Hi, I need some help with an idea I am trying to implement with Freeswitch. I am trying to work with a partner company which will forward a sip call to my freeswitch server and my freeswitch server is suppose to playback annoucements to the caller and then once they are finished listening they should be forwarded back to the partner company so that the call can continue without my freeswitch being in the call path. So does any one have any suggestions/ideas on the best way to implement this?
I could only think of these two. I was almost trying the same thing on my setup some time ago. 1- Use redirect application at the end of your prompts back to the same server. So A-party and C-party being the same server should bridge the same call back to one. 2- Use hangup application with some custom header as flag and tell your partner company to proceed on the basis of that flag. hope anybody else comes up with some brilliantly simple idea. Regards, -Sammy On Fri, Sep 30, 2011 at 9:26 AM, Sam <lakersman2006@yahoo.com> wrote:
Hi,
I need some help with an idea I am trying to implement with Freeswitch. I am trying to work with a partner company which will forward a sip call to my freeswitch server and my freeswitch server is suppose to playback annoucements to the caller and then once they are finished listening they should be forwarded back to the partner company so that the call can continue without my freeswitch being in the call path. So does any one have any suggestions/ideas on the best way to implement this?
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
Thanks for the two ideas, I have a question will method #1 work if A-party and C-party are on seperate servers? Also for method #2, is it possible to use the hangup application to send a custom sip header? How exactly would that work? ________________________________ From: Sam Govind <govoiper@gmail.com> To: FreeSWITCH Users Help <freeswitch-users@lists.freeswitch.org> Sent: Thursday, September 29, 2011 10:15 PM Subject: Re: [Freeswitch-users] Need help I could only think of these two. I was almost trying the same thing on my setup some time ago. 1- Use redirect application at the end of your prompts back to the same server. So A-party and C-party being the same server should bridge the same call back to one. 2- Use hangup application with some custom header as flag and tell your partner company to proceed on the basis of that flag. hope anybody else comes up with some brilliantly simple idea. Regards, -Sammy On Fri, Sep 30, 2011 at 9:26 AM, Sam <lakersman2006@yahoo.com> wrote: Hi,
I need some help with an idea I am trying to implement with Freeswitch. I am trying to work with a partner company which will forward a sip call to my freeswitch server and my freeswitch server is suppose to playback annoucements to the caller and then once they are finished listening they should be forwarded back to the partner company so that the call can continue without my freeswitch being in the call path. So does any one have any suggestions/ideas on the best way to implement this?
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
Most of the stuff you're trying to implement are on the FreeSWITCH Wiki. If you are looking for professional consulting there's consulting@FreeSWITCH.org On 2011-09-30 9:40 AM, "Sam" <lakersman2006@yahoo.com> wrote:
Thanks for the two ideas, I have a question will method #1 work if A-party
and C-party are on seperate servers?
Also for method #2, is it possible to use the hangup application to send a
custom sip header? How exactly would that work?
________________________________ From: Sam Govind <govoiper@gmail.com> To: FreeSWITCH Users Help <freeswitch-users@lists.freeswitch.org> Sent: Thursday, September 29, 2011 10:15 PM Subject: Re: [Freeswitch-users] Need help
I could only think of these two. I was almost trying the same thing on my
setup some time ago.
1- Use redirect application at the end of your prompts back to the same
server. So A-party and C-party being the same server should bridge the same call back to one.
2- Use hangup application with some custom header as flag and tell your partner company to proceed on the basis of that flag.
hope anybody else comes up with some brilliantly simple idea.
Regards, -Sammy
On Fri, Sep 30, 2011 at 9:26 AM, Sam <lakersman2006@yahoo.com> wrote:
Hi,
I need some help with an idea I am trying to implement with Freeswitch. I
am trying to work with a partner company which will forward a sip call to my freeswitch server and my freeswitch server is suppose to playback annoucements to the caller and then once they are finished listening they should be forwarded back to the partner company so that the call can continue without my freeswitch being in the call path. So does any one have any suggestions/ideas on the best way to implement this?
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
That's about as simple as you can get. Have your choice of web script generate this little piece of dial plan based on the content of your database and you have a really easy to maintain system. Sam Govind wrote:
I could only think of these two. I was almost trying the same thing on my setup some time ago.
1- Use redirect application at the end of your prompts back to the same server. So A-party and C-party being the same server should bridge the same call back to one. 2- Use hangup application with some custom header as flag and tell your partner company to proceed on the basis of that flag.
hope anybody else comes up with some brilliantly simple idea.
Regards, -Sammy
On Fri, Sep 30, 2011 at 9:26 AM, Sam <lakersman2006@yahoo.com <mailto:lakersman2006@yahoo.com>> wrote:
Hi,
I need some help with an idea I am trying to implement with Freeswitch. I am trying to work with a partner company which will forward a sip call to my freeswitch server and my freeswitch server is suppose to playback annoucements to the caller and then once they are finished listening they should be forwarded back to the partner company so that the call can continue without my freeswitch being in the call path. So does any one have any suggestions/ideas on the best way to implement this?
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org <mailto:FreeSWITCH-users@lists.freeswitch.org> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
------------------------------------------------------------------------
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
participants (4)
-
curriegrad2004
-
Sam
-
Sam Govind
-
Tim St. Pierre