Hello, There are two modes of media stream to be proxied or bypassed. 1. Default - "hard proxy" supplying trans coding, DTMF manipulations, etc. 2. Proxy - "light proxy" supplying only symmetrical RTP for mostly NAT traversal purposes. No media stream parsing is supported 3. Media bypass - RTP streams are bypassing FreeSWITCH at all. There are also two channel parameters affecting above modes: bypass_media and proxy_media. - Are these parameters independent? Meaning the combination: bypass_media=true AND proxy_media=true is possible. What effect will be? - Does it means that if I want to turn on "light proxy" I would always need to set bypass_media=false AND proxy_media=true? - How to set "hard proxy" (full media proxy) per channel before to bridge legs? Waiting for your replay ASAP. Thank you in advance. Best Regards. Max Kovalenko Team Leader VoIP & UC Team Managed Services Dept. CyberVision Inc. ------------------------------------------------- tel. +1 (201) 585-9809 ext. 215 Email: mkovalenko@cybervisiontech.com Skype: mkovalenko_cv, panzer_meister WWW: www.cybervisiontech.com
Default, proxy and bybass media are exclusive of each other, you can not combine them on a single call... Proxy media is just that proxy the media Bypass media is just that, bypass freeswitch and send the media direct between the end point... Setting this options is fairly well documented on the wiki... On 11/2/12 9:13 AM, "Max Kovalenko" <mkovalenko@cybervisiontech.com> wrote:
Hello,
There are two modes of media stream to be proxied or bypassed.
1. Default - "hard proxy" supplying trans coding, DTMF manipulations, etc. 2. Proxy - "light proxy" supplying only symmetrical RTP for mostly NAT traversal purposes. No media stream parsing is supported 3. Media bypass - RTP streams are bypassing FreeSWITCH at all.
There are also two channel parameters affecting above modes: bypass_media and proxy_media.
- Are these parameters independent? Meaning the combination: bypass_media=true AND proxy_media=true is possible. What effect will be?
- Does it means that if I want to turn on "light proxy" I would always need to set bypass_media=false AND proxy_media=true?
- How to set "hard proxy" (full media proxy) per channel before to bridge legs?
Waiting for your replay ASAP. Thank you in advance.
Best Regards.
Max Kovalenko Team Leader VoIP & UC Team Managed Services Dept. CyberVision Inc. ------------------------------------------------- tel. +1 (201) 585-9809 ext. 215 Email: mkovalenko@cybervisiontech.com Skype: mkovalenko_cv, panzer_meister WWW: www.cybervisiontech.com
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- Ken http://www.FreeSWITCH.org http://www.ClueCon.com http://www.OSTAG.org irc.freenode.net #freeswitch
There should be no reason to ever use proxy mode (2). default mode that you call "hard proxy" requires no settings to set it, its the default. On Nov 2, 2012, at 10:13 AM, Max Kovalenko <mkovalenko@cybervisiontech.com> wrote:
Hello,
There are two modes of media stream to be proxied or bypassed.
1. Default - "hard proxy" supplying trans coding, DTMF manipulations, etc. 2. Proxy - "light proxy" supplying only symmetrical RTP for mostly NAT traversal purposes. No media stream parsing is supported 3. Media bypass - RTP streams are bypassing FreeSWITCH at all.
There are also two channel parameters affecting above modes: bypass_media and proxy_media.
- Are these parameters independent? Meaning the combination: bypass_media=true AND proxy_media=true is possible. What effect will be?
- Does it means that if I want to turn on "light proxy" I would always need to set bypass_media=false AND proxy_media=true?
- How to set "hard proxy" (full media proxy) per channel before to bridge legs?
Waiting for your replay ASAP. Thank you in advance.
Will proxy mode 2 work with codecs not supported by freeswitch? On Friday 02 November 2012 11:39:27 Michael Jerris wrote:
There should be no reason to ever use proxy mode (2).
default mode that you call "hard proxy" requires no settings to set it, its the default. On Nov 2, 2012, at 10:13 AM, Max Kovalenko <mkovalenko@cybervisiontech.com> wrote:
Hello,
There are two modes of media stream to be proxied or bypassed.
1. Default - "hard proxy" supplying trans coding, DTMF manipulations, etc. 2. Proxy - "light proxy" supplying only symmetrical RTP for mostly NAT traversal purposes. No media stream parsing is supported 3. Media bypass - RTP streams are bypassing FreeSWITCH at all.
There are also two channel parameters affecting above modes: bypass_media and proxy_media.
- Are these parameters independent? Meaning the combination: bypass_media=true AND proxy_media=true is possible. What effect will be?
- Does it means that if I want to turn on "light proxy" I would always need to set bypass_media=false AND proxy_media=true?
- How to set "hard proxy" (full media proxy) per channel before to bridge legs?
Waiting for your replay ASAP. Thank you in advance.
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
Yes, you can pass-thru g729. 2012/11/2 Sergey Okhapkin <sos@sokhapkin.dyndns.org>
Will proxy mode 2 work with codecs not supported by freeswitch?
On Friday 02 November 2012 11:39:27 Michael Jerris wrote:
There should be no reason to ever use proxy mode (2).
default mode that you call "hard proxy" requires no settings to set it, its the default. On Nov 2, 2012, at 10:13 AM, Max Kovalenko < mkovalenko@cybervisiontech.com> wrote:
Hello,
There are two modes of media stream to be proxied or bypassed.
1. Default - "hard proxy" supplying trans coding, DTMF manipulations, etc. 2. Proxy - "light proxy" supplying only symmetrical RTP for mostly NAT traversal purposes. No media stream parsing is supported 3. Media bypass - RTP streams are bypassing FreeSWITCH at all.
There are also two channel parameters affecting above modes: bypass_media and proxy_media.
- Are these parameters independent? Meaning the combination: bypass_media=true AND proxy_media=true is possible. What effect will be?
- Does it means that if I want to turn on "light proxy" I would always need to set bypass_media=false AND proxy_media=true?
- How to set "hard proxy" (full media proxy) per channel before to bridge legs?
Waiting for your replay ASAP. Thank you in advance.
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
So, there there is a reason to use proxy mode (2) sometime. On Saturday 03 November 2012 15:59:01 Anton Kvashenkin wrote:
Yes, you can pass-thru g729.
2012/11/2 Sergey Okhapkin <sos@sokhapkin.dyndns.org>
Will proxy mode 2 work with codecs not supported by freeswitch?
On Friday 02 November 2012 11:39:27 Michael Jerris wrote:
There should be no reason to ever use proxy mode (2).
default mode that you call "hard proxy" requires no settings to set it,
its
the default. On Nov 2, 2012, at 10:13 AM, Max Kovalenko <
mkovalenko@cybervisiontech.com>
wrote:
Hello,
There are two modes of media stream to be proxied or bypassed.
1. Default - "hard proxy" supplying trans coding, DTMF manipulations,
etc.
2. Proxy - "light proxy" supplying only symmetrical RTP for mostly NAT traversal purposes. No media stream parsing is supported 3. Media
bypass
- RTP streams are bypassing FreeSWITCH at all.
There are also two channel parameters affecting above modes: bypass_media
and proxy_media.
- Are these parameters independent? Meaning the combination: bypass_media=true AND proxy_media=true is possible. What effect will
be?
- Does it means that if I want to turn on "light proxy" I would always need to set bypass_media=false AND proxy_media=true?
- How to set "hard proxy" (full media proxy) per channel before to
bridge
legs?
Waiting for your replay ASAP. Thank you in advance.
________________________________________________________________________ _ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
The correct solution for this is to add passthrough codecs for those that are not supported. On Nov 3, 2012, at 9:55 AM, Sergey Okhapkin <sos@sokhapkin.dyndns.org> wrote:
So, there there is a reason to use proxy mode (2) sometime.
On Saturday 03 November 2012 15:59:01 Anton Kvashenkin wrote:
Yes, you can pass-thru g729.
2012/11/2 Sergey Okhapkin <sos@sokhapkin.dyndns.org>
Will proxy mode 2 work with codecs not supported by freeswitch?
On Friday 02 November 2012 11:39:27 Michael Jerris wrote:
There should be no reason to ever use proxy mode (2).
default mode that you call "hard proxy" requires no settings to set it,
its
the default. On Nov 2, 2012, at 10:13 AM, Max Kovalenko <
mkovalenko@cybervisiontech.com>
wrote:
Hello,
There are two modes of media stream to be proxied or bypassed.
1. Default - "hard proxy" supplying trans coding, DTMF manipulations,
etc.
2. Proxy - "light proxy" supplying only symmetrical RTP for mostly NAT traversal purposes. No media stream parsing is supported 3. Media
bypass
- RTP streams are bypassing FreeSWITCH at all.
There are also two channel parameters affecting above modes: bypass_media
and proxy_media.
- Are these parameters independent? Meaning the combination: bypass_media=true AND proxy_media=true is possible. What effect will
be?
- Does it means that if I want to turn on "light proxy" I would always need to set bypass_media=false AND proxy_media=true?
- How to set "hard proxy" (full media proxy) per channel before to
bridge
legs?
Waiting for your replay ASAP. Thank you in advance.
participants (5)
-
Anton Kvashenkin
-
Ken Rice
-
Max Kovalenko
-
Michael Jerris
-
Sergey Okhapkin