g729 in Asterisk(does very bad) i need a FS to receive this traffic and convert to ulaw and forward to other SIP provider, how i can do or anyone help me?
I hope your comments or idea how i can do,
Fernando.
_______________________________________________ Freeswitch-users mailing list Freeswitch-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
I've tried that search in the wiki but with no result. Can you provide the exact url? On Sun, May 31, 2009 at 08:39, Michael S Collins <msc@freeswitch.org> wrote:
You have a few choices. If you can hold out until g729 licensing is available in FreeSWITCH then that's a viable option. If not then you'll need to go the hardware route. Go to wiki.freeswitch.org and search for "mid_dahdi_codec" and you can learn more about the details. Essentially you can buy a card that does the g729 transcoding - license included - and still use FS.
-MC
Sent from my iPhone
On May 30, 2009, at 8:23 PM, FERNANDO VILLARROEL <fvillarroel@yahoo.com> wrote:
Dear All,
In this moment i am using Asterisk for my services VoIP; i am testing FS and i am very interest on change Asterisk for FS, my motivation is improve my qualify mainly ACD statics.
But i have problem, G729 codec is only supported in passthrough mode. FreeSwitch does not do any transcoding with G729 yet, hence I can't fully move to FS without G729 support.
I am receiving traffic in g729 in Asterisk(does very bad) i need a FS to receive this traffic and convert to ulaw and forward to other SIP provider, how i can do or anyone help me?
I hope your comments or idea how i can do,
Fernando.
_______________________________________________ Freeswitch-users mailing list Freeswitch-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ Freeswitch-users mailing list Freeswitch-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
On Sun, May 31, 2009 at 2:45 AM, Raffaele P. Guidi <raffaele.p.guidi@gmail.com> wrote:
I've tried that search in the wiki but with no result. Can you provide the exact url?
mod_dahdi_codec is already part of Freeswitch release afair, so all you need to do is compile mod_dahdi_codec and choose g729 in your codecs. -- Moises Silva Software Developer Sangoma Technologies Inc. | 50 McIntosh Drive, Suite 120, Markham ON L3R 9T3 Canada t. 1 905 474 1990 x 128 | e. moy@sangoma.com
Ok, great, is it included in windows binaries, too? And I justed wanted to point out that mod_dahdi_codec is not mentioned in the wiki (and not even in the whole internet, as far as google is concerned... ;) On Sun, May 31, 2009 at 18:44, Moises Silva <moises.silva@gmail.com> wrote:
On Sun, May 31, 2009 at 2:45 AM, Raffaele P. Guidi <raffaele.p.guidi@gmail.com> wrote:
I've tried that search in the wiki but with no result. Can you provide the exact url?
mod_dahdi_codec is already part of Freeswitch release afair, so all you need to do is compile mod_dahdi_codec and choose g729 in your codecs.
-- Moises Silva Software Developer Sangoma Technologies Inc. | 50 McIntosh Drive, Suite 120, Markham ON L3R 9T3 Canada t. 1 905 474 1990 x 128 | e. moy@sangoma.com
_______________________________________________ Freeswitch-users mailing list Freeswitch-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
On Sun, May 31, 2009 at 12:49 PM, Raffaele P. Guidi <raffaele.p.guidi@gmail.com> wrote:
Ok, great, is it included in windows binaries, too? And I justed wanted to point out that mod_dahdi_codec is not mentioned in the wiki (and not even in the whole internet, as far as google is concerned... ;) Which google are you using? I got several hits in svn and freeswitch release notes for mod_dahdi_codec
Regarding Windows you are out of luck, that module uses Digium hardware and there is only drivers for Linux, therefore the module just works in Linux. -- Moises Silva Software Developer Sangoma Technologies Inc. | 50 McIntosh Drive, Suite 120, Markham ON L3R 9T3 Canada t. 1 905 474 1990 x 128 | e. moy@sangoma.com
If you live in patent-free country, you can try this: http://github.com/Deepwalker/fs_itu_g729/tree/master Regards, Mindaugas Kezys http://www.kolmisoft.com VoIP Billing and Routing Solutions -----Original Message----- From: freeswitch-users-bounces@lists.freeswitch.org [mailto:freeswitch-users-bounces@lists.freeswitch.org] On Behalf Of FERNANDO VILLARROEL Sent: 2009 m. gegužės 31 d. 06:24 To: freeswitch-users@lists.freeswitch.org Subject: [Freeswitch-users] g729 support Dear All, In this moment i am using Asterisk for my services VoIP; i am testing FS and i am very interest on change Asterisk for FS, my motivation is improve my qualify mainly ACD statics. But i have problem, G729 codec is only supported in passthrough mode. FreeSwitch does not do any transcoding with G729 yet, hence I can't fully move to FS without G729 support. I am receiving traffic in g729 in Asterisk(does very bad) i need a FS to receive this traffic and convert to ulaw and forward to other SIP provider, how i can do or anyone help me? I hope your comments or idea how i can do, Fernando. _______________________________________________ Freeswitch-users mailing list Freeswitch-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
Do you think fs_itu_g729 would work on windows, too? Has this ever been tried? 2009/5/31 Mindaugas Kezys <mkezys@gmail.com>
If you live in patent-free country, you can try this: http://github.com/Deepwalker/fs_itu_g729/tree/master
Regards, Mindaugas Kezys http://www.kolmisoft.com VoIP Billing and Routing Solutions
-----Original Message----- From: freeswitch-users-bounces@lists.freeswitch.org [mailto:freeswitch-users-bounces@lists.freeswitch.org] On Behalf Of FERNANDO VILLARROEL Sent: 2009 m. gegužės 31 d. 06:24 To: freeswitch-users@lists.freeswitch.org Subject: [Freeswitch-users] g729 support
Dear All,
In this moment i am using Asterisk for my services VoIP; i am testing FS and i am very interest on change Asterisk for FS, my motivation is improve my qualify mainly ACD statics.
But i have problem, G729 codec is only supported in passthrough mode. FreeSwitch does not do any transcoding with G729 yet, hence I can't fully move to FS without G729 support.
I am receiving traffic in g729 in Asterisk(does very bad) i need a FS to receive this traffic and convert to ulaw and forward to other SIP provider, how i can do or anyone help me?
I hope your comments or idea how i can do,
Fernando.
_______________________________________________ Freeswitch-users mailing list Freeswitch-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ Freeswitch-users mailing list Freeswitch-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
Mindaugas Kezys wrote:
If you live in patent-free country, you can try this: http://github.com/Deepwalker/fs_itu_g729/tree/master
You live in Antarctica? :-\ Steve
If you live in patent-free country, you can try this: http://github.com/Deepwalker/fs_itu_g729/tree/master
I've a friend who says he knows of someone who's tried it in non- patent-free countries, and it works fine there too. Alternatively, an Asterisk box makes a perfectly good G.729 to G.711 transcoder. --Dave
Regards, Mindaugas Kezys http://www.kolmisoft.com VoIP Billing and Routing Solutions
-----Original Message----- From: freeswitch-users-bounces@lists.freeswitch.org [mailto:freeswitch-users-bounces@lists.freeswitch.org] On Behalf Of FERNANDO VILLARROEL Sent: 2009 m. gegužės 31 d. 06:24 To: freeswitch-users@lists.freeswitch.org Subject: [Freeswitch-users] g729 support
Dear All,
In this moment i am using Asterisk for my services VoIP; i am testing FS and i am very interest on change Asterisk for FS, my motivation is improve my qualify mainly ACD statics.
But i have problem, G729 codec is only supported in passthrough mode. FreeSwitch does not do any transcoding with G729 yet, hence I can't fully move to FS without G729 support.
I am receiving traffic in g729 in Asterisk(does very bad) i need a FS to receive this traffic and convert to ulaw and forward to other SIP provider, how i can do or anyone help me?
I hope your comments or idea how i can do,
Fernando.
_______________________________________________ Freeswitch-users mailing list Freeswitch-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ Freeswitch-users mailing list Freeswitch-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
What's the difficulty in taking Digium's codec_g729a.so and writing a wrapper around it? -----Original Message----- From: freeswitch-users-bounces@lists.freeswitch.org [mailto:freeswitch-users-bounces@lists.freeswitch.org] On Behalf Of Mindaugas Kezys Sent: Sunday, May 31, 2009 1:06 AM To: freeswitch-users@lists.freeswitch.org Subject: Re: [Freeswitch-users] g729 support If you live in patent-free country, you can try this: http://github.com/Deepwalker/fs_itu_g729/tree/master Regards, Mindaugas Kezys http://www.kolmisoft.com VoIP Billing and Routing Solutions -----Original Message----- From: freeswitch-users-bounces@lists.freeswitch.org [mailto:freeswitch-users-bounces@lists.freeswitch.org] On Behalf Of FERNANDO VILLARROEL Sent: 2009 m. gegužės 31 d. 06:24 To: freeswitch-users@lists.freeswitch.org Subject: [Freeswitch-users] g729 support Dear All, In this moment i am using Asterisk for my services VoIP; i am testing FS and i am very interest on change Asterisk for FS, my motivation is improve my qualify mainly ACD statics. But i have problem, G729 codec is only supported in passthrough mode. FreeSwitch does not do any transcoding with G729 yet, hence I can't fully move to FS without G729 support. I am receiving traffic in g729 in Asterisk(does very bad) i need a FS to receive this traffic and convert to ulaw and forward to other SIP provider, how i can do or anyone help me? I hope your comments or idea how i can do, Fernando. _______________________________________________ Freeswitch-users mailing list Freeswitch-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org _______________________________________________ Freeswitch-users mailing list Freeswitch-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
I'm going to say this one last time. DO NOT POST links to g729 on the list. You'll be happy to know that there aren't any places that the codec isn't patented even these so called patent free zones are iffy and putting the code on the list like this puts the project in a serious position. Please do not post them again. Thanks, Brian On May 31, 2009, at 2:05 AM, Mindaugas Kezys wrote:
If you live in patent-free country, you can try this: http://github.com/Deepwalker/fs_itu_g729/tree/master
Regards, Mindaugas Kezys http://www.kolmisoft.com VoIP Billing and Routing Solutions
Brian West brian@freeswitch.org -- Meet us at ClueCon! http://www.cluecon.com
My apologies. Regards, Mindaugas Kezys http://www.kolmisoft.com VoIP Billing and Routing Solutions -----Original Message----- From: freeswitch-users-bounces@lists.freeswitch.org [mailto:freeswitch-users-bounces@lists.freeswitch.org] On Behalf Of Brian West Sent: 2009 m. gegužės 31 d. 18:40 To: freeswitch-users@lists.freeswitch.org Subject: Re: [Freeswitch-users] g729 support I'm going to say this one last time. DO NOT POST links to g729 on the list. You'll be happy to know that there aren't any places that the codec isn't patented even these so called patent free zones are iffy and putting the code on the list like this puts the project in a serious position. Please do not post them again. Thanks, Brian On May 31, 2009, at 2:05 AM, Mindaugas Kezys wrote:
If you live in patent-free country, you can try this: http://github.com/Deepwalker/fs_itu_g729/tree/master
Regards, Mindaugas Kezys http://www.kolmisoft.com VoIP Billing and Routing Solutions
Brian West brian@freeswitch.org -- Meet us at ClueCon! http://www.cluecon.com _______________________________________________ Freeswitch-users mailing list Freeswitch-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
Hey Brian, I assume this is not appropriate in the wiki also. Let me know and I can remove. http://wiki.freeswitch.org/wiki/Mod_g729 Regards, On Mon, Jun 1, 2009 at 1:40 AM, Brian West <brian@freeswitch.org> wrote:
I'm going to say this one last time. DO NOT POST links to g729 on the list. You'll be happy to know that there aren't any places that the codec isn't patented even these so called patent free zones are iffy and putting the code on the list like this puts the project in a serious position. Please do not post them again.
Thanks, Brian
On May 31, 2009, at 2:05 AM, Mindaugas Kezys wrote:
If you live in patent-free country, you can try this: http://github.com/Deepwalker/fs_itu_g729/tree/master
Regards, Mindaugas Kezys http://www.kolmisoft.com VoIP Billing and Routing Solutions
Brian West brian@freeswitch.org
-- Meet us at ClueCon! http://www.cluecon.com
_______________________________________________ Freeswitch-users mailing list Freeswitch-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
The problem is the project is trying to license G729 so we can do 2 things 1) have a legit supported G729 option and 2) keep the patent lawyers at bay... This type of thing makes it look like the project supports violating their IP rights... This is no different from someone stealing your GPLd code and putting it in their software and not abiding by the license...
From: Jim Burke <jim@evolutiontel.net> Reply-To: <freeswitch-users@lists.freeswitch.org> Date: Mon, 1 Jun 2009 14:06:10 +1000 To: <freeswitch-users@lists.freeswitch.org> Subject: Re: [Freeswitch-users] g729 support
Hey Brian,
I assume this is not appropriate in the wiki also. Let me know and I can remove.
http://wiki.freeswitch.org/wiki/Mod_g729
Regards,
On Mon, Jun 1, 2009 at 1:40 AM, Brian West <brian@freeswitch.org> wrote:
I'm going to say this one last time. DO NOT POST links to g729 on the list. You'll be happy to know that there aren't any places that the codec isn't patented even these so called patent free zones are iffy and putting the code on the list like this puts the project in a serious position. Please do not post them again.
Thanks, Brian
On May 31, 2009, at 2:05 AM, Mindaugas Kezys wrote:
If you live in patent-free country, you can try this: http://github.com/Deepwalker/fs_itu_g729/tree/master
Regards, Mindaugas Kezys http://www.kolmisoft.com VoIP Billing and Routing Solutions
Brian West brian@freeswitch.org
-- Meet us at ClueCon! http://www.cluecon.com
_______________________________________________ Freeswitch-users mailing list Freeswitch-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ Freeswitch-users mailing list Freeswitch-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
Jim, Thats a million times WORSE than posting it on the mailing list. We are working on a legal G729. So please Help us prepare for the coming storm! ;) I have removed the info and protected the wiki page. /b On May 31, 2009, at 11:06 PM, Jim Burke wrote:
Hey Brian,
I assume this is not appropriate in the wiki also. Let me know and I can remove.
http://wiki.freeswitch.org/wiki/Mod_g729
Regards,
Brian West brian@freeswitch.org -- Meet us at ClueCon! http://www.cluecon.com
Hi Brian, I hope you realise that I did not put it up, just the reporting that it was there. Regards On Mon, Jun 1, 2009 at 2:19 PM, Brian West <brian@freeswitch.org> wrote:
Jim, Thats a million times WORSE than posting it on the mailing list. We are working on a legal G729. So please Help us prepare for the coming storm! ;) I have removed the info and protected the wiki page. /b
On May 31, 2009, at 11:06 PM, Jim Burke wrote:
Hey Brian,
I assume this is not appropriate in the wiki also. Let me know and I can remove.
http://wiki.freeswitch.org/wiki/Mod_g729
Regards,
Brian West brian@freeswitch.org -- Meet us at ClueCon! http://www.cluecon.com
_______________________________________________ Freeswitch-users mailing list Freeswitch-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
Yes... just voicing my concern! ;) /b PS: Thanks for pointing it out! On Jun 1, 2009, at 12:18 AM, Jim Burke wrote:
Hi Brian,
I hope you realise that I did not put it up, just the reporting that it was there.
Regards
Brian West brian@freeswitch.org -- Meet us at ClueCon! http://www.cluecon.com
participants (11)
-
Brian West
-
David Knell
-
FERNANDO VILLARROEL
-
Jim Burke
-
Ken Rice
-
Michael Giagnocavo
-
Michael S Collins
-
Mindaugas Kezys
-
Moises Silva
-
Raffaele P. Guidi
-
Steve Underwood