Problems with Mod_openMRCP
I'm getting the following errors when trying to run the example in the wiki: http://wiki.freeswitch.org/wiki/Mod_openmrcp 2008-11-28 09:59:54 [DEBUG] switch_core_session.c:435 switch_core_session_receive_message() Send signal sofia/internal/1000@10.0.0.2 [BREAK] 2008-11-28 09:59:54 [DEBUG] sofia.c:2269 sofia_handle_sip_i_state() Channel sofia/internal/1000@10.0.0.2 entering state [completed] 2008-11-28 09:59:54 [NOTICE] mod_spidermonkey.c:2034 session_answer() Channel [sofia/internal/1000@10.0.0.2] has been answered 2008-11-28 09:59:54 [DEBUG] mod_spidermonkey.c:1851 init_speech_engine() Raw Codec Activation Success L16@8000hz 1 channel 20ms 2008-11-28 09:59:54 [DEBUG] mod_openmrcp.c:634 openmrcp_tts_open() Create Synthesizer Channel 2008-11-28 09:59:54 [DEBUG] sofia.c:2269 sofia_handle_sip_i_state() Channel sofia/internal/1000@10.0.0.2 entering state [ready] 2008-11-28 09:59:59 [ERR] mod_openmrcp.c:643 openmrcp_tts_open() No response from client stack 2008-11-28 09:59:59 [ERR] mod_openmrcp.c:647 openmrcp_tts_open() No synthesizer channel available 2008-11-28 09:59:59 [ERR] mod_spidermonkey.c:1859 init_speech_engine() Invalid TTS module! 2008-11-28 09:59:59 [ERR] inline:1 mod_spidermonkey()? Cannot allocate speech engine! 2008-11-28 09:59:59 [NOTICE] switch_core_state_machine.c:160 switch_core_standard_on_execute() Hangup sofia/internal/1000@10.0.0.2 [CS_EXECUTE] [NORMAL_CLEARING] 2008-11-28 09:59:59 [DEBUG] switch_channel.c:1449 switch_channel_perform_hangup() Send signal sofia/internal/1000@10.0.0.2 [KILL] 2008-11-28 09:59:59 [DEBUG] switch_core_session.c:727 switch_core_session_signal_state_change() Send signal sofia/internal/1000@10.0.0.2 [BREAK] 2008-11-28 09:59:59 [DEBUG] switch_core_state_machine.c:432 switch_core_session_run() (sofia/internal/1000@10.0.0.2) State EXECUTE going to sleep 2008-11-28 09:59:59 [DEBUG] switch_core_state_machine.c:367 switch_core_session_run() (sofia/internal/1000@10.0.0.2) Running State Change CS_HANGUP 2008-11-28 09:59:59 [DEBUG] switch_core_state_machine.c:395 switch_core_session_run() (sofia/internal/1000@10.0.0.2) State HANGUP 2008-11-28 09:59:59 [DEBUG] mod_sofia.c:276 sofia_on_hangup() Channel sofia/internal/1000@10.0.0.2 hanging up, cause: NORMAL_CLEARING 2008-11-28 09:59:59 [DEBUG] mod_sofia.c:333 sofia_on_hangup() Sending BYE to sofia/internal/1000@10.0.0.2 2008-11-28 09:59:59 [DEBUG] switch_core_state_machine.c:46 switch_core_standard_on_hangup() sofia/internal/1000@10.0.0.2 Standard HANGUP, cause: NORMAL_CLEARING 2008-11-28 09:59:59 [DEBUG] switch_core_state_machine.c:395 switch_core_session_run() (sofia/internal/1000@10.0.0.2) State HANGUP going to sleep 2008-11-28 09:59:59 [DEBUG] switch_core_session.c:860 switch_core_session_thread() Session 1 (sofia/internal/1000@10.0.0.2) Locked, Waiting on external entities 2008-11-28 09:59:59 [NOTICE] switch_core_session.c:878 switch_core_session_thread() Session 1 (sofia/internal/1000@10.0.0.2) Ended 2008-11-28 09:59:59 [NOTICE] switch_core_session.c:880 switch_core_session_thread() Close Channel sofia/internal/1000@10.0.0.2 [CS_HANGUP] 2008-11-28 10:00:26 [DEBUG] mod_openmrcp.c:167 openmrcp_on_session_terminate() on_session_terminate called I believe I followed the instructions correctly but I can't get openmrcp to connect with Cepstrals TTS.
the guy who made mod_openmrcp has stopped development and is now making a new library called unimrcp it will take some time to create a new module and remove the now unsupported openmrcp. On Fri, Nov 28, 2008 at 12:15 PM, <mszlazak@aol.com> wrote:
I'm getting the following errors when trying to run the example in the wiki: http://wiki.freeswitch.org/wiki/Mod_openmrcp
2008-11-28 09:59:54 [DEBUG] switch_core_session.c:435 switch_core_session_receive_message() Send signal sofia/internal/ 1000@10.0.0.2 [BREAK] 2008-11-28 09:59:54 [DEBUG] sofia.c:2269 sofia_handle_sip_i_state() Channel sofia/internal/1000@10.0.0.2 entering state [completed] 2008-11-28 09:59:54 [NOTICE] mod_spidermonkey.c:2034 session_answer() Channel [sofia/internal/1000@10.0.0.2] has been answered 2008-11-28 09:59:54 [DEBUG] mod_spidermonkey.c:1851 init_speech_engine() Raw Codec Activation Success L16@8000hz 1 channel 20ms 2008-11-28 09:59:54 [DEBUG] mod_openmrcp.c:634 openmrcp_tts_open() Create Synthesizer Channel 2008-11-28 09:59:54 [DEBUG] sofia.c:2269 sofia_handle_sip_i_state() Channel sofia/internal/1000@10.0.0.2 entering state [ready]
2008-11-28 09:59:59 [ERR] mod_openmrcp.c:643 openmrcp_tts_open() No response from client stack 2008-11-28 09:59:59 [ERR] mod_openmrcp.c:647 openmrcp_tts_open() No synthesizer channel available 2008-11-28 09:59:59 [ERR] mod_spidermonkey.c:1859 init_speech_engine() Invalid TTS module! 2008-11-28 09:59:59 [ERR] inline:1 mod_spidermonkey() Cannot allocate speech engine!
2008-11-28 09:59:59 [NOTICE] switch_core_state_machine.c:160 switch_core_standard_on_execute() Hangup sofia/internal/1000@10.0.0.2[CS_EXECUTE] [NORMAL_CLEARING] 2008-11-28 09:59:59 [DEBUG] switch_channel.c:1449 switch_channel_perform_hangup() Send signal sofia/internal/1000@10.0.0.2[KILL] 2008-11-28 09:59:59 [DEBUG] switch_core_session.c:727 switch_core_session_signal_state_change() Send signal sofia/internal/ 1000@10.0.0.2 [BREAK] 2008-11-28 09:59:59 [DEBUG] switch_core_state_machine.c:432 switch_core_session_run() (sofia/internal/1000@10.0.0.2) State EXECUTE going to sleep 2008-11-28 09:59:59 [DEBUG] switch_core_state_machine.c:367 switch_core_session_run() (sofia/internal/1000@10.0.0.2) Running State Change CS_HANGUP 2008-11-28 09:59:59 [DEBUG] switch_core_state_machine.c:395 switch_core_session_run() (sofia/internal/1000@10.0.0.2) State HANGUP 2008-11-28 09:59:59 [DEBUG] mod_sofia.c:276 sofia_on_hangup() Channel sofia/internal/1000@10.0.0.2 hanging up, cause: NORMAL_CLEARING 2008-11-28 09:59:59 [DEBUG] mod_sofia.c:333 sofia_on_hangup() Sending BYE to sofia/internal/1000@10.0.0.2 2008-11-28 09:59:59 [DEBUG] switch_core_state_machine.c:46 switch_core_standard_on_hangup() sofia/internal/1000@10.0.0.2 Standard HANGUP, cause: NORMAL_CLEARING 2008-11-28 09:59:59 [DEBUG] switch_core_state_machine.c:395 switch_core_session_run() (sofia/internal/1000@10.0.0.2) State HANGUP going to sleep 2008-11-28 09:59:59 [DEBUG] switch_core_session.c:860 switch_core_session_thread() Session 1 (sofia/internal/1000@10.0.0.2) Locked, Waiting on external entities 2008-11-28 09:59:59 [NOTICE] switch_core_session.c:878 switch_core_session_thread() Session 1 (sofia/internal/1000@10.0.0.2) Ended 2008-11-28 09:59:59 [NOTICE] switch_core_session.c:880 switch_core_session_thread() Close Channel sofia/internal/1000@10.0.0.2[CS_HANGUP] 2008-11-28 10:00:26 [DEBUG] mod_openmrcp.c:167 openmrcp_on_session_terminate() on_session_terminate called
I believe I followed the instructions correctly but I can't get openmrcp to connect with Cepstrals TTS.
------------------------------ Tis the season to save your money! Get the new AOL Holiday Toolbar<http://toolbar.aol.com/holiday/download.html?ncid=emlweusdown00000008>for money saving offers and gift ideas.
_______________________________________________ Freeswitch-users mailing list Freeswitch-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- Anthony Minessale II FreeSWITCH http://www.freeswitch.org/ ClueCon http://www.cluecon.com/ AIM: anthm MSN:anthony_minessale@hotmail.com <MSN%3Aanthony_minessale@hotmail.com> GTALK/JABBER/PAYPAL:anthony.minessale@gmail.com<PAYPAL%3Aanthony.minessale@gmail.com> IRC: irc.freenode.net #freeswitch FreeSWITCH Developer Conference sip:888@conference.freeswitch.org <sip%3A888@conference.freeswitch.org> iax:guest@conference.freeswitch.org/888 googletalk:conf+888@conference.freeswitch.org<googletalk%3Aconf%2B888@conference.freeswitch.org> pstn:213-799-1400
Hi Anthony, Oh! OK. So is this module "totally broken". I say this because I can't seem to get it to work at all with the example in that Mod_openmrcp wiki page but I thought it might because I'm not be using the right Cepstral software (freetrial download versus the paided for SDK) or that I'm not using the right port numbers or something else I didn't do. I used TcpView to look at local port associated with my Cepstral software and changed a few things but still nothing. I changed the loglevel setting to 7 in the wiki's example but I don't see the kind of output on the console that I would expect for debug mode. Thanks. Mark. -----Original Message----- From: Anthony Minessale <anthony.minessale@gmail.com> To: freeswitch-users@lists.freeswitch.org Sent: Mon, 1 Dec 2008 9:37 am Subject: Re: [Freeswitch-users] Problems with Mod_openMRCP the guy who made mod_openmrcp has stopped development and is now making a new library called unimrcp it will take some time to create a new module and remove the now unsupported openmrcp. On Fri, Nov 28, 2008 at 12:15 PM, <mszlazak@aol.com> wrote: I'm getting the following errors when trying to run the example in the wiki: http://wiki.freeswitch.org/wiki/Mod_openmrcp 2008-11-28 09:59:54 [DEBUG] switch_core_session.c:435 switch_core_session_receive_message() Send signal sofia/internal/1000@10.0.0.2 [BREAK] 2008-11-28 09:59:54 [DEBUG] sofia.c:2269 sofia_handle_sip_i_state() Channel sofia/internal/1000@10.0.0.2 entering state [completed] 2008-11-28 09:59:54 [NOTICE] mod_spidermonkey.c:2034 session_answer() Channel [sofia/internal/1000@10.0.0.2] has been answered 2008-11-28 09:59:54 [DEBUG] mod_spidermonkey.c:1851 init_speech_engine() Raw Codec Activation Success L16@8000hz 1 channel 20ms 2008-11-28 09:59:54 [DEBUG] mod_openmrcp.c:634 openmrcp_tts_open() Create Synthesizer Channel 2008-11-28 09:59:54 [DEBUG] sofia.c:2269 sofia_handle_sip_i_state() Channel sofia/internal/1000@10.0.0.2 entering state [ready] 2008-11-28 09:59:59 [ERR] mod_openmrcp.c:643 openmrcp_tts_open() No response from client stack 2008-11-28 09:59:59 [ERR] mod_openmrcp.c:647 openmrcp_tts_open() No synthesizer channel available 2008-11-28 09:59:59 [ERR] mod_spidermonkey.c:1859 init_speech_engine() Invalid TTS module! 2008-11-28 09:59:59 [ERR] inline:1 mod_spidermonkey()? Cannot allocate speech engine! 2008-11-28 09:59:59 [NOTICE] switch_core_state_machine.c:160 switch_core_standard_on_execute() Hangup sofia/internal/1000@10.0.0.2 [CS_EXECUTE] [NORMAL_CLEARING] 2008-11-28 09:59:59 [DEBUG] switch_channel.c:1449 switch_channel_perform_hangup() Send signal sofia/internal/1000@10.0.0.2 [KILL] 2008-11-28 09:59:59 [DEBUG] switch_core_session.c:727 switch_core_session_signal_state_change() Send signal sofia/internal/1000@10.0.0.2 [BREAK] 2008-11-28 09:59:59 [DEBUG] switch_core_state_machine.c:432 switch_core_session_run() (sofia/internal/1000@10.0.0.2) State EXECUTE going to sleep 2008-11-28 09:59:59 [DEBUG] switch_core_state_machine.c:367 switch_core_session_run() (sofia/internal/1000@10.0.0.2) Running State Change CS_HANGUP 2008-11-28 09:59:59 [DEBUG] switch_core_state_machine.c:395 switch_core_session_run() (sofia/internal/1000@10.0.0.2) State HANGUP 2008-11-28 09:59:59 [DEBUG] mod_sofia.c:276 sofia_on_hangup() Channel sofia/internal/1000@10.0.0.2 hanging up, cause: NORMAL_CLEARING 2008-11-28 09:59:59 [DEBUG] mod_sofia.c:333 sofia_on_hangup() Sending BYE to sofia/internal/1000@10.0.0.2 2008-11-28 09:59:59 [DEBUG] switch_core_state_machine.c:46 switch_core_standard_on_hangup() sofia/internal/1000@10.0.0.2 Standard HANGUP, cause: NORMAL_CLEARING 2008-11-28 09:59:59 [DEBUG] switch_core_state_machine.c:395 switch_core_session_run() (sofia/internal/1000@10.0.0.2) State HANGUP going to sleep 2008-11-28 09:59:59 [DEBUG] switch_core_session.c:860 switch_core_session_thread() Session 1 (sofia/internal/1000@10.0.0.2) Locked, Waiting on external entities 2008-11-28 09:59:59 [NOTICE] switch_core_session.c:878 switch_core_session_thread() Session 1 (sofia/internal/1000@10.0.0.2) Ended 2008-11-28 09:59:59 [NOTICE] switch_core_session.c:880 switch_core_session_thread() Close Channel sofia/internal/1000@10.0.0.2 [CS_HANGUP] 2008-11-28 10:00:26 [DEBUG] mod_openmrcp.c:167 openmrcp_on_session_terminate() on_session_terminate called I believe I followed the instructions correctly but I can't get openmrcp to connect with Cepstrals TTS. Tis the season to save your money! Get the new AOL Holiday Toolbar for money saving offers and gift ideas. _______________________________________________ Freeswitch-users mailing list Freeswitch-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org -- Anthony Minessale II FreeSWITCH http://www.freeswitch.org/ ClueCon http://www.cluecon.com/ AIM: anthm MSN:anthony_minessale@hotmail.com GTALK/JABBER/PAYPAL:anthony.minessale@gmail.com IRC: irc.freenode.net #freeswitch FreeSWITCH Developer Conference sip:888@conference.freeswitch.org iax:guest@conference.freeswitch.org/888 googletalk:conf+888@conference.freeswitch.org pstn:213-799-1400 _______________________________________________ Freeswitch-users mailing list Freeswitch-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
I would not say it is totally broken, it is known to work in quite a few places, but we are unlikely to be doing any new fixes in it. Mike On Dec 1, 2008, at 1:19 PM, mszlazak@aol.com wrote:
Hi Anthony,
Oh! OK.
So is this module "totally broken".
I say this because I can't seem to get it to work at all with the example in that Mod_openmrcp wiki page but I thought it might because I'm not be using the right Cepstral software (freetrial download versus the paided for SDK) or that I'm not using the right port numbers or something else I didn't do. I used TcpView to look at local port associated with my Cepstral software and changed a few things but still nothing. I changed the loglevel setting to 7 in the wiki's example but I don't see the kind of output on the console that I would expect for debug mode.
Thanks. Mark.
MikeJ, if openMRCP isn't totally broken then would you mind helping me get the example in Mod_openMRCP working or something like it since I don't know what the heck I'm doing wrong. I can meet you now over at the IRC channel for Freeswitch users if you like. Thanks. -----Original Message----- From: Michael Jerris <mike@jerris.com> To: freeswitch-users@lists.freeswitch.org Sent: Mon, 1 Dec 2008 10:30 am Subject: Re: [Freeswitch-users] Problems with Mod_openMRCP I would not say it is totally broken, it is known to work in quite a few places, but we are unlikely to be doing any new fixes in it. Mike On Dec 1, 2008, at 1:19 PM, mszlazak@aol.com wrote: Hi Anthony, Oh! OK. So is this module "totally broken". I say this because I can't seem to get it to work at all with the example in that Mod_openmrcp wiki page but I thought it might because I'm not be using the right Cepstral software (freetrial download versus the paided for SDK) or that I'm not using the right port numbers or something else I didn't do. I used TcpView to look at local port associated with my Cepstral software and changed a few things but still nothing. I changed the loglevel setting to 7 in the wiki's example but I don't see the kind of output on the console that I would expect for debug mode. Thanks. Mark. = _______________________________________________ Freeswitch-users mailing list Freeswitch-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
Hi Mike, My experience is that it's somewhat broken - it took two trivial tweaks to get it to work with IBM's ASR and TTS, but there's a more intractable problem to do with memory getting overwritten (I assume that this is something to do with something being freed when it shouldn't be) which causes a segfault on the second or third session after the module being loaded. Without wishing to sound like a stuck record, one thing that you guys really ought to do is to decide what's supported and what isn't, and make this obvious - for example, move unsupported modules to a different place in the tree, don't have them built by default, etc. MRCP is in the specsheet on the Wiki. Otherwise folk like Mark and I spend time installing stuff, go round in circles a bit trying to make it work, and then find out (a) that it doesn't and (b) it's not going to be fixed because it's not supported. Cheers -- Dave
I would not say it is totally broken, it is known to work in quite a few places, but we are unlikely to be doing any new fixes in it.
Mike
On Dec 1, 2008, at 1:19 PM, mszlazak@aol.com <mailto:mszlazak@aol.com> wrote:
Hi Anthony,
Oh! OK.
So is this module "totally broken".
I say this because I can't seem to get it to work at all with the example in that Mod_openmrcp wiki page but I thought it might because I'm not be using the right Cepstral software (freetrial download versus the paided for SDK) or that I'm not using the right port numbers or something else I didn't do. I used TcpView to look at local port associated with my Cepstral software and changed a few things but still nothing. I changed the loglevel setting to 7 in the wiki's example but I don't see the kind of output on the console that I would expect for debug mode.
Thanks. Mark.
------------------------------------------------------------------------
_______________________________________________ Freeswitch-users mailing list Freeswitch-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- David Knell, Director, 3C Limited T: 020 8114 8901 F: 020 3002 7257 M: 001 415 630 3031 http://www.3c.co.uk
mod_openmrcp was a contribution to the community by a 3rd party individual. As i have clearly stated in 2 previous emails, the man has decided to discontinue the openmrcp project. So now we are left with the remains of the module and discontinued code. This was not our decision it was his. Since the author of openmrcp has stated that he has a new unimrcp we are certainly going to work towards getting mod_unimrcp to replace mod_openmrcp. He had already commented on that previous thread to state he is willing to consider making a new module. Some people use it without issue which may mean that the crash you reported is windows specific and I do not have a working lab of any mrcp capbable system to try it against in unix for that matter. I have a list of work to do from here to the moon and back so on an issue like this, unless someone can hand me login credentials to some box and give me a phone number to dial to reporduce the issue, it will be a long time until we can deal with it. And the question arises, should we bother working on it anymore if the lib has been abandoned and we cannot even get any support from it's author which is where the problem most likely lies. I try not to get too annoyed by these remarks about what we *ought to do* because I know people lose sight of how much of the work to support the project is done by a small group of 3 people and not the 2000 people it appears to be from the outside looking in. (I've been answering email for 4 hours now) My suggestion is to pool some cash and pay the guy to make mod_unimrcp for FS that we can maintain in tree knowing the development can be supported by the original author. On Mon, Dec 1, 2008 at 12:51 PM, David Knell <dave@3c.co.uk> wrote:
Hi Mike,
My experience is that it's somewhat broken - it took two trivial tweaks to get it to work with IBM's ASR and TTS, but there's a more intractable problem to do with memory getting overwritten (I assume that this is something to do with something being freed when it shouldn't be) which causes a segfault on the second or third session after the module being loaded.
Without wishing to sound like a stuck record, one thing that you guys really ought to do is to decide what's supported and what isn't, and make this obvious - for example, move unsupported modules to a different place in the tree, don't have them built by default, etc. MRCP is in the specsheet on the Wiki. Otherwise folk like Mark and I spend time installing stuff, go round in circles a bit trying to make it work, and then find out (a) that it doesn't and (b) it's not going to be fixed because it's not supported.
Cheers --
Dave
I would not say it is totally broken, it is known to work in quite a few places, but we are unlikely to be doing any new fixes in it. Mike
On Dec 1, 2008, at 1:19 PM, mszlazak@aol.com wrote:
Hi Anthony,
Oh! OK.
So is this module "totally broken".
I say this because I can't seem to get it to work at all with the example in that Mod_openmrcp wiki page but I thought it might because I'm not be using the right Cepstral software (freetrial download versus the paided for SDK) or that I'm not using the right port numbers or something else I didn't do. I used TcpView to look at local port associated with my Cepstral software and changed a few things but still nothing. I changed the loglevel setting to 7 in the wiki's example but I don't see the kind of output on the console that I would expect for debug mode.
Thanks. Mark.
------------------------------
_______________________________________________ Freeswitch-users mailing listFreeswitch-users@lists.freeswitch.orghttp://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-usershttp://www.frees...
-- David Knell, Director, 3C Limited T: 020 8114 8901 F: 020 3002 7257 M: 001 415 630 3031http://www.3c.co.uk
_______________________________________________ Freeswitch-users mailing list Freeswitch-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- Anthony Minessale II FreeSWITCH http://www.freeswitch.org/ ClueCon http://www.cluecon.com/ AIM: anthm MSN:anthony_minessale@hotmail.com <MSN%3Aanthony_minessale@hotmail.com> GTALK/JABBER/PAYPAL:anthony.minessale@gmail.com<PAYPAL%3Aanthony.minessale@gmail.com> IRC: irc.freenode.net #freeswitch FreeSWITCH Developer Conference sip:888@conference.freeswitch.org <sip%3A888@conference.freeswitch.org> iax:guest@conference.freeswitch.org/888 googletalk:conf+888@conference.freeswitch.org<googletalk%3Aconf%2B888@conference.freeswitch.org> pstn:213-799-1400
FYI, I've updated the wiki to reflect the current status of OpenMRCP with a link to the new UniMRCP project. Hopefully enough people who want MRCP in FS will support UniMRCP... -MC On Mon, Dec 1, 2008 at 11:17 AM, Anthony Minessale < anthony.minessale@gmail.com> wrote:
mod_openmrcp was a contribution to the community by a 3rd party individual.
As i have clearly stated in 2 previous emails, the man has decided to discontinue the openmrcp project. So now we are left with the remains of the module and discontinued code. This was not our decision it was his.
Since the author of openmrcp has stated that he has a new unimrcp we are certainly going to work towards getting mod_unimrcp to replace mod_openmrcp. He had already commented on that previous thread to state he is willing to consider making a new module.
Some people use it without issue which may mean that the crash you reported is windows specific and I do not have a working lab of any mrcp capbable system to try it against in unix for that matter. I have a list of work to do from here to the moon and back so on an issue like this, unless someone can hand me login credentials to some box and give me a phone number to dial to reporduce the issue, it will be a long time until we can deal with it. And the question arises, should we bother working on it anymore if the lib has been abandoned and we cannot even get any support from it's author which is where the problem most likely lies.
I try not to get too annoyed by these remarks about what we *ought to do* because I know people lose sight of how much of the work to support the project is done by a small group of 3 people and not the 2000 people it appears to be from the outside looking in. (I've been answering email for 4 hours now)
My suggestion is to pool some cash and pay the guy to make mod_unimrcp for FS that we can maintain in tree knowing the development can be supported by the original author.
On Mon, Dec 1, 2008 at 12:51 PM, David Knell <dave@3c.co.uk> wrote:
Hi Mike,
My experience is that it's somewhat broken - it took two trivial tweaks to get it to work with IBM's ASR and TTS, but there's a more intractable problem to do with memory getting overwritten (I assume that this is something to do with something being freed when it shouldn't be) which causes a segfault on the second or third session after the module being loaded.
Without wishing to sound like a stuck record, one thing that you guys really ought to do is to decide what's supported and what isn't, and make this obvious - for example, move unsupported modules to a different place in the tree, don't have them built by default, etc. MRCP is in the specsheet on the Wiki. Otherwise folk like Mark and I spend time installing stuff, go round in circles a bit trying to make it work, and then find out (a) that it doesn't and (b) it's not going to be fixed because it's not supported.
Cheers --
Dave
I would not say it is totally broken, it is known to work in quite a few places, but we are unlikely to be doing any new fixes in it. Mike
On Dec 1, 2008, at 1:19 PM, mszlazak@aol.com wrote:
Hi Anthony,
Oh! OK.
So is this module "totally broken".
I say this because I can't seem to get it to work at all with the example in that Mod_openmrcp wiki page but I thought it might because I'm not be using the right Cepstral software (freetrial download versus the paided for SDK) or that I'm not using the right port numbers or something else I didn't do. I used TcpView to look at local port associated with my Cepstral software and changed a few things but still nothing. I changed the loglevel setting to 7 in the wiki's example but I don't see the kind of output on the console that I would expect for debug mode.
Thanks. Mark.
------------------------------
_______________________________________________ Freeswitch-users mailing listFreeswitch-users@lists.freeswitch.orghttp://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-usershttp://www.frees...
-- David Knell, Director, 3C Limited T: 020 8114 8901 F: 020 3002 7257 M: 001 415 630 3031http://www.3c.co.uk
_______________________________________________ Freeswitch-users mailing list Freeswitch-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- Anthony Minessale II
FreeSWITCH http://www.freeswitch.org/ ClueCon http://www.cluecon.com/
AIM: anthm MSN:anthony_minessale@hotmail.com <MSN%3Aanthony_minessale@hotmail.com> GTALK/JABBER/PAYPAL:anthony.minessale@gmail.com<PAYPAL%3Aanthony.minessale@gmail.com> IRC: irc.freenode.net #freeswitch
FreeSWITCH Developer Conference sip:888@conference.freeswitch.org <sip%3A888@conference.freeswitch.org> iax:guest@conference.freeswitch.org/888 googletalk:conf+888@conference.freeswitch.org<googletalk%3Aconf%2B888@conference.freeswitch.org> pstn:213-799-1400
_______________________________________________ Freeswitch-users mailing list Freeswitch-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
Does "bridging" a call from FS to Voxeo's Prophecy server require openMRCP? If not then the other issue I might have is a database look up that is part of the dialogue that maybe need as the person response to prompts from the asr. It's possible to run a php script for the database stuff that Prophecy might need or could that happen via Javascript in FS? Then after the dialogue has completed I go from Prophecy back to FS. -----Original Message----- From: Anthony Minessale <anthony.minessale@gmail.com> To: freeswitch-users@lists.freeswitch.org Sent: Mon, 1 Dec 2008 11:17 am Subject: Re: [Freeswitch-users] Problems with Mod_openMRCP mod_openmrcp was a contribution to the community by a 3rd party individual. As i have clearly stated in 2 previous emails, the man has decided to discontinue the openmrcp project. So now we are left with the remains of the module and discontinued code.? This was not our decision it was his. Since the author of openmrcp has stated that he has a new unimrcp we are certainly going to work towards getting mod_unimrcp to replace mod_openmrcp.? He had already commented on that previous thread to state he is willing to consider making a new module. Some people use it without issue which may mean that the crash you reported is windows specific and I do not have a working lab of any mrcp capbable system to try it against in unix for that matter.? I have a list of work to do from here to the moon and back so on an issue like this, unless someone can hand me login credentials to some box and give me a phone number to dial to reporduce the issue, it will be a long time until we can deal with it.? And the question arises, should we bother working on it anymore if the lib has been abandoned and we cannot even get any support from it's author which is where the problem most likely lies. I try not to get too annoyed by these remarks about what we *ought to do* because I know people lose sight of how much of the work to support the project is done by a small group of 3 people and not the 2000 people it appears to be from the outside looking in. (I've been answering email for 4 hours now) My suggestion is to pool some cash and pay the guy to make mod_unimrcp for FS that we can maintain in tree knowing the development can be supported by the original author. On Mon, Dec 1, 2008 at 12:51 PM, David Knell <dave@3c.co.uk> wrote: Hi Mike, My experience is that it's somewhat broken - it took two trivial tweaks to get it to work with IBM's ASR and TTS, but there's a more intractable problem to do with memory getting overwritten (I assume that this is something to do with something being freed when it shouldn't be) which causes a segfault on the second or third session after the module being loaded. Without wishing to sound like a stuck record, one thing that you guys really ought to do is to decide what's supported and what isn't, and make this obvious - for example, move unsupported modules to a different place in the tree, don't have them built by default, etc.? MRCP is in the specsheet on the Wiki.? Otherwise folk like Mark and I spend time installing stuff, go round in circles a bit trying to make it work, and then find out (a) that it doesn't and (b) it's not going to be fixed because it's not supported. Cheers -- Dave I would not say it is totally broken, it is known to work in quite a few places, but we are unlikely to be doing any new fixes in it. Mike On Dec 1, 2008, at 1:19 PM, mszlazak@aol.com wrote: Hi Anthony, Oh! OK. So is this module "totally broken". I say this because I can't seem to get it to work at all with the example in that Mod_openmrcp wiki page but I thought it might because I'm not be using the right Cepstral software (freetrial download versus the paided for SDK) or that I'm not using the right port numbers or something else I didn't do. I used TcpView to look at local port associated with my Cepstral software and changed a few things but still nothing. I changed the loglevel setting to 7 in the wiki's example but I don't see the kind of output on the console that I would expect for debug mode. Thanks. Mark. _______________________________________________ Freeswitch-users mailing list Freeswitch-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org -- David Knell, Director, 3C Limited T: 020 8114 8901 F: 020 3002 7257 M: 001 415 630 3031 http://www.3c.co.uk _______________________________________________ Freeswitch-users mailing list Freeswitch-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org -- Anthony Minessale II FreeSWITCH http://www.freeswitch.org/ ClueCon http://www.cluecon.com/ AIM: anthm MSN:anthony_minessale@hotmail.com GTALK/JABBER/PAYPAL:anthony.minessale@gmail.com IRC: irc.freenode.net #freeswitch FreeSWITCH Developer Conference sip:888@conference.freeswitch.org iax:guest@conference.freeswitch.org/888 googletalk:conf+888@conference.freeswitch.org pstn:213-799-1400 _______________________________________________ Freeswitch-users mailing list Freeswitch-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
Just to follow up. Moshe Yudkowsky has an article on "Routing calls from FreeSwitch to Prophecy":? http://www.prophecy2006.com/node/145 My problem is that Freeswitch and Prophecy need to be on the same machine BUT both need to bind to port 5060 so I'm getting errors from one or the other depending who's running first. So can I change what port(s) FS uses and that way avoid this conflict? Maybe, this might let me bridge the call via FreeSwitch to Prophecy similar to what Moshe's article discusses??? -----Original Message----- From: mszlazak@aol.com To: freeswitch-users@lists.freeswitch.org Sent: Mon, 1 Dec 2008 4:44 pm Subject: Re: [Freeswitch-users] Problems with Mod_openMRCP Does "bridging" a call from FS to Voxeo's Prophecy server require openMRCP? If not then the other issue I might have is a database look up that is part of the dialogue that maybe need as the person response to prompts from the asr. It's possible to run a php script for the database stuff that Prophecy might need or could that happen via Javascript in FS? Then after the dialogue has completed I go from Prophecy back to FS. -----Original Message----- From: Anthony Minessale <anthony.minessale@gmail.com> To: freeswitch-users@lists.freeswitch.org Sent: Mon, 1 Dec 2008 11:17 am Subject: Re: [Freeswitch-users] Problems with Mod_openMRCP mod_openmrcp was a contribution to the community by a 3rd party individual. As i have clearly stated in 2 previous emails, the man has decided to discontinue the openmrcp project. So now we are left with the remains of the module and discontinued code.? This was not our decision it was his. Since the author of openmrcp has stated that he has a new unimrcp we are certainly going to work towards getting mod_unimrcp to replace mod_openmrcp.? He had already commented on that previous thread to state he is willing to consider making a new module. Some people use it without issue which may mean that the crash you reported is windows specific and I do not have a working lab of any mrcp capbable system to try it against in unix for that matter.? I have a list of work to do from here to the moon and back so on an issue like this, unless someone can hand me login credentials to some box and give me a phone number to dial to reporduce the issue, it will be a long time until we can deal with it.? And the question arises, should we bother working on it anymore if the lib has been abandoned and we cannot even get any support from it's author which is where the problem most likely lies. I try not to get too annoyed by these remarks about what we *ought to do* because I know people lose sight of how much of the work to support the project is done by a small group of 3 people and not the 2000 people it appears to be from the outside looking in. (I've been answering email for 4 hours now) My suggestion is to pool some cash and pay the guy to make mod_unimrcp for FS that we can maintain in tree knowing the development can be supported by the original author. On Mon, Dec 1, 2008 at 12:51 PM, David Knell <dave@3c.co.uk> wrote: Hi Mike, My experience is that it's somewhat broken - it took two trivial tweaks to get it to work with IBM's ASR and TTS, but there's a more intractable problem to do with memory getting overwritten (I assume that this is something to do with something being freed when it shouldn't be) which causes a segfault on the second or third session after the module being loaded. Without wishing to sound like a stuck record, one thing that you guys really ought to do is to decide what's supported and what isn't, and make this obvious - for example, move unsupported modules to a different place in the tree, don't have them built by default, etc.? MRCP is in the specsheet on the Wiki.? Otherwise folk like Mark and I spend time installing stuff, go round in circles a bit trying to make it work, and then find out (a) that it doesn't and (b) it's not going to be fixed because it's not supported. Cheers -- Dave I would not say it is totally broken, it is known to work in quite a few places, but we are unlikely to be doing any new fixes in it. Mike On Dec 1, 2008, at 1:19 PM, mszlazak@aol.com wrote: Hi Anthony, Oh! OK. So is this module "totally broken". I say this because I can't seem to get it to work at all with the example in that Mod_openmrcp wiki page but I thought it might because I'm not be using the right Cepstral software (freetrial download versus the paided for SDK) or that I'm not using the right port numbers or something else I didn't do. I used TcpView to look at local port associated with my Cepstral software and changed a few things but still nothing. I changed the loglevel setting to 7 in the wiki's example but I don't see the kind of output on the console that I would expect for debug mode. Thanks. Mark. _______________________________________________ Freeswitch-users mailing list Freeswitch-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org -- David Knell, Director, 3C Limited T: 020 8114 8901 F: 020 3002 7257 M: 001 415 630 3031 http://www.3c.co.uk _______________________________________________ Freeswitch-users mailing list Freeswitch-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org -- Anthony Minessale II FreeSWITCH http://www.freeswitch.org/ ClueCon http://www.cluecon.com/ AIM: anthm MSN:anthony_minessale@hotmail.com GTALK/JABBER/PAYPAL:anthony.minessale@gmail.com IRC: irc.freenode.net #freeswitch FreeSWITCH Developer Conference sip:888@conference.freeswitch.org iax:guest@conference.freeswitch.org/888 googletalk:conf+888@conference.freeswitch.org pstn:213-799-1400 _______________________________________________ Freeswitch-users mailing list Freeswitch-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org Tis the season to save your money! Get the new AOL Holiday Toolbar for money saving offers and gift ideas. _______________________________________________ Freeswitch-users mailing list Freeswitch-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
Hi Anthony,
mod_openmrcp was a contribution to the community by a 3rd party individual.
As i have clearly stated in 2 previous emails, the man has decided to discontinue the openmrcp project. So now we are left with the remains of the module and discontinued code. This was not our decision it was his. I absolutely understand this but it's important, from a user point of view, to be able to know which bits of FS are current/supported and which aren't. Some people use it without issue which may mean that the crash you reported is windows specific and I do not have a working lab of any mrcp capbable system to try it against in unix for that matter. I have a list of work to do from here to the moon and back so on an issue like this, unless someone can hand me login credentials to some box and give me a phone number to dial to reporduce the issue, it will be a long time until we can deal with it. It's useful to know that there are people using mod_openmrcp without issue: I did ask here if anyone was a while back, and no-one fessed up. I'll give it a go on a Linux box and report back. And if you'd like a dev/test environment set up, then just tell me which one. And the question arises, should we bother working on it anymore if the lib has been abandoned and we cannot even get any support from it's author which is where the problem most likely lies.
I try not to get too annoyed by these remarks about what we *ought to do* because I know people lose sight of how much of the work to support the project is done by a small group of 3 people and not the 2000 people it appears to be from the outside looking in. (I've been answering email for 4 hours now) Those guys who claim to have all that money in an offshore bank account are lying - you don't have to reply to them in future ;-) Seriously, though, I don't think it's too outrageous an idea to document what's supported and were you (for example) to have suggested that I get in touch with the contributors to the various modules, ask them what their view of its status is, condense the answers in to a list and report back, it's something I'd quite happily do. My suggestion is to pool some cash and pay the guy to make mod_unimrcp for FS that we can maintain in tree knowing the development can be supported by the original author. Quite happy to participate in that, too.. the problem is that I've a demo to do like yesterday and the timescale for mod_unimrcp is a bit on the long side for that. I'd rather not have to do it with Asterisk and Lumenvox..!
Cheers -- Dave
On Mon, Dec 1, 2008 at 12:51 PM, David Knell <dave@3c.co.uk <mailto:dave@3c.co.uk>> wrote:
Hi Mike,
My experience is that it's somewhat broken - it took two trivial tweaks to get it to work with IBM's ASR and TTS, but there's a more intractable problem to do with memory getting overwritten (I assume that this is something to do with something being freed when it shouldn't be) which causes a segfault on the second or third session after the module being loaded.
Without wishing to sound like a stuck record, one thing that you guys really ought to do is to decide what's supported and what isn't, and make this obvious - for example, move unsupported modules to a different place in the tree, don't have them built by default, etc. MRCP is in the specsheet on the Wiki. Otherwise folk like Mark and I spend time installing stuff, go round in circles a bit trying to make it work, and then find out (a) that it doesn't and (b) it's not going to be fixed because it's not supported.
Cheers --
Dave
I would not say it is totally broken, it is known to work in quite a few places, but we are unlikely to be doing any new fixes in it.
Mike
On Dec 1, 2008, at 1:19 PM, mszlazak@aol.com <mailto:mszlazak@aol.com> wrote:
Hi Anthony,
Oh! OK.
So is this module "totally broken".
I say this because I can't seem to get it to work at all with the example in that Mod_openmrcp wiki page but I thought it might because I'm not be using the right Cepstral software (freetrial download versus the paided for SDK) or that I'm not using the right port numbers or something else I didn't do. I used TcpView to look at local port associated with my Cepstral software and changed a few things but still nothing. I changed the loglevel setting to 7 in the wiki's example but I don't see the kind of output on the console that I would expect for debug mode.
Thanks. Mark.
------------------------------------------------------------------------ _______________________________________________ Freeswitch-users mailing list Freeswitch-users@lists.freeswitch.org <mailto:Freeswitch-users@lists.freeswitch.org> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- David Knell, Director, 3C Limited T: 020 8114 8901 F: 020 3002 7257 M: 001 415 630 3031 http://www.3c.co.uk
_______________________________________________ Freeswitch-users mailing list Freeswitch-users@lists.freeswitch.org <mailto:Freeswitch-users@lists.freeswitch.org> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- Anthony Minessale II
FreeSWITCH http://www.freeswitch.org/ ClueCon http://www.cluecon.com/
AIM: anthm MSN:anthony_minessale@hotmail.com <mailto:MSN%3Aanthony_minessale@hotmail.com> GTALK/JABBER/PAYPAL:anthony.minessale@gmail.com <mailto:PAYPAL%3Aanthony.minessale@gmail.com> IRC: irc.freenode.net <http://irc.freenode.net> #freeswitch
FreeSWITCH Developer Conference sip:888@conference.freeswitch.org <mailto:sip%3A888@conference.freeswitch.org> iax:guest@conference.freeswitch.org/888 <http://iax:guest@conference.freeswitch.org/888> googletalk:conf+888@conference.freeswitch.org <mailto:googletalk%3Aconf%2B888@conference.freeswitch.org> pstn:213-799-1400 ------------------------------------------------------------------------
_______________________________________________ Freeswitch-users mailing list Freeswitch-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- David Knell, Director, 3C Limited T: 020 8114 8901 F: 020 3002 7257 M: 001 415 630 3031 http://www.3c.co.uk
If you can get it to break on linux I will ssh in and fix it for you. If you cannot, i can try to fix it for you over rdp but that won't be very fun. We can think about reinstating mod_lumenvox as well as another windows based asr alternative. I deleted it for the same reason we will probably delete mod_openmrcp because nobody was using it and there was no way to support it because our dev licenses had expired. Lumenvox has offered us some new dev licenses to bring it back but I would need someone to actually want it to work to put in charge of it. We will be clear about what is supported and what is not in the 1.0.2 release scheduled to be released in the near future. On Tue, Dec 2, 2008 at 12:11 AM, David Knell <dave@3c.co.uk> wrote:
Hi Anthony,
mod_openmrcp was a contribution to the community by a 3rd party individual.
As i have clearly stated in 2 previous emails, the man has decided to discontinue the openmrcp project. So now we are left with the remains of the module and discontinued code. This was not our decision it was his.
I absolutely understand this but it's important, from a user point of view, to be able to know which bits of FS are current/supported and which aren't.
Some people use it without issue which may mean that the crash you reported is windows specific and I do not have a working lab of any mrcp capbable system to try it against in unix for that matter. I have a list of work to do from here to the moon and back so on an issue like this, unless someone can hand me login credentials to some box and give me a phone number to dial to reporduce the issue, it will be a long time until we can deal with it.
It's useful to know that there are people using mod_openmrcp without issue: I did ask here if anyone was a while back, and no-one fessed up. I'll give it a go on a Linux box and report back. And if you'd like a dev/test environment set up, then just tell me which one.
And the question arises, should we bother working on it anymore if the lib has been abandoned and we cannot even get any support from it's author which is where the problem most likely lies.
I try not to get too annoyed by these remarks about what we *ought to do* because I know people lose sight of how much of the work to support the project is done by a small group of 3 people and not the 2000 people it appears to be from the outside looking in. (I've been answering email for 4 hours now)
Those guys who claim to have all that money in an offshore bank account are lying - you don't have to reply to them in future ;-) Seriously, though, I don't think it's too outrageous an idea to document what's supported and were you (for example) to have suggested that I get in touch with the contributors to the various modules, ask them what their view of its status is, condense the answers in to a list and report back, it's something I'd quite happily do.
My suggestion is to pool some cash and pay the guy to make mod_unimrcp for FS that we can maintain in tree knowing the development can be supported by the original author.
Quite happy to participate in that, too.. the problem is that I've a demo to do like yesterday and the timescale for mod_unimrcp is a bit on the long side for that. I'd rather not have to do it with Asterisk and Lumenvox..!
Cheers --
Dave
On Mon, Dec 1, 2008 at 12:51 PM, David Knell <dave@3c.co.uk> wrote:
Hi Mike,
My experience is that it's somewhat broken - it took two trivial tweaks to get it to work with IBM's ASR and TTS, but there's a more intractable problem to do with memory getting overwritten (I assume that this is something to do with something being freed when it shouldn't be) which causes a segfault on the second or third session after the module being loaded.
Without wishing to sound like a stuck record, one thing that you guys really ought to do is to decide what's supported and what isn't, and make this obvious - for example, move unsupported modules to a different place in the tree, don't have them built by default, etc. MRCP is in the specsheet on the Wiki. Otherwise folk like Mark and I spend time installing stuff, go round in circles a bit trying to make it work, and then find out (a) that it doesn't and (b) it's not going to be fixed because it's not supported.
Cheers --
Dave
I would not say it is totally broken, it is known to work in quite a few places, but we are unlikely to be doing any new fixes in it. Mike
On Dec 1, 2008, at 1:19 PM, mszlazak@aol.com wrote:
Hi Anthony,
Oh! OK.
So is this module "totally broken".
I say this because I can't seem to get it to work at all with the example in that Mod_openmrcp wiki page but I thought it might because I'm not be using the right Cepstral software (freetrial download versus the paided for SDK) or that I'm not using the right port numbers or something else I didn't do. I used TcpView to look at local port associated with my Cepstral software and changed a few things but still nothing. I changed the loglevel setting to 7 in the wiki's example but I don't see the kind of output on the console that I would expect for debug mode.
Thanks. Mark.
------------------------------
_______________________________________________ Freeswitch-users mailing listFreeswitch-users@lists.freeswitch.orghttp://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-usershttp://www.frees...
-- David Knell, Director, 3C Limited T: 020 8114 8901 F: 020 3002 7257 M: 001 415 630 3031http://www.3c.co.uk
_______________________________________________ Freeswitch-users mailing list Freeswitch-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- Anthony Minessale II
FreeSWITCH http://www.freeswitch.org/ ClueCon http://www.cluecon.com/
AIM: anthm MSN:anthony_minessale@hotmail.com <MSN%3Aanthony_minessale@hotmail.com> GTALK/JABBER/PAYPAL:anthony.minessale@gmail.com<PAYPAL%3Aanthony.minessale@gmail.com> IRC: irc.freenode.net #freeswitch
FreeSWITCH Developer Conference sip:888@conference.freeswitch.org <sip%3A888@conference.freeswitch.org> iax:guest@conference.freeswitch.org/888 googletalk:conf+888@conference.freeswitch.org<googletalk%3Aconf%2B888@conference.freeswitch.org> pstn:213-799-1400
------------------------------
_______________________________________________ Freeswitch-users mailing listFreeswitch-users@lists.freeswitch.orghttp://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-usershttp://www.frees...
-- David Knell, Director, 3C Limited T: 020 8114 8901 F: 020 3002 7257 M: 001 415 630 3031http://www.3c.co.uk
_______________________________________________ Freeswitch-users mailing list Freeswitch-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- Anthony Minessale II FreeSWITCH http://www.freeswitch.org/ ClueCon http://www.cluecon.com/ AIM: anthm MSN:anthony_minessale@hotmail.com <MSN%3Aanthony_minessale@hotmail.com> GTALK/JABBER/PAYPAL:anthony.minessale@gmail.com<PAYPAL%3Aanthony.minessale@gmail.com> IRC: irc.freenode.net #freeswitch FreeSWITCH Developer Conference sip:888@conference.freeswitch.org <sip%3A888@conference.freeswitch.org> iax:guest@conference.freeswitch.org/888 googletalk:conf+888@conference.freeswitch.org<googletalk%3Aconf%2B888@conference.freeswitch.org> pstn:213-799-1400
Mark and David, I am willing to help some with testing here as well, if you need it. Ping me directly or we can get on the IRC. I am on Mac OS, but have readily available vm's with Debian, etc. I also have Prophecy. I have a general interest in an ASR solution as well. Voxeo is great, but using it as an MRCP proxy seems odd. As a full fledged VXML solution it is great, if you can afford it. But having a good ASR solution is good first step to trying to get something like OpenVXI working as well. That said, seems like a bounty or money to help FS is a better spend anyway. It is a one time cost, not a variable cost. And it goes straight to the guys doing the real work. I built unimrcp last night, it was quite straight forward. In theory, if I weren't old and my C/autoconf skills rather atrophied, it wouldn't seem like it would be that huge a deal to port/fix openmrcp to unimrcp. Finally, Anthony I was looking at the Lumenvox path as well, but got deterred by the licensing hassle. This seems to be a universal ASR issue. I would reason I can find the old module in SVN? Were they going to grant "community dev" licenses? Again - I am willing to volunteer to do some testing/doc at least. Andy On Dec 2, 2008, at 10:51 AM, Anthony Minessale wrote:
If you can get it to break on linux I will ssh in and fix it for you. If you cannot, i can try to fix it for you over rdp but that won't be very fun.
We can think about reinstating mod_lumenvox as well as another windows based asr alternative. I deleted it for the same reason we will probably delete mod_openmrcp because nobody was using it and there was no way to support it because our dev licenses had expired.
Lumenvox has offered us some new dev licenses to bring it back but I would need someone to actually want it to work to put in charge of it.
We will be clear about what is supported and what is not in the 1.0.2 release scheduled to be released in the near future.
On Tue, Dec 2, 2008 at 12:11 AM, David Knell <dave@3c.co.uk> wrote: Hi Anthony,
mod_openmrcp was a contribution to the community by a 3rd party individual.
As i have clearly stated in 2 previous emails, the man has decided to discontinue the openmrcp project. So now we are left with the remains of the module and discontinued code. This was not our decision it was his. I absolutely understand this but it's important, from a user point of view, to be able to know which bits of FS are current/supported and which aren't.
Some people use it without issue which may mean that the crash you reported is windows specific and I do not have a working lab of any mrcp capbable system to try it against in unix for that matter. I have a list of work to do from here to the moon and back so on an issue like this, unless someone can hand me login credentials to some box and give me a phone number to dial to reporduce the issue, it will be a long time until we can deal with it. It's useful to know that there are people using mod_openmrcp without issue: I did ask here if anyone was a while back, and no-one fessed up. I'll give it a go on a Linux box and report back. And if you'd like a dev/test environment set up, then just tell me which one.
And the question arises, should we bother working on it anymore if the lib has been abandoned and we cannot even get any support from it's author which is where the problem most likely lies.
I try not to get too annoyed by these remarks about what we *ought to do* because I know people lose sight of how much of the work to support the project is done by a small group of 3 people and not the 2000 people it appears to be from the outside looking in. (I've been answering email for 4 hours now) Those guys who claim to have all that money in an offshore bank account are lying - you don't have to reply to them in future ;-) Seriously, though, I don't think it's too outrageous an idea to document what's supported and were you (for example) to have suggested that I get in touch with the contributors to the various modules, ask them what their view of its status is, condense the answers in to a list and report back, it's something I'd quite happily do.
My suggestion is to pool some cash and pay the guy to make mod_unimrcp for FS that we can maintain in tree knowing the development can be supported by the original author. Quite happy to participate in that, too.. the problem is that I've a demo to do like yesterday and the timescale for mod_unimrcp is a bit on the long side for that. I'd rather not have to do it with Asterisk and Lumenvox..!
Cheers --
Dave
On Mon, Dec 1, 2008 at 12:51 PM, David Knell <dave@3c.co.uk> wrote: Hi Mike,
My experience is that it's somewhat broken - it took two trivial tweaks to get it to work with IBM's ASR and TTS, but there's a more intractable problem to do with memory getting overwritten (I assume that this is something to do with something being freed when it shouldn't be) which causes a segfault on the second or third session after the module being loaded.
Without wishing to sound like a stuck record, one thing that you guys really ought to do is to decide what's supported and what isn't, and make this obvious - for example, move unsupported modules to a different place in the tree, don't have them built by default, etc. MRCP is in the specsheet on the Wiki. Otherwise folk like Mark and I spend time installing stuff, go round in circles a bit trying to make it work, and then find out (a) that it doesn't and (b) it's not going to be fixed because it's not supported.
Cheers --
Dave
I would not say it is totally broken, it is known to work in quite a few places, but we are unlikely to be doing any new fixes in it.
Mike
On Dec 1, 2008, at 1:19 PM, mszlazak@aol.com wrote:
Hi Anthony,
Oh! OK.
So is this module "totally broken".
I say this because I can't seem to get it to work at all with the example in that Mod_openmrcp wiki page but I thought it might because I'm not be using the right Cepstral software (freetrial download versus the paided for SDK) or that I'm not using the right port numbers or something else I didn't do. I used TcpView to look at local port associated with my Cepstral software and changed a few things but still nothing. I changed the loglevel setting to 7 in the wiki's example but I don't see the kind of output on the console that I would expect for debug mode.
Thanks. Mark.
_______________________________________________ Freeswitch-users mailing list Freeswitch-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- David Knell, Director, 3C Limited T: 020 8114 8901 F: 020 3002 7257 M: 001 415 630 3031 http://www.3c.co.uk
_______________________________________________ Freeswitch-users mailing list Freeswitch-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- Anthony Minessale II
FreeSWITCH http://www.freeswitch.org/ ClueCon http://www.cluecon.com/
AIM: anthm MSN:anthony_minessale@hotmail.com GTALK/JABBER/PAYPAL:anthony.minessale@gmail.com IRC: irc.freenode.net #freeswitch
FreeSWITCH Developer Conference sip:888@conference.freeswitch.org iax:guest@conference.freeswitch.org/888 googletalk:conf+888@conference.freeswitch.org pstn:213-799-1400 _______________________________________________ Freeswitch-users mailing list Freeswitch-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- David Knell, Director, 3C Limited T: 020 8114 8901 F: 020 3002 7257 M: 001 415 630 3031 http://www.3c.co.uk
_______________________________________________ Freeswitch-users mailing list Freeswitch-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- Anthony Minessale II
FreeSWITCH http://www.freeswitch.org/ ClueCon http://www.cluecon.com/
AIM: anthm MSN:anthony_minessale@hotmail.com GTALK/JABBER/PAYPAL:anthony.minessale@gmail.com IRC: irc.freenode.net #freeswitch
FreeSWITCH Developer Conference sip:888@conference.freeswitch.org iax:guest@conference.freeswitch.org/888 googletalk:conf+888@conference.freeswitch.org pstn:213-799-1400 _______________________________________________ Freeswitch-users mailing list Freeswitch-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
from build root: svn co -r8809 http://svn.freeswitch.org/svn/freeswitch/trunk/src/mod/asr_tts/mod_lumenvoxs... They did seem to express an interest in granting some dev licenses when they realized we took the code out of tree but I have not actually dealt with the issue yet because I have been overwhelmed. I don't know if this code works anymore with the latest revision of the api but there it is. On Tue, Dec 2, 2008 at 10:24 AM, Andrew Gilbert <gilbertandrew@me.com>wrote:
Mark and David,
I am willing to help some with testing here as well, if you need it. Ping me directly or we can get on the IRC. I am on Mac OS, but have readily available vm's with Debian, etc. I also have Prophecy.
I have a general interest in an ASR solution as well. Voxeo is great, but using it as an MRCP proxy seems odd. As a full fledged VXML solution it is great, if you can afford it. But having a good ASR solution is good first step to trying to get something like OpenVXI working as well.
That said, seems like a bounty or money to help FS is a better spend anyway. It is a one time cost, not a variable cost. And it goes straight to the guys doing the real work.
I built unimrcp last night, it was quite straight forward. In theory, if I weren't old and my C/autoconf skills rather atrophied, it wouldn't seem like it would be that huge a deal to port/fix openmrcp to unimrcp.
Finally, Anthony I was looking at the Lumenvox path as well, but got deterred by the licensing hassle. This seems to be a universal ASR issue. I would reason I can find the old module in SVN? Were they going to grant "community dev" licenses? Again - I am willing to volunteer to do some testing/doc at least.
Andy
On Dec 2, 2008, at 10:51 AM, Anthony Minessale wrote:
If you can get it to break on linux I will ssh in and fix it for you. If you cannot, i can try to fix it for you over rdp but that won't be very fun.
We can think about reinstating mod_lumenvox as well as another windows based asr alternative. I deleted it for the same reason we will probably delete mod_openmrcp because nobody was using it and there was no way to support it because our dev licenses had expired.
Lumenvox has offered us some new dev licenses to bring it back but I would need someone to actually want it to work to put in charge of it.
We will be clear about what is supported and what is not in the 1.0.2 release scheduled to be released in the near future.
On Tue, Dec 2, 2008 at 12:11 AM, David Knell <dave@3c.co.uk> wrote:
Hi Anthony,
mod_openmrcp was a contribution to the community by a 3rd party individual.
As i have clearly stated in 2 previous emails, the man has decided to discontinue the openmrcp project. So now we are left with the remains of the module and discontinued code. This was not our decision it was his.
I absolutely understand this but it's important, from a user point of view, to be able to know which bits of FS are current/supported and which aren't.
Some people use it without issue which may mean that the crash you reported is windows specific and I do not have a working lab of any mrcp capbable system to try it against in unix for that matter. I have a list of work to do from here to the moon and back so on an issue like this, unless someone can hand me login credentials to some box and give me a phone number to dial to reporduce the issue, it will be a long time until we can deal with it.
It's useful to know that there are people using mod_openmrcp without issue: I did ask here if anyone was a while back, and no-one fessed up. I'll give it a go on a Linux box and report back. And if you'd like a dev/test environment set up, then just tell me which one.
And the question arises, should we bother working on it anymore if the lib has been abandoned and we cannot even get any support from it's author which is where the problem most likely lies.
I try not to get too annoyed by these remarks about what we *ought to do* because I know people lose sight of how much of the work to support the project is done by a small group of 3 people and not the 2000 people it appears to be from the outside looking in. (I've been answering email for 4 hours now)
Those guys who claim to have all that money in an offshore bank account are lying - you don't have to reply to them in future ;-) Seriously, though, I don't think it's too outrageous an idea to document what's supported and were you (for example) to have suggested that I get in touch with the contributors to the various modules, ask them what their view of its status is, condense the answers in to a list and report back, it's something I'd quite happily do.
My suggestion is to pool some cash and pay the guy to make mod_unimrcp for FS that we can maintain in tree knowing the development can be supported by the original author.
Quite happy to participate in that, too.. the problem is that I've a demo to do like yesterday and the timescale for mod_unimrcp is a bit on the long side for that. I'd rather not have to do it with Asterisk and Lumenvox..!
Cheers --
Dave
On Mon, Dec 1, 2008 at 12:51 PM, David Knell <dave@3c.co.uk> wrote:
Hi Mike,
My experience is that it's somewhat broken - it took two trivial tweaks to get it to work with IBM's ASR and TTS, but there's a more intractable problem to do with memory getting overwritten (I assume that this is something to do with something being freed when it shouldn't be) which causes a segfault on the second or third session after the module being loaded.
Without wishing to sound like a stuck record, one thing that you guys really ought to do is to decide what's supported and what isn't, and make this obvious - for example, move unsupported modules to a different place in the tree, don't have them built by default, etc. MRCP is in the specsheet on the Wiki. Otherwise folk like Mark and I spend time installing stuff, go round in circles a bit trying to make it work, and then find out (a) that it doesn't and (b) it's not going to be fixed because it's not supported.
Cheers --
Dave
I would not say it is totally broken, it is known to work in quite a few places, but we are unlikely to be doing any new fixes in it. Mike
On Dec 1, 2008, at 1:19 PM, mszlazak@aol.com wrote:
Hi Anthony,
Oh! OK.
So is this module "totally broken".
I say this because I can't seem to get it to work at all with the example in that Mod_openmrcp wiki page but I thought it might because I'm not be using the right Cepstral software (freetrial download versus the paided for SDK) or that I'm not using the right port numbers or something else I didn't do. I used TcpView to look at local port associated with my Cepstral software and changed a few things but still nothing. I changed the loglevel setting to 7 in the wiki's example but I don't see the kind of output on the console that I would expect for debug mode.
Thanks. Mark.
------------------------------ _______________________________________________ Freeswitch-users mailing listFreeswitch-users@lists.freeswitch.orghttp://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-usershttp://www.frees...
-- David Knell, Director, 3C Limited T: 020 8114 8901 F: 020 3002 7257 M: 001 415 630 3031http://www.3c.co.uk
_______________________________________________ Freeswitch-users mailing list Freeswitch-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- Anthony Minessale II
FreeSWITCH http://www.freeswitch.org/ ClueCon http://www.cluecon.com/
AIM: anthm MSN:anthony_minessale@hotmail.com <MSN%3Aanthony_minessale@hotmail.com> GTALK/JABBER/PAYPAL:anthony.minessale@gmail.com<PAYPAL%3Aanthony.minessale@gmail.com> IRC: irc.freenode.net #freeswitch
FreeSWITCH Developer Conference sip:888@conference.freeswitch.org <sip%3A888@conference.freeswitch.org> iax:guest@conference.freeswitch.org/888 googletalk:conf+888@conference.freeswitch.org<googletalk%3Aconf%2B888@conference.freeswitch.org> pstn:213-799-1400
------------------------------ _______________________________________________ Freeswitch-users mailing listFreeswitch-users@lists.freeswitch.orghttp://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-usershttp://www.frees...
-- David Knell, Director, 3C Limited T: 020 8114 8901 F: 020 3002 7257 M: 001 415 630 3031http://www.3c.co.uk
_______________________________________________ Freeswitch-users mailing list Freeswitch-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- Anthony Minessale II
FreeSWITCH http://www.freeswitch.org/ ClueCon http://www.cluecon.com/
AIM: anthm MSN:anthony_minessale@hotmail.com <MSN%3Aanthony_minessale@hotmail.com> GTALK/JABBER/PAYPAL:anthony.minessale@gmail.com<PAYPAL%3Aanthony.minessale@gmail.com> IRC: irc.freenode.net #freeswitch
FreeSWITCH Developer Conference sip:888@conference.freeswitch.org <sip%3A888@conference.freeswitch.org> iax:guest@conference.freeswitch.org/888 googletalk:conf+888@conference.freeswitch.org<googletalk%3Aconf%2B888@conference.freeswitch.org> pstn:213-799-1400 _______________________________________________ Freeswitch-users mailing list Freeswitch-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ Freeswitch-users mailing list Freeswitch-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- Anthony Minessale II FreeSWITCH http://www.freeswitch.org/ ClueCon http://www.cluecon.com/ AIM: anthm MSN:anthony_minessale@hotmail.com <MSN%3Aanthony_minessale@hotmail.com> GTALK/JABBER/PAYPAL:anthony.minessale@gmail.com<PAYPAL%3Aanthony.minessale@gmail.com> IRC: irc.freenode.net #freeswitch FreeSWITCH Developer Conference sip:888@conference.freeswitch.org <sip%3A888@conference.freeswitch.org> iax:guest@conference.freeswitch.org/888 googletalk:conf+888@conference.freeswitch.org<googletalk%3Aconf%2B888@conference.freeswitch.org> pstn:213-799-1400
Ok I have a ping in with Lumenvox about dev licensing, and pulled the mod. Not sure where this will go, but will take a peek at things. Balancing the effort against something like getting unimcrp going and/ or openmrcp tested and stable. Thanks. Andy On Dec 2, 2008, at 11:43 AM, Anthony Minessale wrote:
from build root:
svn co -r8809 http://svn.freeswitch.org/svn/freeswitch/trunk/src/mod/asr_tts/mod_lumenvox src/mod/asr_tts/mod_lumenvox
They did seem to express an interest in granting some dev licenses when they realized we took the code out of tree but I have not actually dealt with the issue yet because I have been overwhelmed.
I don't know if this code works anymore with the latest revision of the api but there it is.
On Tue, Dec 2, 2008 at 10:24 AM, Andrew Gilbert <gilbertandrew@me.com> wrote: Mark and David,
I am willing to help some with testing here as well, if you need it. Ping me directly or we can get on the IRC. I am on Mac OS, but have readily available vm's with Debian, etc. I also have Prophecy.
I have a general interest in an ASR solution as well. Voxeo is great, but using it as an MRCP proxy seems odd. As a full fledged VXML solution it is great, if you can afford it. But having a good ASR solution is good first step to trying to get something like OpenVXI working as well.
That said, seems like a bounty or money to help FS is a better spend anyway. It is a one time cost, not a variable cost. And it goes straight to the guys doing the real work.
I built unimrcp last night, it was quite straight forward. In theory, if I weren't old and my C/autoconf skills rather atrophied, it wouldn't seem like it would be that huge a deal to port/fix openmrcp to unimrcp.
Finally, Anthony I was looking at the Lumenvox path as well, but got deterred by the licensing hassle. This seems to be a universal ASR issue. I would reason I can find the old module in SVN? Were they going to grant "community dev" licenses? Again - I am willing to volunteer to do some testing/doc at least.
Andy
On Dec 2, 2008, at 10:51 AM, Anthony Minessale wrote:
If you can get it to break on linux I will ssh in and fix it for you. If you cannot, i can try to fix it for you over rdp but that won't be very fun.
We can think about reinstating mod_lumenvox as well as another windows based asr alternative. I deleted it for the same reason we will probably delete mod_openmrcp because nobody was using it and there was no way to support it because our dev licenses had expired.
Lumenvox has offered us some new dev licenses to bring it back but I would need someone to actually want it to work to put in charge of it.
We will be clear about what is supported and what is not in the 1.0.2 release scheduled to be released in the near future.
On Tue, Dec 2, 2008 at 12:11 AM, David Knell <dave@3c.co.uk> wrote: Hi Anthony,
mod_openmrcp was a contribution to the community by a 3rd party individual.
As i have clearly stated in 2 previous emails, the man has decided to discontinue the openmrcp project. So now we are left with the remains of the module and discontinued code. This was not our decision it was his. I absolutely understand this but it's important, from a user point of view, to be able to know which bits of FS are current/supported and which aren't.
Some people use it without issue which may mean that the crash you reported is windows specific and I do not have a working lab of any mrcp capbable system to try it against in unix for that matter. I have a list of work to do from here to the moon and back so on an issue like this, unless someone can hand me login credentials to some box and give me a phone number to dial to reporduce the issue, it will be a long time until we can deal with it. It's useful to know that there are people using mod_openmrcp without issue: I did ask here if anyone was a while back, and no- one fessed up. I'll give it a go on a Linux box and report back. And if you'd like a dev/test environment set up, then just tell me which one.
And the question arises, should we bother working on it anymore if the lib has been abandoned and we cannot even get any support from it's author which is where the problem most likely lies.
I try not to get too annoyed by these remarks about what we *ought to do* because I know people lose sight of how much of the work to support the project is done by a small group of 3 people and not the 2000 people it appears to be from the outside looking in. (I've been answering email for 4 hours now) Those guys who claim to have all that money in an offshore bank account are lying - you don't have to reply to them in future ;-) Seriously, though, I don't think it's too outrageous an idea to document what's supported and were you (for example) to have suggested that I get in touch with the contributors to the various modules, ask them what their view of its status is, condense the answers in to a list and report back, it's something I'd quite happily do.
My suggestion is to pool some cash and pay the guy to make mod_unimrcp for FS that we can maintain in tree knowing the development can be supported by the original author. Quite happy to participate in that, too.. the problem is that I've a demo to do like yesterday and the timescale for mod_unimrcp is a bit on the long side for that. I'd rather not have to do it with Asterisk and Lumenvox..!
Cheers --
Dave
On Mon, Dec 1, 2008 at 12:51 PM, David Knell <dave@3c.co.uk> wrote: Hi Mike,
My experience is that it's somewhat broken - it took two trivial tweaks to get it to work with IBM's ASR and TTS, but there's a more intractable problem to do with memory getting overwritten (I assume that this is something to do with something being freed when it shouldn't be) which causes a segfault on the second or third session after the module being loaded.
Without wishing to sound like a stuck record, one thing that you guys really ought to do is to decide what's supported and what isn't, and make this obvious - for example, move unsupported modules to a different place in the tree, don't have them built by default, etc. MRCP is in the specsheet on the Wiki. Otherwise folk like Mark and I spend time installing stuff, go round in circles a bit trying to make it work, and then find out (a) that it doesn't and (b) it's not going to be fixed because it's not supported.
Cheers --
Dave
I would not say it is totally broken, it is known to work in quite a few places, but we are unlikely to be doing any new fixes in it.
Mike
On Dec 1, 2008, at 1:19 PM, mszlazak@aol.com wrote:
Hi Anthony,
Oh! OK.
So is this module "totally broken".
I say this because I can't seem to get it to work at all with the example in that Mod_openmrcp wiki page but I thought it might because I'm not be using the right Cepstral software (freetrial download versus the paided for SDK) or that I'm not using the right port numbers or something else I didn't do. I used TcpView to look at local port associated with my Cepstral software and changed a few things but still nothing. I changed the loglevel setting to 7 in the wiki's example but I don't see the kind of output on the console that I would expect for debug mode.
Thanks. Mark.
_______________________________________________ Freeswitch-users mailing list Freeswitch-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- David Knell, Director, 3C Limited T: 020 8114 8901 F: 020 3002 7257 M: 001 415 630 3031 http://www.3c.co.uk
_______________________________________________ Freeswitch-users mailing list Freeswitch-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- Anthony Minessale II
FreeSWITCH http://www.freeswitch.org/ ClueCon http://www.cluecon.com/
AIM: anthm MSN:anthony_minessale@hotmail.com GTALK/JABBER/PAYPAL:anthony.minessale@gmail.com IRC: irc.freenode.net #freeswitch
FreeSWITCH Developer Conference sip:888@conference.freeswitch.org iax:guest@conference.freeswitch.org/888 googletalk:conf+888@conference.freeswitch.org pstn:213-799-1400 _______________________________________________ Freeswitch-users mailing list Freeswitch-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- David Knell, Director, 3C Limited T: 020 8114 8901 F: 020 3002 7257 M: 001 415 630 3031 http://www.3c.co.uk
_______________________________________________ Freeswitch-users mailing list Freeswitch-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- Anthony Minessale II
FreeSWITCH http://www.freeswitch.org/ ClueCon http://www.cluecon.com/
AIM: anthm MSN:anthony_minessale@hotmail.com GTALK/JABBER/PAYPAL:anthony.minessale@gmail.com IRC: irc.freenode.net #freeswitch
FreeSWITCH Developer Conference sip:888@conference.freeswitch.org iax:guest@conference.freeswitch.org/888 googletalk:conf+888@conference.freeswitch.org pstn:213-799-1400 _______________________________________________ Freeswitch-users mailing list Freeswitch-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ Freeswitch-users mailing list Freeswitch-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- Anthony Minessale II
FreeSWITCH http://www.freeswitch.org/ ClueCon http://www.cluecon.com/
AIM: anthm MSN:anthony_minessale@hotmail.com GTALK/JABBER/PAYPAL:anthony.minessale@gmail.com IRC: irc.freenode.net #freeswitch
FreeSWITCH Developer Conference sip:888@conference.freeswitch.org iax:guest@conference.freeswitch.org/888 googletalk:conf+888@conference.freeswitch.org pstn:213-799-1400 _______________________________________________ Freeswitch-users mailing list Freeswitch-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
They contacted us shortly thereafter and asked if we want to have them sell you the license for 50 bucks. hmm, i wonder why i deleted the module..... I will tell them that if they give you a developer license you will work on getting it back into trunk. On Tue, Dec 2, 2008 at 11:27 AM, Andrew Gilbert <gilbertandrew@me.com>wrote:
Ok
I have a ping in with Lumenvox about dev licensing, and pulled the mod. Not sure where this will go, but will take a peek at things. Balancing the effort against something like getting unimcrp going and/or openmrcp tested and stable.
Thanks.
Andy
On Dec 2, 2008, at 11:43 AM, Anthony Minessale wrote:
from build root:
svn co -r8809 http://svn.freeswitch.org/svn/freeswitch/trunk/src/mod/asr_tts/mod_lumenvoxs...
They did seem to express an interest in granting some dev licenses when they realized we took the code out of tree but I have not actually dealt with the issue yet because I have been overwhelmed.
I don't know if this code works anymore with the latest revision of the api but there it is.
On Tue, Dec 2, 2008 at 10:24 AM, Andrew Gilbert <gilbertandrew@me.com>wrote:
Mark and David,
I am willing to help some with testing here as well, if you need it. Ping me directly or we can get on the IRC. I am on Mac OS, but have readily available vm's with Debian, etc. I also have Prophecy.
I have a general interest in an ASR solution as well. Voxeo is great, but using it as an MRCP proxy seems odd. As a full fledged VXML solution it is great, if you can afford it. But having a good ASR solution is good first step to trying to get something like OpenVXI working as well.
That said, seems like a bounty or money to help FS is a better spend anyway. It is a one time cost, not a variable cost. And it goes straight to the guys doing the real work.
I built unimrcp last night, it was quite straight forward. In theory, if I weren't old and my C/autoconf skills rather atrophied, it wouldn't seem like it would be that huge a deal to port/fix openmrcp to unimrcp.
Finally, Anthony I was looking at the Lumenvox path as well, but got deterred by the licensing hassle. This seems to be a universal ASR issue. I would reason I can find the old module in SVN? Were they going to grant "community dev" licenses? Again - I am willing to volunteer to do some testing/doc at least.
Andy
On Dec 2, 2008, at 10:51 AM, Anthony Minessale wrote:
If you can get it to break on linux I will ssh in and fix it for you. If you cannot, i can try to fix it for you over rdp but that won't be very fun.
We can think about reinstating mod_lumenvox as well as another windows based asr alternative. I deleted it for the same reason we will probably delete mod_openmrcp because nobody was using it and there was no way to support it because our dev licenses had expired.
Lumenvox has offered us some new dev licenses to bring it back but I would need someone to actually want it to work to put in charge of it.
We will be clear about what is supported and what is not in the 1.0.2 release scheduled to be released in the near future.
On Tue, Dec 2, 2008 at 12:11 AM, David Knell <dave@3c.co.uk> wrote:
Hi Anthony,
mod_openmrcp was a contribution to the community by a 3rd party individual.
As i have clearly stated in 2 previous emails, the man has decided to discontinue the openmrcp project. So now we are left with the remains of the module and discontinued code. This was not our decision it was his.
I absolutely understand this but it's important, from a user point of view, to be able to know which bits of FS are current/supported and which aren't.
Some people use it without issue which may mean that the crash you reported is windows specific and I do not have a working lab of any mrcp capbable system to try it against in unix for that matter. I have a list of work to do from here to the moon and back so on an issue like this, unless someone can hand me login credentials to some box and give me a phone number to dial to reporduce the issue, it will be a long time until we can deal with it.
It's useful to know that there are people using mod_openmrcp without issue: I did ask here if anyone was a while back, and no-one fessed up. I'll give it a go on a Linux box and report back. And if you'd like a dev/test environment set up, then just tell me which one.
And the question arises, should we bother working on it anymore if the lib has been abandoned and we cannot even get any support from it's author which is where the problem most likely lies.
I try not to get too annoyed by these remarks about what we *ought to do* because I know people lose sight of how much of the work to support the project is done by a small group of 3 people and not the 2000 people it appears to be from the outside looking in. (I've been answering email for 4 hours now)
Those guys who claim to have all that money in an offshore bank account are lying - you don't have to reply to them in future ;-) Seriously, though, I don't think it's too outrageous an idea to document what's supported and were you (for example) to have suggested that I get in touch with the contributors to the various modules, ask them what their view of its status is, condense the answers in to a list and report back, it's something I'd quite happily do.
My suggestion is to pool some cash and pay the guy to make mod_unimrcp for FS that we can maintain in tree knowing the development can be supported by the original author.
Quite happy to participate in that, too.. the problem is that I've a demo to do like yesterday and the timescale for mod_unimrcp is a bit on the long side for that. I'd rather not have to do it with Asterisk and Lumenvox..!
Cheers --
Dave
On Mon, Dec 1, 2008 at 12:51 PM, David Knell <dave@3c.co.uk> wrote:
Hi Mike,
My experience is that it's somewhat broken - it took two trivial tweaks to get it to work with IBM's ASR and TTS, but there's a more intractable problem to do with memory getting overwritten (I assume that this is something to do with something being freed when it shouldn't be) which causes a segfault on the second or third session after the module being loaded.
Without wishing to sound like a stuck record, one thing that you guys really ought to do is to decide what's supported and what isn't, and make this obvious - for example, move unsupported modules to a different place in the tree, don't have them built by default, etc. MRCP is in the specsheet on the Wiki. Otherwise folk like Mark and I spend time installing stuff, go round in circles a bit trying to make it work, and then find out (a) that it doesn't and (b) it's not going to be fixed because it's not supported.
Cheers --
Dave
I would not say it is totally broken, it is known to work in quite a few places, but we are unlikely to be doing any new fixes in it. Mike
On Dec 1, 2008, at 1:19 PM, mszlazak@aol.com wrote:
Hi Anthony,
Oh! OK.
So is this module "totally broken".
I say this because I can't seem to get it to work at all with the example in that Mod_openmrcp wiki page but I thought it might because I'm not be using the right Cepstral software (freetrial download versus the paided for SDK) or that I'm not using the right port numbers or something else I didn't do. I used TcpView to look at local port associated with my Cepstral software and changed a few things but still nothing. I changed the loglevel setting to 7 in the wiki's example but I don't see the kind of output on the console that I would expect for debug mode.
Thanks. Mark.
------------------------------ _______________________________________________ Freeswitch-users mailing listFreeswitch-users@lists.freeswitch.orghttp://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-usershttp://www.frees...
-- David Knell, Director, 3C Limited T: 020 8114 8901 F: 020 3002 7257 M: 001 415 630 3031http://www.3c.co.uk
_______________________________________________ Freeswitch-users mailing list Freeswitch-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE: http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- Anthony Minessale II
FreeSWITCH http://www.freeswitch.org/ ClueCon http://www.cluecon.com/
AIM: anthm MSN:anthony_minessale@hotmail.com <MSN%3Aanthony_minessale@hotmail.com> GTALK/JABBER/PAYPAL:anthony.minessale@gmail.com<PAYPAL%3Aanthony.minessale@gmail.com> IRC: irc.freenode.net #freeswitch
FreeSWITCH Developer Conference sip:888@conference.freeswitch.org <sip%3A888@conference.freeswitch.org> iax:guest@conference.freeswitch.org/888 googletalk:conf+888@conference.freeswitch.org<googletalk%3Aconf%2B888@conference.freeswitch.org> pstn:213-799-1400
------------------------------ _______________________________________________ Freeswitch-users mailing listFreeswitch-users@lists.freeswitch.orghttp://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-usershttp://www.frees...
-- David Knell, Director, 3C Limited T: 020 8114 8901 F: 020 3002 7257 M: 001 415 630 3031http://www.3c.co.uk
_______________________________________________ Freeswitch-users mailing list Freeswitch-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- Anthony Minessale II
FreeSWITCH http://www.freeswitch.org/ ClueCon http://www.cluecon.com/
AIM: anthm MSN:anthony_minessale@hotmail.com <MSN%3Aanthony_minessale@hotmail.com> GTALK/JABBER/PAYPAL:anthony.minessale@gmail.com<PAYPAL%3Aanthony.minessale@gmail.com> IRC: irc.freenode.net #freeswitch
FreeSWITCH Developer Conference sip:888@conference.freeswitch.org <sip%3A888@conference.freeswitch.org> iax:guest@conference.freeswitch.org/888 googletalk:conf+888@conference.freeswitch.org<googletalk%3Aconf%2B888@conference.freeswitch.org> pstn:213-799-1400 _______________________________________________ Freeswitch-users mailing list Freeswitch-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ Freeswitch-users mailing list Freeswitch-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- Anthony Minessale II
FreeSWITCH http://www.freeswitch.org/ ClueCon http://www.cluecon.com/
AIM: anthm MSN:anthony_minessale@hotmail.com <MSN%3Aanthony_minessale@hotmail.com> GTALK/JABBER/PAYPAL:anthony.minessale@gmail.com<PAYPAL%3Aanthony.minessale@gmail.com> IRC: irc.freenode.net #freeswitch
FreeSWITCH Developer Conference sip:888@conference.freeswitch.org <sip%3A888@conference.freeswitch.org> iax:guest@conference.freeswitch.org/888 googletalk:conf+888@conference.freeswitch.org<googletalk%3Aconf%2B888@conference.freeswitch.org> pstn:213-799-1400 _______________________________________________ Freeswitch-users mailing list Freeswitch-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ Freeswitch-users mailing list Freeswitch-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- Anthony Minessale II FreeSWITCH http://www.freeswitch.org/ ClueCon http://www.cluecon.com/ AIM: anthm MSN:anthony_minessale@hotmail.com <MSN%3Aanthony_minessale@hotmail.com> GTALK/JABBER/PAYPAL:anthony.minessale@gmail.com<PAYPAL%3Aanthony.minessale@gmail.com> IRC: irc.freenode.net #freeswitch FreeSWITCH Developer Conference sip:888@conference.freeswitch.org <sip%3A888@conference.freeswitch.org> iax:guest@conference.freeswitch.org/888 googletalk:conf+888@conference.freeswitch.org<googletalk%3Aconf%2B888@conference.freeswitch.org> pstn:213-799-1400
participants (6)
-
Andrew Gilbert
-
Anthony Minessale
-
David Knell
-
Michael Collins
-
Michael Jerris
-
mszlazak＠aol.com