Hi, I'm using FreeSwitch SpanDSP Modems in conjunction with Hylafax, and I'm noticing that occasionally Hylafax gets no CALLID information: Dec 02 08:13:22.45: [ 7439]: SESSION BEGIN 000000080 2292330412 Dec 02 08:13:22.45: [ 7439]: HylaFAX (tm) Version 5.5.5 Dec 02 08:13:22.45: [ 7439]: CallID: '' '' '' '' This doesn't happen consistently, but I've already seen it on around 3 faxes out of 40. Freeswitch prints out an appropriate callerId to my logs. This is what my Hylafax config file looks like: CountryCode: 1 AreaCode: 000 FAXNumber: +1.999.555.1212 LongDistancePrefix: 1 InternationalPrefix: 011 DialStringRules: etc/dialrules ServerTracing: 1 SessionTracing: 0xFFF RecvFileMode: 0660 LogFileMode: 0660 DeviceMode: 0660 RingsBeforeAnswer: 2 SpeakerVolume: off GettyArgs: "-h %l dx_%s" LocalIdentifier: "NothingSetup" TagLineFont: etc/LiberationSans-25.pcf TagLineFormat: "From %%l|%c|Page %%P of %%T" MaxRecvPages: 500 ModemType: Class1 # use this to supply a hint ModemResetCmds: AT+VCID=1 # enables CallID display PagerTTYParity: none Class1AdaptRecvCmd: AT+FAR=1 Class1TMConnectDelay: 400 # counteract quick CONNECT response CallIDPattern: "NMBR=" CallIDPattern: "NAME=" CallIDPattern: "ANID=" CallIDPattern: "NDID=" DynamicConfig: "/usr/local/bin/faxreceiveconfig" MaxBatchJobs: "1" BadPageHandlingMethod: DCN Any ideas? Thanks. (please CC me directly, I am viewing in digest mode) -- James