Re: [Freeswitch-users] Event socket and Python
Sami Montour wrote:
Sorry I misunderstood your post about testing with a closed port. Anyway, I ran your script (port 8041) but didn't get a connection to FS, different from what you received.
Hmm, that's interesting. I guess either I happened to check out a buggy version of FS, there's something strange with my configuration or there's some ARM-specific issue (I run FS on a Raspberry Pi). I'll have to do some more troubleshooting. Thank you for checking! - Johan
Johan Brannlund <freeswitch@...> writes:
Hmm, that's interesting. I guess either I happened to check out a buggy version of FS, there's something strange with my configuration or there's some ARM-specific issue (I run FS on a Raspberry Pi). I'll have to do some more troubleshooting.
Hello Johan, The same problem is happening in my installation. I am running FS on Olimex A20. Have You find some solution?
I'm sure other Raspberry Pi users would be grateful if you'd share the knowledge that you discover on the Confluence wiki: https://freeswitch.org/confluence/display/FREESWITCH/Raspberry+Pi I don't think the Raspberry Pi page has kept up with recent builds of FreeSWITCH so this could be invaluable to others trying to build it on a Pi and other small machines. Thanks. --- Bote FreeSWITCH Docs Janitor http://freeswitch.org/confluence
-----Original Message----- From: PeterS Sent: Thursday, 14 January, 2016 09:34 Subject: Re: [Freeswitch-users] Event socket and Python
Johan Brannlund <freeswitch@...> writes:
Hmm, that's interesting. I guess either I happened to check out a buggy version of FS, there's something strange with my configuration or there's some ARM-specific issue (I run FS on a Raspberry Pi). I'll have to do some more troubleshooting.
Hello Johan,
The same problem is happening in my installation. I am running FS on Olimex A20. Have You find some solution?
On behalf of other "Olimex with Allwinner A20 users": any information pertaining to our devices would be most welcome, too; with these caveats: which device are you using, specifically; e.g., A20-OLinuXino-LIME MICRO; A20-OLinuXIno-LIME-4GB; A20-OLinuXino-LIME2 ? While they're largely similar, the are some subtle differences between the boards in that family. And, perhaps even more importantly, which Linux build are you using? Most of the above boards have a version of Arch Linux pre-installed. However, the Olimex web site recommends using either Debian Jessie or Wheezy, and contains links to the most recent SD card versions of both. Or, are you using one of the "headless" kernels - there's a link from the Olimex site to an external site containing these images, including one with a Jessie and a 4.x kernel. Perhaps it's time to split up the FS docs by hardware architecture, then by vendor, then model? There are more, new boards capable of running FS hitting the market all the time; lately, every time I turn my head, I run across another one. I think this is likely to be the case for at least the foreseeable future, and I'd guess it was more likely than not that each potentially had it's own quirks. Just my $0.02. - Larry On Jan 17, 2016 11:03 AM, "Bote Man" <bote_radio@botecomm.com> wrote:
I'm sure other Raspberry Pi users would be grateful if you'd share the knowledge that you discover on the Confluence wiki: https://freeswitch.org/confluence/display/FREESWITCH/Raspberry+Pi
I don't think the Raspberry Pi page has kept up with recent builds of FreeSWITCH so this could be invaluable to others trying to build it on a Pi and other small machines.
Thanks.
--- Bote
FreeSWITCH Docs Janitor http://freeswitch.org/confluence
-----Original Message----- From: PeterS Sent: Thursday, 14 January, 2016 09:34 Subject: Re: [Freeswitch-users] Event socket and Python
Johan Brannlund <freeswitch@...> writes:
Hmm, that's interesting. I guess either I happened to check out a buggy version of FS, there's something strange with my configuration or there's some ARM-specific issue (I run FS on a Raspberry Pi). I'll have to do some more troubleshooting.
Hello Johan,
The same problem is happening in my installation. I am running FS on Olimex A20. Have You find some solution?
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
One of the best methods for finding relevant documentation and examples in Confluence lies in the tags (or labels) on each page. Unfortunately, in our rush to copy over as many pages as possible from the old wiki these tags have not been applied to many Confluence pages. We need to have a tagging party which should be a short and sweet way to get every page tagged for better results. Because there might be many common elements and approaches with other hardware this is a good way to label relevant pages, because one page with common elements might be tagged with RPi and A20, while another more specific page about Rpi contains only that tag. I really like this way of doing it to avoid silos of information. I’ve lost count of the times that I’ve read seemingly unrelated information while searching for a solution, but it suddenly became very relevant and helped me solve the problem. Tags/labels work toward this goal. Anyway, I wish I could be more help to the original question, but hope the knowledge gets saved to increase the utility of FreeSWITCH for others. Thanks. --- Bote FreeSWITCH Docs Janitor <http://freeswitch.org/confluence> http://freeswitch.org/confluence From: Larry Morley Sent: Sunday, 17 January, 2016 14:18 Subject: Re: [Freeswitch-users] Event socket and Python Perhaps it's time to split up the FS docs by hardware architecture, then by vendor, then model? There are more, new boards capable of running FS hitting the market all the time; lately, every time I turn my head, I run across another one. I think this is likely to be the case for at least the foreseeable future, and I'd guess it was more likely than not that each potentially had it's own quirks. Just my $0.02. - Larry On Jan 17, 2016 11:03 AM, "Bote Man" <bote_radio@botecomm.com> wrote: I'm sure other Raspberry Pi users would be grateful if you'd share the knowledge that you discover on the Confluence wiki: https://freeswitch.org/confluence/display/FREESWITCH/Raspberry+Pi I don't think the Raspberry Pi page has kept up with recent builds of FreeSWITCH so this could be invaluable to others trying to build it on a Pi and other small machines. Thanks. --- Bote FreeSWITCH Docs Janitor http://freeswitch.org/confluence
-----Original Message----- From: PeterS Sent: Thursday, 14 January, 2016 09:34 Subject: Re: [Freeswitch-users] Event socket and Python
Johan Brannlund <freeswitch@...> writes:
Hmm, that's interesting. I guess either I happened to check out a buggy version of FS, there's something strange with my configuration or there's some ARM-specific issue (I run FS on a Raspberry Pi). I'll have to do some more troubleshooting.
Hello Johan,
The same problem is happening in my installation. I am running FS on Olimex A20. Have You find some solution?
participants (4)
-
Bote Man
-
Johan Brannlund
-
Larry Morley
-
PeterS