How to receive incoming calls from Huawei dongle and mod_gsmopen?
Hi, I'm a newbie trying to setup FreeSWITCH with FusionPBX and mod_gsmopen. I'm using the 32bit version in Windows 7, compiled from current source (version 1.7) in Visual Studio 2015 Community. My Huawei dongle is E1756, unlocked and with voice calls enabled. Currently I am able to call my IVR menu directly by dialing from my softphone and I am also able to originate outbound calls after adding a rule using FusionPbx Dialplan Manager. However if I try to call the dongle it keeps ringing, not being answered and no log is displayed in console. My gsmopen.conf.xml file has the following lines: <param name="context" value="public"/> <param name="destination" value="incoming_gsm_call"/> And I've set a new dialplan in fusionpbx rule with: condition > context > public condition > destination_number > incoming_gsm_call action > transfer > 500 XML default (500 being the main IVR menu extension) Am I missing something to get this working or maybe there is some setting wrong with my dongle? Thanks!
Have you compiled and loaded the module? Do you have any trace of its presence in freeswitch console? Also, if you are not an expert I would definitely counseil you not to try uncharted things like gsmopen on won with fusionpbx. It's just too complex. Do it after you master both fusionpbx and FreeSWITCH. My two cents :) -giovanni sent from mobile cell: +39 347 266 56 18 Giovanni Maruzzelli OpenTelecom.IT Il 16/Mag/2016 21:10, "Gabriel MdS" <gabriel@cefet.net> ha scritto:
Hi,
I'm a newbie trying to setup FreeSWITCH with FusionPBX and mod_gsmopen. I'm using the 32bit version in Windows 7, compiled from current source (version 1.7) in Visual Studio 2015 Community.
My Huawei dongle is E1756, unlocked and with voice calls enabled.
Currently I am able to call my IVR menu directly by dialing from my softphone and I am also able to originate outbound calls after adding a rule using FusionPbx Dialplan Manager.
However if I try to call the dongle it keeps ringing, not being answered and no log is displayed in console. My gsmopen.conf.xml file has the following lines:
<param name="context" value="public"/> <param name="destination" value="incoming_gsm_call"/>
And I've set a new dialplan in fusionpbx rule with:
condition > context > public condition > destination_number > incoming_gsm_call action > transfer > 500 XML default (500 being the main IVR menu extension)
Am I missing something to get this working or maybe there is some setting wrong with my dongle?
Thanks!
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
Yes, you have to compile it first, because it is not compiled with freeswitch build, then you need to load it. It is in confluence. Giovanni, can you tell me how can I find out which COM ports dongle uses? 2016-05-16 21:48 GMT+02:00 Giovanni Maruzzelli <gmaruzz@gmail.com>:
Have you compiled and loaded the module?
Do you have any trace of its presence in freeswitch console?
Also, if you are not an expert I would definitely counseil you not to try uncharted things like gsmopen on won with fusionpbx. It's just too complex. Do it after you master both fusionpbx and FreeSWITCH.
My two cents :) -giovanni
sent from mobile cell: +39 347 266 56 18 Giovanni Maruzzelli OpenTelecom.IT Il 16/Mag/2016 21:10, "Gabriel MdS" <gabriel@cefet.net> ha scritto:
Hi,
I'm a newbie trying to setup FreeSWITCH with FusionPBX and mod_gsmopen. I'm using the 32bit version in Windows 7, compiled from current source (version 1.7) in Visual Studio 2015 Community.
My Huawei dongle is E1756, unlocked and with voice calls enabled.
Currently I am able to call my IVR menu directly by dialing from my softphone and I am also able to originate outbound calls after adding a rule using FusionPbx Dialplan Manager.
However if I try to call the dongle it keeps ringing, not being answered and no log is displayed in console. My gsmopen.conf.xml file has the following lines:
<param name="context" value="public"/> <param name="destination" value="incoming_gsm_call"/>
And I've set a new dialplan in fusionpbx rule with:
condition > context > public condition > destination_number > incoming_gsm_call action > transfer > 500 XML default (500 being the main IVR menu extension)
Am I missing something to get this working or maybe there is some setting wrong with my dongle?
Thanks!
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- Gregor Nanger *CTO* t./f.: 00386 (0) 7 6000 308/309 • m:. 00386 (0)41 756485 • Infomedia d.o.o. • Jerebova 3, Novo mesto, Slovenia • www.infomedia.si
On Mon, May 16, 2016 at 10:07 PM, Gregor Nanger <gregor@infomedia.si> wrote:
Yes, you have to compile it first, because it is not compiled with freeswitch build, then you need to load it. It is in confluence.
Giovanni, can you tell me how can I find out which COM ports dongle uses?
As you can see in config file ( freeswitch.git\src\mod\endpoints\mod_gsmopen\configs\gsmopen.conf.xml ), you *MUST* set which COM port to use, eg: =========== <per_interface_settings> <interface id="1" name="gsm01"> <param name="controldevice_name" value="/dev/ttyUSB3"/> <param name="controldevice_audio_name" value="/dev/ttyUSB2"/> <!-- in windowz would be, eg: --> <!-- <param name="controldevice_name" value="COM4"/> --> <!-- 3G PC UI Interface is controldevice_name --> <!-- <param name="controldevice_audio_name" value="COM2"/> --> <!-- 3G Application Interface is controldevice_audio_name --> </interface> <!-- following interfaces are commented out! --> </per_interface_settings> ===========
2016-05-16 21:48 GMT+02:00 Giovanni Maruzzelli <gmaruzz@gmail.com>:
Have you compiled and loaded the module?
Do you have any trace of its presence in freeswitch console?
Also, if you are not an expert I would definitely counseil you not to try uncharted things like gsmopen on won with fusionpbx. It's just too complex. Do it after you master both fusionpbx and FreeSWITCH.
My two cents :) -giovanni
sent from mobile cell: +39 347 266 56 18 Giovanni Maruzzelli OpenTelecom.IT Il 16/Mag/2016 21:10, "Gabriel MdS" <gabriel@cefet.net> ha scritto:
Hi,
I'm a newbie trying to setup FreeSWITCH with FusionPBX and mod_gsmopen. I'm using the 32bit version in Windows 7, compiled from current source (version 1.7) in Visual Studio 2015 Community.
My Huawei dongle is E1756, unlocked and with voice calls enabled.
Currently I am able to call my IVR menu directly by dialing from my softphone and I am also able to originate outbound calls after adding a rule using FusionPbx Dialplan Manager.
However if I try to call the dongle it keeps ringing, not being answered and no log is displayed in console. My gsmopen.conf.xml file has the following lines:
<param name="context" value="public"/> <param name="destination" value="incoming_gsm_call"/>
And I've set a new dialplan in fusionpbx rule with:
condition > context > public condition > destination_number > incoming_gsm_call action > transfer > 500 XML default (500 being the main IVR menu extension)
Am I missing something to get this working or maybe there is some setting wrong with my dongle?
Thanks!
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- Gregor Nanger
*CTO* t./f.: 00386 (0) 7 6000 308/309 • m:. 00386 (0)41 756485 • Infomedia d.o.o. • Jerebova 3, Novo mesto, Slovenia • www.infomedia.si
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- Sincerely, Giovanni Maruzzelli Cell : +39-347-2665618
Yes, this is clear to me, it is just that I do now know where to find which COM ports dongle use :-(( Can I see it in device manager? 2016-05-16 22:29 GMT+02:00 Giovanni Maruzzelli <gmaruzz@gmail.com>:
On Mon, May 16, 2016 at 10:07 PM, Gregor Nanger <gregor@infomedia.si> wrote:
Yes, you have to compile it first, because it is not compiled with freeswitch build, then you need to load it. It is in confluence.
Giovanni, can you tell me how can I find out which COM ports dongle uses?
As you can see in config file ( freeswitch.git\src\mod\endpoints\mod_gsmopen\configs\gsmopen.conf.xml ), you *MUST* set which COM port to use, eg:
=========== <per_interface_settings> <interface id="1" name="gsm01"> <param name="controldevice_name" value="/dev/ttyUSB3"/> <param name="controldevice_audio_name" value="/dev/ttyUSB2"/> <!-- in windowz would be, eg: --> <!-- <param name="controldevice_name" value="COM4"/> --> <!-- 3G PC UI Interface is controldevice_name --> <!-- <param name="controldevice_audio_name" value="COM2"/> --> <!-- 3G Application Interface is controldevice_audio_name --> </interface> <!-- following interfaces are commented out! --> </per_interface_settings>
===========
2016-05-16 21:48 GMT+02:00 Giovanni Maruzzelli <gmaruzz@gmail.com>:
Have you compiled and loaded the module?
Do you have any trace of its presence in freeswitch console?
Also, if you are not an expert I would definitely counseil you not to try uncharted things like gsmopen on won with fusionpbx. It's just too complex. Do it after you master both fusionpbx and FreeSWITCH.
My two cents :) -giovanni
sent from mobile cell: +39 347 266 56 18 Giovanni Maruzzelli OpenTelecom.IT Il 16/Mag/2016 21:10, "Gabriel MdS" <gabriel@cefet.net> ha scritto:
Hi,
I'm a newbie trying to setup FreeSWITCH with FusionPBX and mod_gsmopen. I'm using the 32bit version in Windows 7, compiled from current source (version 1.7) in Visual Studio 2015 Community.
My Huawei dongle is E1756, unlocked and with voice calls enabled.
Currently I am able to call my IVR menu directly by dialing from my softphone and I am also able to originate outbound calls after adding a rule using FusionPbx Dialplan Manager.
However if I try to call the dongle it keeps ringing, not being answered and no log is displayed in console. My gsmopen.conf.xml file has the following lines:
<param name="context" value="public"/> <param name="destination" value="incoming_gsm_call"/>
And I've set a new dialplan in fusionpbx rule with:
condition > context > public condition > destination_number > incoming_gsm_call action > transfer > 500 XML default (500 being the main IVR menu extension)
Am I missing something to get this working or maybe there is some setting wrong with my dongle?
Thanks!
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE: http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- Gregor Nanger
*CTO* t./f.: 00386 (0) 7 6000 308/309 • m:. 00386 (0)41 756485 • Infomedia d.o.o. • Jerebova 3, Novo mesto, Slovenia • www.infomedia.si
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- Sincerely,
Giovanni Maruzzelli Cell : +39-347-2665618
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- Gregor Nanger *CTO* t./f.: 00386 (0) 7 6000 308/309 • m:. 00386 (0)41 756485 • Infomedia d.o.o. • Jerebova 3, Novo mesto, Slovenia • www.infomedia.si
On Mon, May 16, 2016 at 10:39 PM, Gregor Nanger <gregor@infomedia.si> wrote:
Yes, this is clear to me, it is just that I do now know where to find which COM ports dongle use :-(( Can I see it in device manager?
Yes, something like, can't remember the exact name on windows. That tree that shows the hardware connected and their properties
2016-05-16 22:29 GMT+02:00 Giovanni Maruzzelli <gmaruzz@gmail.com>:
On Mon, May 16, 2016 at 10:07 PM, Gregor Nanger <gregor@infomedia.si> wrote:
Yes, you have to compile it first, because it is not compiled with freeswitch build, then you need to load it. It is in confluence.
Giovanni, can you tell me how can I find out which COM ports dongle uses?
As you can see in config file ( freeswitch.git\src\mod\endpoints\mod_gsmopen\configs\gsmopen.conf.xml ), you *MUST* set which COM port to use, eg:
=========== <per_interface_settings> <interface id="1" name="gsm01"> <param name="controldevice_name" value="/dev/ttyUSB3"/> <param name="controldevice_audio_name" value="/dev/ttyUSB2"/> <!-- in windowz would be, eg: --> <!-- <param name="controldevice_name" value="COM4"/> --> <!-- 3G PC UI Interface is controldevice_name --> <!-- <param name="controldevice_audio_name" value="COM2"/> --> <!-- 3G Application Interface is controldevice_audio_name --> </interface> <!-- following interfaces are commented out! --> </per_interface_settings>
===========
2016-05-16 21:48 GMT+02:00 Giovanni Maruzzelli <gmaruzz@gmail.com>:
Have you compiled and loaded the module?
Do you have any trace of its presence in freeswitch console?
Also, if you are not an expert I would definitely counseil you not to try uncharted things like gsmopen on won with fusionpbx. It's just too complex. Do it after you master both fusionpbx and FreeSWITCH.
My two cents :) -giovanni
sent from mobile cell: +39 347 266 56 18 Giovanni Maruzzelli OpenTelecom.IT Il 16/Mag/2016 21:10, "Gabriel MdS" <gabriel@cefet.net> ha scritto:
Hi,
I'm a newbie trying to setup FreeSWITCH with FusionPBX and mod_gsmopen. I'm using the 32bit version in Windows 7, compiled from current source (version 1.7) in Visual Studio 2015 Community.
My Huawei dongle is E1756, unlocked and with voice calls enabled.
Currently I am able to call my IVR menu directly by dialing from my softphone and I am also able to originate outbound calls after adding a rule using FusionPbx Dialplan Manager.
However if I try to call the dongle it keeps ringing, not being answered and no log is displayed in console. My gsmopen.conf.xml file has the following lines:
<param name="context" value="public"/> <param name="destination" value="incoming_gsm_call"/>
And I've set a new dialplan in fusionpbx rule with:
condition > context > public condition > destination_number > incoming_gsm_call action > transfer > 500 XML default (500 being the main IVR menu extension)
Am I missing something to get this working or maybe there is some setting wrong with my dongle?
Thanks!
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE: http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE: http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- Gregor Nanger
*CTO* t./f.: 00386 (0) 7 6000 308/309 • m:. 00386 (0)41 756485 • Infomedia d.o.o. • Jerebova 3, Novo mesto, Slovenia • www.infomedia.si
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- Sincerely,
Giovanni Maruzzelli Cell : +39-347-2665618
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- Gregor Nanger
*CTO* t./f.: 00386 (0) 7 6000 308/309 • m:. 00386 (0)41 756485 • Infomedia d.o.o. • Jerebova 3, Novo mesto, Slovenia • www.infomedia.si
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- Sincerely, Giovanni Maruzzelli Cell : +39-347-2665618
Yes, it is in COM ports tree :-))) I didn't saw it at first. Also dc-unlocker shows it. Thank you. 2016-05-16 22:58 GMT+02:00 Giovanni Maruzzelli <gmaruzz@gmail.com>:
On Mon, May 16, 2016 at 10:39 PM, Gregor Nanger <gregor@infomedia.si> wrote:
Yes, this is clear to me, it is just that I do now know where to find which COM ports dongle use :-(( Can I see it in device manager?
Yes, something like, can't remember the exact name on windows. That tree that shows the hardware connected and their properties
2016-05-16 22:29 GMT+02:00 Giovanni Maruzzelli <gmaruzz@gmail.com>:
On Mon, May 16, 2016 at 10:07 PM, Gregor Nanger <gregor@infomedia.si> wrote:
Yes, you have to compile it first, because it is not compiled with freeswitch build, then you need to load it. It is in confluence.
Giovanni, can you tell me how can I find out which COM ports dongle uses?
As you can see in config file ( freeswitch.git\src\mod\endpoints\mod_gsmopen\configs\gsmopen.conf.xml ), you *MUST* set which COM port to use, eg:
=========== <per_interface_settings> <interface id="1" name="gsm01"> <param name="controldevice_name" value="/dev/ttyUSB3"/> <param name="controldevice_audio_name" value="/dev/ttyUSB2"/> <!-- in windowz would be, eg: --> <!-- <param name="controldevice_name" value="COM4"/> --> <!-- 3G PC UI Interface is controldevice_name --> <!-- <param name="controldevice_audio_name" value="COM2"/> --> <!-- 3G Application Interface is controldevice_audio_name --> </interface> <!-- following interfaces are commented out! --> </per_interface_settings>
===========
2016-05-16 21:48 GMT+02:00 Giovanni Maruzzelli <gmaruzz@gmail.com>:
Have you compiled and loaded the module?
Do you have any trace of its presence in freeswitch console?
Also, if you are not an expert I would definitely counseil you not to try uncharted things like gsmopen on won with fusionpbx. It's just too complex. Do it after you master both fusionpbx and FreeSWITCH.
My two cents :) -giovanni
sent from mobile cell: +39 347 266 56 18 Giovanni Maruzzelli OpenTelecom.IT Il 16/Mag/2016 21:10, "Gabriel MdS" <gabriel@cefet.net> ha scritto:
Hi,
I'm a newbie trying to setup FreeSWITCH with FusionPBX and mod_gsmopen. I'm using the 32bit version in Windows 7, compiled from current source (version 1.7) in Visual Studio 2015 Community.
My Huawei dongle is E1756, unlocked and with voice calls enabled.
Currently I am able to call my IVR menu directly by dialing from my softphone and I am also able to originate outbound calls after adding a rule using FusionPbx Dialplan Manager.
However if I try to call the dongle it keeps ringing, not being answered and no log is displayed in console. My gsmopen.conf.xml file has the following lines:
<param name="context" value="public"/> <param name="destination" value="incoming_gsm_call"/>
And I've set a new dialplan in fusionpbx rule with:
condition > context > public condition > destination_number > incoming_gsm_call action > transfer > 500 XML default (500 being the main IVR menu extension)
Am I missing something to get this working or maybe there is some setting wrong with my dongle?
Thanks!
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE: http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE: http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- Gregor Nanger
*CTO* t./f.: 00386 (0) 7 6000 308/309 • m:. 00386 (0)41 756485 • Infomedia d.o.o. • Jerebova 3, Novo mesto, Slovenia • www.infomedia.si
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE: http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- Sincerely,
Giovanni Maruzzelli Cell : +39-347-2665618
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- Gregor Nanger
*CTO* t./f.: 00386 (0) 7 6000 308/309 • m:. 00386 (0)41 756485 • Infomedia d.o.o. • Jerebova 3, Novo mesto, Slovenia • www.infomedia.si
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- Sincerely,
Giovanni Maruzzelli Cell : +39-347-2665618
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- Gregor Nanger *CTO* t./f.: 00386 (0) 7 6000 308/309 • m:. 00386 (0)41 756485 • Infomedia d.o.o. • Jerebova 3, Novo mesto, Slovenia • www.infomedia.si
Hi Giovanni, Thanks for your response. As I reported in the original message, the module mod_gsmopen is installed and running (auto-loaded). I was able to call others from my softphone using my modem and mod_gsmopen without any problems. I just can't get FreeSWITCH to automatically answer the call and forward it to an IVR menu. It seems like it is not receiving the RING signal or I am missing some other setting... My application is really simple. I have it running on asterix+chan_dongle on a virtual machine, but just recently found FS which runs on windows, which is better for me. If you have any further advice I'd appreciate it! Thanks! -- Gabriel MdS 2016-05-16 16:48 GMT-03:00 Giovanni Maruzzelli <gmaruzz@gmail.com>:
Have you compiled and loaded the module?
Do you have any trace of its presence in freeswitch console?
Also, if you are not an expert I would definitely counseil you not to try uncharted things like gsmopen on won with fusionpbx. It's just too complex. Do it after you master both fusionpbx and FreeSWITCH.
My two cents :) -giovanni
sent from mobile cell: +39 347 266 56 18 Giovanni Maruzzelli OpenTelecom.IT Il 16/Mag/2016 21:10, "Gabriel MdS" <gabriel@cefet.net> ha scritto:
Hi,
I'm a newbie trying to setup FreeSWITCH with FusionPBX and mod_gsmopen. I'm using the 32bit version in Windows 7, compiled from current source (version 1.7) in Visual Studio 2015 Community.
My Huawei dongle is E1756, unlocked and with voice calls enabled.
Currently I am able to call my IVR menu directly by dialing from my softphone and I am also able to originate outbound calls after adding a rule using FusionPbx Dialplan Manager.
However if I try to call the dongle it keeps ringing, not being answered and no log is displayed in console. My gsmopen.conf.xml file has the following lines:
<param name="context" value="public"/> <param name="destination" value="incoming_gsm_call"/>
And I've set a new dialplan in fusionpbx rule with:
condition > context > public condition > destination_number > incoming_gsm_call action > transfer > 500 XML default (500 being the main IVR menu extension)
Am I missing something to get this working or maybe there is some setting wrong with my dongle?
Thanks!
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
participants (3)
-
Gabriel MdS
-
Giovanni Maruzzelli
-
Gregor Nanger