For the said scenario you would probably need policy-based routing on the OS/Netowrk level... If one of the interfaces is a default interface then all trafic wants to leave from that interface. You could try route add -net/-host <ipaddress>/<netmask> dev eth(second ethernet) to add static routes for the providers on the same interface they arrive. On Fri, Mar 14, 2014 at 11:15 PM, Javier Aristizábal < javieraristizabal@gmail.com> wrote:

Hi guys,

I have a server on AWS. And I need two IP address on my FS box, because my stupid carriers can't send the DIDs to the 5080 port anyway, on AWS I only can configure private addresses on my ethernet interfaces, so I have eth0: 10.0.0.97 and eth1: 10.0.0.164. And have two Public IPs associated with each of this Private IPs.

On rtp-ip and sip-ip, I used the private ip, and for ext-rtp-ip and ext-sip-ip I use the public IP. On both external profile and another external profile.

I have a nice carrier that can send DIDs to the port 5080. So I registered an extension, call to the DID:5080 and I get the call on the external profile and I get audio on both sides.

But when I sent the DID:5060 to another external, I can't get audio. This is a test call :http://pastebin.freeswitch.org/22132

I appreciate any clue.

Thanks

Javier

_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com

FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com

Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com

FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org

-- Kerem Erciyes - Sistem Danismani http://keremerciyes.com