Dear All, I have installed Sangoma PRI card and installed wanpipe drivers. The wanrouter process started sucessfully. I had the following configurations, openzap.conf: ========== [span wanpipe PRI_1] name => OpenZAP number => 1 trunk_type => e1 b-channel => 1:1-15 d-channel => 1:16 b-channel => 1:17-31 [span wanpipe PRI_2] name => OpenZAP number => 2 trunk_type => e1 b-channel => 2:1-15 d-channel => 2:16 b-channel => 2:17-31 openzap.conf.xml: =========== <configuration name="openzap.conf" description="OpenZAP Configuration"> <settings> <param name="debug" value="1"/> </settings> <libpri_spans> <span name="PRI_1"> <param name="node" value="cpe"/> <param name="switch" value="ni2"/> <param name="dialplan" value="XML"/> <param name="context" value="public"/> </span> </libpri_spans> </configuration> When I started the freeswitch I have received the following error, 2010-01-19 12:41:22.693212 [ERR] mod_openzap.c:2039 Error finding OpenZAP span id: name:PRI_1 Any one please tell me a way to solve this problem... Thanks, Mag.