NAT Traversal on SFLphone - FS not Auto Changing port
http://pastebin.freeswitch.org/16627 I've got a Linksys ATA behind NAT and a softphone behind NAT. Both seem to register with the same UDP-NAT string and both have the same type of contact string.. but on one FS is rewriting the RTP IP to work properly - the 1102 works, but on 1000 I don't seem to be getting any audio. Is there some hidden parameter I can't see affecting this? Both are dialing the same extension 9664 default MOH stuff... This softphone actually seems to have a responsive gui in linux. If I can get the audio to actually work, that would great! (Oh, it has tls/srtp too, it seems) Thanks! <http://pastebin.freeswitch.org/16627> -Avi Marcus
you might want to include the sip-trace and the whole call setup . Your log shows its getting audio from the phone and autodetects the correct rtp port. Do you have both on at once? maybe one already owns your soundcard so it breaks the other, try turning them both off and only start the one. while the call is up, get a pcap on both sides and see if audio is going to the right place. On Thu, Jun 30, 2011 at 1:23 AM, Avi Marcus <avi@avimarcus.net> wrote:
http://pastebin.freeswitch.org/16627 I've got a Linksys ATA behind NAT and a softphone behind NAT. Both seem to register with the same UDP-NAT string and both have the same type of contact string.. but on one FS is rewriting the RTP IP to work properly - the 1102 works, but on 1000 I don't seem to be getting any audio.
Is there some hidden parameter I can't see affecting this? Both are dialing the same extension 9664 default MOH stuff... This softphone actually seems to have a responsive gui in linux. If I can get the audio to actually work, that would great! (Oh, it has tls/srtp too, it seems)
Thanks! <http://pastebin.freeswitch.org/16627> -Avi Marcus
_______________________________________________ Join us at ClueCon 2011, Aug 9-11, Chicago http://www.cluecon.com 877-7-4ACLUE
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- Anthony Minessale II FreeSWITCH http://www.freeswitch.org/ ClueCon http://www.cluecon.com/ Twitter: http://twitter.com/FreeSWITCH_wire AIM: anthm MSN:anthony_minessale@hotmail.com GTALK/JABBER/PAYPAL:anthony.minessale@gmail.com IRC: irc.freenode.net #freeswitch FreeSWITCH Developer Conference sip:888@conference.freeswitch.org googletalk:conf+888@conference.freeswitch.org pstn:+19193869900
Hi All: I'm using Linphone as my VOIP client, i want 1 member to send instant messages to the conference and all other members in the conference should receive them. I can't figure out a way to do this, Linphone only allows to send messages to other members on the contact list, even if Linphone can do it, can freeswitch handle this?
participants (3)
-
Anthony Minessale
-
Avi Marcus
-
ran zhang