Thanks Brian, I don't think it's a SIP account as I don't need any user or password to use my softswitch, maybe I should use a SIP account if it were a class 5 softswitch. All the details I need is the IP address of the softswitch, I've tried to put it in <variable name="default_gateway" under /usr/local/freeswitch/conf/directory/default/default.xml then I call an E.164 from zoiper (1000 account registered to fs) but the call doesn't get routed. Consider that if I issue a command like originate sofia/default/+390243887353@mysoftswitch &bridge(sofia/default/+393477517958@mysoftswitch) something works :-) BRs, Claudio ________________________________ From: freeswitch-users-bounces@lists.freeswitch.org [mailto:freeswitch-users-bounces@lists.freeswitch.org] On Behalf Of Brian West Sent: Tuesday, May 27, 2008 4:05 PM To: freeswitch-users@lists.freeswitch.org Subject: Re: [Freeswitch-users] Sip trunk aka gateway configuration Configuring a sip account shouldn't be much different. You just need to fill in the details for the gateway. Just have to figure out what details you need to make it all work with your switch. On May 27, 2008, at 8:12 AM, Cavalera Claudio Luigi wrote: Hello, I have got a class 4 softswitch connected to public network via E1, ISUP etc... My softswitch already accepts SIP Invites arriving from IP address of my freeswitch installation (1.0 "phoenix"). I would like to configure a SIP trunk class 4 between freeswitch and my softswitch; I've tried following instructions http://wiki.freeswitch.org/wiki/Tested_Phone_Providers_Listing but I think these are not the same as they are not class 4. Could you please point me to the right instructions on the wiki? Thanks a lot, Claudio Brian West sip:brian@freeswitch.org Internet Email Confidentiality Footer ----------------------------------------------------------------------------------------------------- La presente comunicazione, con le informazioni in essa contenute e ogni documento o file allegato, e' rivolta unicamente alla/e persona/e cui e' indirizzata ed alle altre da questa autorizzata/e a riceverla. Se non siete i destinatari/autorizzati siete avvisati che qualsiasi azione, copia, comunicazione, divulgazione o simili basate sul contenuto di tali informazioni e' vietata e potrebbe essere contro la legge (art. 616 C.P., D.Lgs n. 196/2003 Codice in materia di protezione dei dati personali). Se avete ricevuto questa comunicazione per errore, vi preghiamo di darne immediata notizia al mittente e di distruggere il messaggio originale e ogni file allegato senza farne copia alcuna o riprodurne in alcun modo il contenuto. This e-mail and its attachments are intended for the addressee(s) only and are confidential and/or may contain legally privileged information. If you have received this message by mistake or are not one of the addressees above, you may take no action based on it, and you may not copy or show it to anyone; please reply to this e-mail and point out the error which has occurred. -----------------------------------------------------------------------------------------------------

freeswitch-users-bounces@lists.freeswitch.org wrote:

Well if your switch doesn't need authentication then you have zero need to setup a gateway in FreeSWITCH just sofia/profile/number@ip will work great.

Ok, but if I try to dial sofia/default/number@ip or just number@ip from zoiper registered to fs, calls are not routed. :-\ BRs, Claudio Internet Email Confidentiality Footer ----------------------------------------------------------------------------------------------------- La presente comunicazione, con le informazioni in essa contenute e ogni documento o file allegato, e' rivolta unicamente alla/e persona/e cui e' indirizzata ed alle altre da questa autorizzata/e a riceverla. Se non siete i destinatari/autorizzati siete avvisati che qualsiasi azione, copia, comunicazione, divulgazione o simili basate sul contenuto di tali informazioni e' vietata e potrebbe essere contro la legge (art. 616 C.P., D.Lgs n. 196/2003 Codice in materia di protezione dei dati personali). Se avete ricevuto questa comunicazione per errore, vi preghiamo di darne immediata notizia al mittente e di distruggere il messaggio originale e ogni file allegato senza farne copia alcuna o riprodurne in alcun modo il contenuto. This e-mail and its attachments are intended for the addressee(s) only and are confidential and/or may contain legally privileged information. If you have received this message by mistake or are not one of the addressees above, you may take no action based on it, and you may not copy or show it to anyone; please reply to this e-mail and point out the error which has occurred. -----------------------------------------------------------------------------------------------------

freeswitch-users-bounces@lists.freeswitch.org wrote:

Well if you're going to have phones register to FreeSWITCH you'll have to understand the configuration a bit more. I'm strictly speaking from FS not Zoiper... you'll have to build a dialplan to do this for you from zoiper.

I've done this in default xml and it works <extension name="claudio"> <condition field="destination_number" expression="333"> <action application="bridge" data="sofia/default/0248387353@softswitchIP"/> </condition> </extension> so I think SIP signalling between fs and my ssw is ok. Now I just have to create a dynamic binding of the dialed number in expression as a bridge application parameter. BRs, Claudio Internet Email Confidentiality Footer ----------------------------------------------------------------------------------------------------- La presente comunicazione, con le informazioni in essa contenute e ogni documento o file allegato, e' rivolta unicamente alla/e persona/e cui e' indirizzata ed alle altre da questa autorizzata/e a riceverla. Se non siete i destinatari/autorizzati siete avvisati che qualsiasi azione, copia, comunicazione, divulgazione o simili basate sul contenuto di tali informazioni e' vietata e potrebbe essere contro la legge (art. 616 C.P., D.Lgs n. 196/2003 Codice in materia di protezione dei dati personali). Se avete ricevuto questa comunicazione per errore, vi preghiamo di darne immediata notizia al mittente e di distruggere il messaggio originale e ogni file allegato senza farne copia alcuna o riprodurne in alcun modo il contenuto. This e-mail and its attachments are intended for the addressee(s) only and are confidential and/or may contain legally privileged information. If you have received this message by mistake or are not one of the addressees above, you may take no action based on it, and you may not copy or show it to anyone; please reply to this e-mail and point out the error which has occurred. -----------------------------------------------------------------------------------------------------